Hello Ankush, Have you tried the heartbeat configuration as Kern suggested? It seems that the storage daemon is waiting too much with vss enabled and loosing connection with fd. You have a very slow transfer rate with vss disabled. This could be worst with vss enabled and killing connection with sd before data could be transfered.
Best regards, Ana On Tue, Jun 16, 2015 at 2:07 PM, More, Ankush <ankush.m...@capgemini.com> wrote: > Hi Ana, > > > > Below is log of successful windows client backup with disable VSS :- > > > > | bacula-sd JobId 221: Elapsed time=00:35:24, Transfer rate=5.872 M > Bytes/second > > | bacula-sd JobId 221: Sending spooled attrs to the Director. Despooling > 10,917,987 bytes ... > > | bacula-dir JobId 221: Bacula bacula-dir 7.0.5 (28Jul14): > > Build OS: x86_64-redhat-linux-gnu redhat Enterprise release > > JobId: 221 > > Job: ADCMAIL01-W-BkpTape.2015-06-04_14.08.51_03 > > Backup Level: Full (upgraded from Incremental) > > Client: "ADCMAIL01-W-fd" 5.2.10 (28Jun12) Microsoft > Windows Home ServerEnterprise Edition Service Pack 2 (build > 3790),Cross-compile,Win32 > > FileSet: "Windows Set1" 2015-06-04 12:06:19 > > Pool: "File" (From Job resource) > > Catalog: "MyCatalog" (From Client resource) > > Storage: "File1" (From Job resource) > > Scheduled time: 04-Jun-2015 14:08:49 > > Start time: 04-Jun-2015 14:08:54 > > End time: 04-Jun-2015 14:44:23 > > Elapsed time: 35 mins 29 secs > > Priority: 10 > > FD Files Written: 43,826 > > SD Files Written: 43,826 > > FD Bytes Written: 12,467,180,231 (12.46 GB) > > SD Bytes Written: 12,474,022,400 (12.47 GB) > > Rate: 5855.9 KB/s > > Software Compression: None > > VSS: no > > Encryption: no > > Accurate: no > > Volume name(s): Vol-0020 > > Volume Session Id: 1 > > Volume Session Time: 1433441310 > > Last Volume Bytes: 12,484,650,130 (12.48 GB) > > Non-fatal FD errors: 41 > > SD Errors: 0 > > FD termination status: OK > > SD termination status: OK > > Termination: Backup OK -- with warnings > > > > > > > > Thank you, > > Ankush > > > > *From:* Ana Emília M. Arruda [mailto:emiliaarr...@gmail.com] > *Sent:* 16 June 2015 19:20 > *To:* More, Ankush > *Cc:* Luc Van der Veken; Heitor Faria; Josh Fisher; > bacula-users@lists.sourceforge.net > > *Subject:* Re: [Bacula-users] Windows client VSS > > > > Hello Ankush, > > > > Could you post the result of an estimate for this job with vss disabled? > > > > Best regards, > > Ana > > > > On Tue, Jun 16, 2015 at 8:51 AM, More, Ankush <ankush.m...@capgemini.com> > wrote: > > Hello, > > > > All my windows 2008 with VSS enabled successfully backup, but windows 2003 > failed. > > Is Bacula support backup of windows client 2003 with VSS enable? > > > > Thank you, > > Ankush > > > > *From:* Luc Van der Veken [mailto:luc...@wimionline.com] > *Sent:* 15 June 2015 13:43 > *To:* Heitor Faria; More, Ankush > *Cc:* Josh Fisher; bacula-users@lists.sourceforge.net > *Subject:* RE: [Bacula-users] Windows client VSS > > > > Some quick thoughts: > > > > 1) It says “Windows Home Server” in the message. There exists no 64 > bit version of that, AFAIK. > > 2) “wmic OS get OSArchitecture” works on Vista + later only. > The fastest way on all from Windows 2000 onward is [Windows key]+[Break]. > The System Properties window that pops up will tell you if it’s 64 bit. If > it doesn’t seem to tell you anything about that, it’s 32 (for instance on > Server 2003/32 it just says “Microsoft Windows Server 2003 R2”). > > 3) I thought of the heartbeat interval too, until I noticed that the > dropped connection was between Director and SD. > I don’t consider it very likely that there’s a router or a firewall > between those, and a simple (layer 2) switch shouldn’t cause this problem. > A layer 3 switch could, but I wouldn’t expect to find one of those in a > network with home server. The switch would probably cost more than the > equipment connected to it. > > > > So basically, I’m jumping into this thread, but I don’t know the one and > only 100% correct answer either :( > > > > > > *From:* Heitor Faria [mailto:hei...