>>>>> On Wed, 9 Aug 2017 20:51:33 -0400, Phil Stracchino said:
> 
> On 08/09/17 19:33, Phil Stracchino wrote:
> > On 08/08/17 20:50, Phil Stracchino wrote:
> >> ...It wanted the next tape INSTANTLY and gave me zero time to change it.
> >>  I had the next tape inserted and mounted less than a minute after the
> >> first tape ejected, but it was too late, the job had already failed.
> > 
> > Confirmation:  This is happening ONLY on multi-tape-spanning restores.
> > Multi-tape-spanning backup jobs are waiting perfectly politely for their
> > next tapes.
> 
> 
> Related:
> 
> Can anyone tell me what specific term I can put in my tape storage
> daemon's Messages resource to suppress the following message?
> 
> 
> 09-Aug 19:30 babylon5-sd JobId 14465: Warning: mount.c:210 Open of Tape
> device "LTO-4" (/dev/nst0) Volume "LTO4-FULL-0011" failed:
> ERR=tape_dev.c:170 Unable to open device "LTO-4" (/dev/nst0):
> ERR=Input/output error
> 09-Aug 19:30 babylon5-sd JobId 14465: Warning: mount.c:210 Open of Tape
> device "LTO-4" (/dev/nst0) Volume "LTO4-FULL-0011" failed:
> ERR=tape_dev.c:170 Unable to open device "LTO-4" (/dev/nst0):
> ERR=Input/output error
> 09-Aug 19:30 babylon5-sd JobId 14465: Warning: mount.c:210 Open of Tape
> device "LTO-4" (/dev/nst0) Volume "LTO4-FULL-0011" failed:
> ERR=tape_dev.c:170 Unable to open device "LTO-4" (/dev/nst0):
> ERR=Input/output error

You would have to block all warnings, which is not a good idea:

director = <yourdir> = all, !warning

Was this latest flood from a backup (rather than a restore)?

__Martin

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to