Thanks Radoslaw, So if I bscan just one of the two Devices corresponding to the autochanger (/dev/st0 and /dev/st1), it will cycle through all the tapes still? I figure the two devices correspond to the two drives within the changer, so accessing either will work? At first I'd thought they might represent different parts of the changer, but that wouldn't really make much sense, seeing as I can load any type into either drive using mtx.
-M From: Radosław Korzeniewski [mailto:rados...@korzeniewski.net] Sent: Thursday, February 21, 2013 9:25 AM To: Michael Stauffer Cc: bacula-users Subject: Re: [Bacula-users] bscan fails: cannot find device in config file Hello, 2013/2/21 Michael Stauffer <mgsta...@gmail.com> Hi, I'm at last ready to recreate my catalog after a disk failure. I've posted previously about preparing for this. I've got a new fresh DB setup but bscan is failing like so: ./bscan -V* -c /etc/bacula/bacula-sd.conf -v -s -m /dev/changer You cannot bscan autochanger. Use Bacula Device{} for that. best regards -- Radosław Korzeniewski rados...@korzeniewski.net ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