@bacula.com.br] > *Sent:* 14 June 2015 15:33 > *To:* More, Ankush > *Cc:* Josh Fisher; bacula-users@lists.sourceforge.net > *Subject:* Re: [Bacula-users] Windows client VSS > > > > Yes it is 32 bit window. > > > > Client: "ADCMAIL01-W-fd" 5.2.10 (28Jun12) Microsoft > Windows Home ServerEnterprise Edition Service Pack 2 (build > 3790),Cross-compile,Win32 > > Hello Ankush: I'm pretty sure this is the Client Architeture, not OS > one. I don't use Windows, but I researched this command do fetch it from > the CLI: > > wmic OS get OSArchitecture > > Anyway, did you try Kern's advise of setting a Heartbeat Interval? This > is more likely the solution to your problem. > > > > Regards, > > =========================================================================== > Heitor Medrado de Faria - LPIC-III | ITIL-F | Bacula Systems Certified > Administrator II > > I'm a Bacula/SysAdmin looking for a job in USA or Europe. Please recommend > me. > > Need Bacula training? > https://www.udemy.com/bacula-backup-software/?couponCode=bacula-list > > +55 61 <%2B55%2061%202021-8260>8268-4220 <%2B55%2061%208268-4220> > Site: www.bacula.com.br | FB: heitor.faria > <http://www.facebook.com/heitor.faria> > > =========================================================================== > > > > Thank you, > > Ankush > > > > *From:* Josh Fisher [mailto:jfis...@pvct.com <jfis...@pvct.com>] > *Sent:* 12 June 2015 21:18 > *To:* bacula-users@lists.sourceforge.net > *Subject:* Re: [Bacula-users] Windows client VSS > > On 6/12/2015 11:03 AM, More, Ankush wrote: > > Hello, > > > > Connection has no issue. From client and server able ping/telnet to port . > > With disable VSS backup was successful. > > > > > *status client=ADCMAIL01-W-fd > > Connecting to Client ADCMAIL01-W-fd at ADCMAIL01:9102 > > > > adcmail01-fd Version: 5.2.10 (28 June 2012) VSS Linux Cross-compile Win32 > > > Are you sure this is a 32-bit Windows OS? If this is a 64-bit OS, then you > need to install the 64-bit version of Bacula client instead of the 32-bit > version. > > Daemon started 03-Jun-15 07:24. Jobs: run=16 running=0. > > Microsoft Windows Home ServerEnterprise Edition Service Pack 2 (build 3790) > > Heap: heap=0 smbytes=17,937 max_bytes=359,222 bufs=64 max_bufs=273 > > Sizeof: boffset_t=8 size_t=4 debug=0 trace=1 > > Running Jobs: > > Director connected at: 12-Jun-15 10:56 > > No Jobs running. > > > > Thank you, > > Ankush > > > > *From:* Heitor Faria [mailto:hei...@bacula.com.br <hei...@bacula.com.br>] > *Sent:* 12 June 2015 19:26 > *To:* More, Ankush > *Cc:* Radosław Korzeniewski; bacula-users > *Subject:* Re: [Bacula-users] Windows client VSS > > " Error: Director's connection to SD for this Job was lost." > > > > This is more likely to be the root cause of this error. You can > troubleshoot the connection between this Windows client and your Storage > Daemon, or post your bacula-dir Storage stanza here. > > > > Regards, > > =========================================================================== > Heitor Medrado de Faria - LPIC-III | ITIL-F | Bacula Systems Certified > Administrator II > > I'm a Bacula/SysAdmin looking for a job in USA or Europe. Please recommend > me. > > Need Bacula training? > https://www.udemy.com/bacula-backup-software/?couponCode=bacula-list > > +55 61 <%2B55%2061%202021-8260>8268-4220 <%2B55%2061%208268-4220> > Site: www.bacula.com.br | FB: heitor.faria > <http://www.facebook.com/heitor.faria> > > =========================================================================== > > > ------------------------------ > > *De: *"More, Ankush" <ankush.m...