Hello Eric
Thanks for response, but I was looking in src/jcr.h .code and I found this
below, so I thought bacula should save the correct Level code.
/* Backup/Verify level code. These are stored in the DB */
#define L_FULL 'F' /* Full backup */
#define L_INCREMENTAL 'I' /* since last backup */
#define L_DIFFERENTIAL 'D' /* since last full backup */
#define L_SINCE 'S'
#define L_VERIFY_CATALOG 'C' /* verify from catalog */
#define L_VERIFY_INIT 'V' /* verify save (init DB) */
#define L_VERIFY_VOLUME_TO_CATALOG 'O' /* verify Volume to catalog entries
*/
#define L_VERIFY_DISK_TO_CATALOG 'd' /* verify Disk attributes to catalog
*/
#define L_VERIFY_DATA 'A' /* verify data on volume */
#define L_BASE 'B' /* Base level job */
#define L_NONE ' ' /* None, for Restore and Admin */
#define L_VIRTUAL_FULL 'f' /* Virtual full backup */
If I run a VirtualFull Is not possible to determine if it's a Full backup
or VirtualFull backup just looking in the catalog?
Another question:
In manual (pdf) says the following:
In some respects the Vbackup feature works similar to a Migration job, in
that Bacula normally reads the data from the pool specified in the Job
resource, and writes it to the Next Pool specified in the Job resource.
Note, this means that usually the output from the Virtual Backup is written
into a different pool from where your prior backups are saved.
Doing it this way guarantees that you will not get a deadlock situation
attempting to read and write to the same volume in the Storage daemon.
I've tryed to do a VirtualFull to the same Storage, but in bconsole I
receive this status:
8 Back Virt 0 0 Backup_Maquina_Wanderlei is waiting on
Storage "StorageLocal1"
I have the option "Maximum Concurrent Jobs" in all resources that are
necessary
Pool{
Name = "Daily"
Pool Type = Backup
Recycle = yes
Recycle Oldest Volume = yes
Purge Oldest Volume = yes
Autoprune = yes
LabelFormat = "Volume-Daily-${NumVolsDaily+:p/4/0/r}"
Maximum Volume Bytes = 4Gb
Maximum Volumes = 15
NextPool = "VirtualFull"
Storage = StorageLocal1
}
Pool{
Name = "VirtualFull"
Pool Type = Backup
Recycle = yes
Recycle Oldest Volume = yes
Purge Oldest Volume = yes
Autoprune = yes
LabelFormat = "Volume-VirtualFull-${NumVolsVirtualFull+:p/4/0/r}"
Maximum Volume Bytes = 4GB
Maximum Volumes = 25
Storage = StorageLocal1
}
Bacula does not allow VirtualFull to the same storage and different pool?
Atenciosamente
*Wanderlei Hüttel*
http://www.huttel.com.br
2016-07-15 2:16 GMT-03:00 Eric Bollengier <eric.bolleng...@baculasystems.com
>:
> Hello Wanderlei,
>
> On 07/14/2016 08:33 PM, Wanderlei Huttel wrote:
> > I've made some tests to check how it works VirtualFull backup, and it
> > looks worked fine, but the level of backup was saved in the database
> > with "F" (Full) not "f" (Virtual Full).
> >
> > I'm running Bacula 7.4.2
> >
> > Is this correct?
> >
>
> Yes, f means failed. A Virtual Full is seen like a Full backup in the
> database, so it uses the same code.
>
>
> Best Regards,
> Eric
>
> --
> Need professional help and support for Bacula ?
> Visit http://www.baculasystems.com
>
>
> ------------------------------------------------------------------------------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and
> traffic
> patterns at an interface-level. Reveals which users, apps, and protocols
> are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning
> reports.http://sdm.link/zohodev2dev
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
