Dnia 2013-06-12, śro o godzinie 11:21 -0700, arnaldojsousa pisze: > Hi all. > > I start the configuration of bacula 5.2.13 to store data in USB disks using > vchanger. > > I follow these doc: http://wiki.bacula.org/doku.php?id=removable_disk but > something is wrong or did not understand the process. > > The DIR, SD and FD is starting fine, but when run "label barcodes" command > the output is: > > *label barcodes > Automatically selected Catalog: MyCatalog > Using Catalog "MyCatalog" > Automatically selected Storage: usbchanger1 > Connecting to Storage daemon usbchanger1 at app:9103 ... > 3306 Issuing autochanger "slots" command. > Device "usb-changer-1" has 0 slots.=========================> Here > No slots in changer to scan. ===================> Here too > > The device is mounted in "/mnt/usbchanger1/magazine" using autofs > > There is bacula-sd.conf: > > # /etc/bacula/bacula-sd.conf > # ... > > # List Directors who are permitted to contact Storage daemon > # > > Storage { # definition of myself > Name = usbchanger1 > SDPort = 9103 # Director's port > WorkingDirectory = "/opt/bacula/" > Pid Directory = "/opt/bacula/bin/working" > Maximum Concurrent Jobs = 20 > SDAddress = 10.10.10.10 > } > > # List Directors who are permitted to contact Storage daemon > # > Director { > Name = app-dir > Password = "stonecold" > } > > # > # Restricted Director, used by tray-monitor to get the > # status of the storage daemon > # > Director { > Name = app-mon > Password = "stonecold" > Monitor = yes > } > > #---- local virtual autochanger with USB drive "magazines" > Autochanger { > Name = usb-changer-1 > Device = usb-changer-1-drive0 > > Changer Command = "/opt/bacula/vchanger %c %o %S %a %d" > Changer Device = "/opt/bacula/usbchanger1.conf" > } > > #--- drive 0 of the usb-changer-1 autochanger > Device { > Name = usb-changer-1-drive0 > DriveIndex = 0 > Autochanger = yes; > DeviceType = File > MediaType = File > ArchiveDevice = /mnt/usbchanger1/magazine > RemovableMedia = no; > RandomAccess = yes; > AlwaysOpen = yes; > }
Hi, Localization "/mnt/usbchanger1/magazine" is only place where are placed your volumes. It is not drive itself. I suggest looking for location of vchanger working dir. It is "work_dir" directive in /opt/bacula/usbchanger1.conf. Next you can correct your "ArchiveDevice" directive. For example, if your vchanger working directory is located in "/var/vchanger" then you should set something similar to this: ArchiveDevice = "/var/vchanger/0/drive0" Please do not worry that above location does not exist. It will be created and modified by vchanger program (it will be symbolic link) during vchanger working. I agree with Dimitri about setting user and group for vchanger too. Good luck! Marcin Haba (gani) ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