@capgemini.com> > <ankush.m...@capgemini.com> > *Para: *"Radosław Korzeniewski" <rados...@korzeniewski.net> > <rados...@korzeniewski.net> > *Cc: *"bacula-users" <bacula-users@lists.sourceforge.net> > <bacula-users@lists.sourceforge.net> > *Enviadas: *Sexta-feira, 12 de junho de 2015 10:15:11 > *Assunto: *Re: [Bacula-users] Windows client VSS > > Hello, > > > > Please find log: > > > > bacula-dir JobId 179: Start Backup JobId 179, > Job=ADCMAIL01-W-BkpTape.2015-06-03_08.22.41_26 > > | > > | bacula-dir JobId 179: Using Device "Drive-0" to write. > > | > > | adcmail01-fd JobId 179: Generate VSS snapshots. Driver="Win32 VSS", > Drive(s)="CDEFGHIJKLMNOPQRSTUVW" > > > > | adcmail01-fd JobId 179: VSS Writer (BackupComplete): "System Writer", > State: 0x1 (VSS_WS_STABLE) > > | > > | adcmail01-fd JobId 179: VSS Writer (BackupComplete): "Microsoft Exchange > Writer", State: 0x1 (VSS_WS_STABLE) > > | > > | adcmail01-fd JobId 179: VSS Writer (BackupComplete): "Event Log Writer", > State: 0x1 (VSS_WS_STABLE) > > | > > | adcmail01-fd JobId 179: VSS Writer (BackupComplete): "IIS Metabase > Writer", State: 0x1 (VSS_WS_STABLE) > > | > > | adcmail01-fd JobId 179: VSS Writer (BackupComplete): "MSDEWriter", > State: 0x1 (VSS_WS_STABLE) > > | > > | adcmail01-fd JobId 179: VSS Writer (BackupComplete): "Registry Writer", > State: 0x1 (VSS_WS_STABLE) > > | > > | adcmail01-fd JobId 179: VSS Writer (BackupComplete): "COM+ REGDB > Writer", State: 0x1 (VSS_WS_STABLE) > > | > > | adcmail01-fd JobId 179: VSS Writer (BackupComplete): "WMI Writer", > State: 0x1 (VSS_WS_STABLE) > > | > > | bacula-sd JobId 179: Elapsed time=00:00:11, Transfer rate=0 Bytes/second > > | > > | bacula-dir JobId 179: Error: Director's connection to SD for this Job > was lost. > > | > > | bacula-dir JobId 179: Error: Bacula bacula-dir 7.0.5 (28Jul14): > > Build OS: x86_64-redhat-linux-gnu redhat Enterprise release > > JobId: 179 > > Job: ADCMAIL01-W-BkpTape.2015-06-03_08.22.41_26 > > Backup Level: Full > > Client: "ADCMAIL01-W-fd" 5.2.10 (28Jun12) Microsoft > Windows Home ServerEnterprise Edition Service Pack 2 (build > 3790),Cross-compile,Win32 > > FileSet: "Windows Set1" 2015-06-02 13:50:00 > > Pool: "NonBill" (From Command input) > > Catalog: "MyCatalog" (From Client resource) > > Storage: "MSL6030" (From command line) > > Scheduled time: 03-Jun-2015 08:22:41 > > Start time: 03-Jun-2015 08:22:43 > > End time: 03-Jun-2015 08:22:55 > > Elapsed time: 12 secs > > Priority: 10 > > FD Files Written: 0 > > SD Files Written: 0 > > FD Bytes Written: 0 (0 B) > > SD Bytes Written: 0 (0 B) > > Rate: 0.0 KB/s > > Software Compression: None > > VSS: yes > > Encryption: no > > Accurate: no > > Volume name(s): > > Volume Session Id: 4 > > Volume Session Time: 1433329558 > > Last Volume Bytes: 22,772,736 (22.77 MB) > > Non-fatal FD errors: 2 > > SD Errors: 0 > > FD termination status: Error > > SD termination status: Error > > Termination: *** Backup Error *** > > > > Thank you, > > Ankush > > > > *From:* Radosław Korzeniewski [mailto:rados...@korzeniewski.net > <rados...