On 6/12/2013 2:38 PM, Dimitri Maziuk wrote:
> On 06/12/2013 01:21 PM, arnaldojsousa wrote:
>> Hi all.
>>
>> I start the configuration of bacula 5.2.13 to store data in USB disks using
>> vchanger.
>>
>> I follow these doc: http://wiki.bacula.org/doku.php?id=removable_disk
> Follow the vchangerHowto.html instead (it's in vchanger/doc in the
> tarball). Vchanger won't run as root, so use "vchanger -u bacula -g
> bacula" or whatever uid/gid is on your system. Make sure that uid/gid
> has access to the relevant files & get to where you can "load" a drive
> from command line (section 10 of the howto).
In regards to permissions:
The vchanger work directory must be writable by the uid/gid
bacula-sd runs as.
The vchanger config file must be readable by the uid/gid bacula-sd
runs as.
The filesystem on the USB drive(s) must be writable by the uid/gid
bacula-sd runs as.
>
>> The DIR, SD and FD is starting fine, but when run "label barcodes" command
>> the output is:
> ...
>> Device "usb-changer-1" has 0 slots.
> Check the uid/gid bacula-sd runs as. If it's root, you can either change
> that or add "-u bacula -g bacula" to Changer Command.
>
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
>
>
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
