On Dec 13, 2007 11:22 AM, Gary Danko <[EMAIL PROTECTED]> wrote: > I think I found the problem. This tape device is actually two separate > units. I assumed logical device 0 (according to mtx) was /dev/nts0 and so > forth. It turns out things look like this. > > > Data Transfer Element 0 /dev/nst2 > Data Transfer Element 1 /dev/nst3 > Data Transfer Element 2 /dev/nst0 > Data Transfer Element 3 /dev/nst1 > > I was almost going to suggest that. There is no guarantee in the ordering of these Data Transfer Element versus the devices.
John ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