@korzeniewski.net>] > *Sent:* 12 June 2015 17:14 > *To:* More, Ankush > *Cc:* bacula-users > *Subject:* Re: [Bacula-users] Windows client VSS > > Hello, > > Are you sure it is a whole joblog? It is very strange i.e. information > about VSS Writers never appear at the end of the log. > > You can display a joblog with bconsole command: > > * list joblog jobid=179 > > And show us the output. > > best regards > > 2015-06-11 16:21 GMT+02:00 More, Ankush <ankush.m...@capgemini.com>: > > Hi, > > > > Please find log: > > > > bacula-dir Start Backup JobId 179, > Job=ADCMAIL01-W-BkpTape.2015-06-03_08.22.41_26 > > Using Device "Drive-0" to write. > > adcmail01-fd Generate VSS snapshots. Driver="Win32 VSS", > Drive(s)="CDEFGHIJKLMNOPQRSTUVW" > > bacula-dir > > Error: Bacula bacula-dir 7.0.5 (28Jul14): > > Build OS: x86_64-redhat-linux-gnu redhat Enterprise release > > JobId: 179 > > Job: ADCMAIL01-W-BkpTape.2015-06-03_08.22.41_26 > > Backup Level: Full > > Client: "ADCMAIL01-W-fd" 5.2.10 (28Jun12) Microsoft > Windows Home ServerEnterprise Edition Service Pack 2 (build > 3790),Cross-compile,Win32 > > FileSet: "Windows Set1" 2015-06-02 13:50:00 > > Pool: "NonBill" (From Command input) > > Catalog: "MyCatalog" (From Client resource) > > Storage: "MSL6030" (From command line) > > Scheduled time: 03-Jun-2015 08:22:41 > > Start time: 03-Jun-2015 08:22:43 > > End time: 03-Jun-2015 08:22:55 > > Elapsed time: 12 secs > > Priority: 10 > > FD Files Written: 0 > > SD Files Written: 0 > > FD Bytes Written: 0 (0 B) > > SD Bytes Written: 0 (0 B) > > Rate: 0.0 KB/s > > Software Compression: None > > VSS: yes > > Encryption: no > > Accurate: no > > Volume name(s): > > Volume Session Id: 4 > > Volume Session Time: 1433329558 > > Last Volume Bytes: 22,772,736 (22.77 MB) > > Non-fatal FD errors: 2 > > SD Errors: 0 > > FD termination status: Error > > SD termination status: Error > > Termination: *** Backup Error *** > > > > Error: Director's connection to SD for this Job was lost. > > bacula-sd Elapsed time=00:00:11, Transfer rate=0 Bytes/second > > adcmail01-fd Fatal error: Generate > > adcmail01-fd VSS Writer (BackupComplete): "WMI Writer", State: 0x1 > (VSS_WS_STABLE) > > VSS Writer (BackupComplete): "COM+ REGDB Writer", State: 0x1 > (VSS_WS_STABLE) > > VSS Writer (BackupComplete): "System Writer", State: 0x1 (VSS_WS_STABLE) > > VSS Writer (BackupComplete): "Microsoft Exchange Writer", State: 0x1 > (VSS_WS_STABLE) > > VSS Writer (BackupComplete): "Event Log Writer", State: 0x1 (VSS_WS_STABLE) > > VSS Writer (BackupComplete): "IIS Metabase Writer", State: 0x1 > (VSS_WS_STABLE) > > VSS Writer (BackupComplete): "MSDEWriter", State: 0x1 (VSS_WS_STABLE) > > VSS Writer (BackupComplete): "Registry Writer", State: 0x1 (VSS_WS_STABLE) > > > > > > Thank you, > > Ankush > > > > *From:* Radosław Korzeniewski [mailto:rados...@korzeniewski.net] > *Sent:* 11 June 2015 11:14 > *To:* More, Ankush > *Cc:* bacula-users > > > *Subject:* Re: [Bacula-users] Windows client VSS > > Hello. Could you send your job log with error. It should describe what is > going on. > > Best regards > > 9 cze 2015 12:09 PM "More, Ankush" <ankush.m...@capgemini.com> napisał(a): > > Hi Pavel, > > We didn't find any error in VSS list writers all the VSS writers are > stable and no error in event log. > All the windows 2003 servers are having issue with bacula backup VSS > enabling. > > NT backup is running successfully with VSS enabled on all the windows 2003. > > > > Thank you, > > Ankush > > > > *From:* Pavel Bychikhin [mailto:pbychik...