Hi, I'm at last ready to recreate my catalog after a disk failure. I've posted previously about preparing for this. I've got a new fresh DB setup but bscan is failing like so:
./bscan -V* -c /etc/bacula/bacula-sd.conf -v -s -m /dev/changer bscan: butil.c:278 Could not find device "/dev/changer" in config file /etc/bacula/bacula-sd.conf. 20-Feb 23:50 bscan JobId 0: Fatal error: butil.c:168 Cannot find device "/dev/changer" in config file /etc/bacula/bacula-sd.conf. I've also tried '/dev/sg6' and 'i500-changer' instead of '/dev/changer', which are the system device name and the bacula device alias, respectively. I can succesfully access the changer and load/unload tapes like so: mtx -f /dev/changer ... (also with /dev/sg6) I've looked in the archives and elsewhere and see quite a few posts with this error, but no solutions for my situation. I tried modiying the *-dir.conf file Storage resources as well per one of the posts. The advice was to list Device as i500-changer and set Autochanger = yes. But that didn't help either. That is, I modified *-dir.conf and simply ran bscan again - would there be any other step first? Below are the relavent conf file sections. Note that I haven't changed the conf files at all and backups were working previously, so presumably the -sd.conf file was good enough for that. All that happened is my database got toasted and I'm reconstructing it. The rest of the install has stayed the same. Thanks for any advice!! -sd.conf: Autochanger { Name = i500-changer Device = LTO5-0, LTO5-1 Changer Command = "/usr/lib/bacula/mtx-changer %c %o %S %a %d" Changer Device = /dev/changer } Device { Name = LTO5-0 Media Type = LTO-5 Drive Index = 0 Archive Device = /dev/st0 Autochanger = yes AutomaticMount = yes AlwaysOpen = yes RemovableMedia = yes RandomAccess = no Maximum Changer Wait = 600 seconds; # Enable the Alert command only if you have the mtx package loaded Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" Maximum Spool Size = 60 G Maximum Job Spool Size = 12 G Spool Directory = /var/spool/bacula } Device { Name = LTO5-1 Media Type = LTO-5 Drive Index = 1 Archive Device = /dev/st1 Autochanger = yes AutomaticMount = yes AlwaysOpen = yes RemovableMedia = yes RandomAccess = no Maximum Changer Wait = 600 seconds; # Enable the Alert command only if you have the mtx package loaded Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" Maximum Spool Size = 60 G Maximum Job Spool Size = 12 G Spool Directory = /var/spool/bacula } -dir.conf (is this file actually relevant since bscan just asks for the -sd.conf file?): Storage { Name = i500-changer Address = bacula SDPort = 9103 Password = "backuppassword" Device = i500-changer Autochanger = yes Media Type = LTO-5 Maximum Concurrent Jobs = 8 } # drive #1 (NOT #0) Storage { Name = LT05-0-RAWDRIVE Address = bacula SDPort = 9103 Password = "backuppassword" Device = i500-changer Autochanger = yes Media Type = LTO-5 Maximum Concurrent Jobs = 2 } # drive #0 (NOT #1) Storage { Name = LTO5-1-RAWDRIVE Address = bacula SDPort = 9103 Password = "backuppassword" Device = i500-changer Autochanger = yes Media Type = LTO-5 Maximum Concurrent Jobs = 2 } -Michael ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users