@yahoo.com] > *Sent:* 09 June 2015 13:44 > *To:* More, Ankush; bacula-users@lists.sourceforge.net > *Subject:* Re: [Bacula-users] Windows client VSS > > Hi Ankush, > > > In win 2003 the VSS service might be disabled or misconfigured. Please > take a look: > > To check if everything is working: > > *vssadmin list writers* > This has to provide a listing of writers. If there is no listing and > errors in the Event log then: > > (http://support.microsoft.com/kb/940184): > Delete > HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\EventSystem\{26c409cc-ae86-11d1-b616-00805fc79216}\Subscriptions > and Restart: > COM+ Event System > COM+ System Application > Microsoft Software Shadow Copy Provider > Volume Shadow Copy > or Restart Windows > > If previous step doesn't work then: > (http://support.microsoft.com/kb/940032) > Apply MicrosoftFixit50633.msi or manually do: > cd /d %windir%\system32 > Net stop vss > Net stop swprv > regsvr32 ole32.dll > regsvr32 oleaut32.dll > regsvr32 vss_ps.dll > vssvc /register > regsvr32 /i swprv.dll > regsvr32 /i eventcls.dll > regsvr32 es.dll > regsvr32 stdprov.dll > regsvr32 vssui.dll > regsvr32 msxml.dll > regsvr32 msxml3.dll > regsvr32 msxml4.dll > Note The last command may not run successfully. > > If previous step doesn't work then: > (http://support.microsoft.com/kb/940349) > Apply WindowsServer2003.WindowsXP-KB940349-v3-x64-ENU.exe for x64 system > And, possibly, do previous steps after that. > > Best regards, > > Pavel > > -------- Original Message -------- > *Subject: *Re: [Bacula-users] Windows client VSS > > *From: *More, Ankush <ankush.m...@capgemini.com> > <ankush.m...@capgemini.com> > *To: *bacula-users@lists.sourceforge.net > <bacula-users@lists.sourceforge.net> <bacula-users@lists.sourceforge.net> > *Date: *08.06.2015 16:47 > > Hi Team, > > > > Bacula backup successful on windows 2008 with VSS enabled. > > > > windows 2003 client backup failed with VSS enabled. > > Is VSS support on windows 2003? > > > > Thank you, > > Ankush > > > > *From:* More, Ankush > *Sent:* 08 June 2015 17:07 > *To:* 'bacula-users@lists.sourceforge.net' > *Subject:* Windows client VSS > > Hi Team, > > > > Hi Team, > > We are running Bacula server(7.0.5) on RHEL 6.x. > > If I disable VSS then Windows client get backup and if I enable VSS > (default is enable) backup failed. > > I need backup with VSS enable. > > > > Is Bacula support all windows version with VSS enable? > > > > Thank you, > > Ankush > > ------------------------------------------------------------------------------ > > _______________________________________________ > > Bacula-users mailing list > > Bacula-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > -- > > Radosław Korzeniewski > rados...@korzeniewski.net > > This message contains information that may be privileged or confidential > and is the property of the Capgemini Group. It is intended only for the > person to whom it is addressed. If you are not the intended recipient, you > are not authorized to read, print, retain, copy, disseminate, distribute, > or use this message or any part thereof. If you receive this message in > error, please notify the sender immediately and delete all copies of this > message. > > ------------------------------------------------------------------------------ > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > > Bacula-users mailing list > > Bacula-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > > >
------------------------------------------------------------------------------
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
