> On 31Jan 2018, at 12:57 AM, Cejka Rudolf <cej...@fit.vutbr.cz> wrote: > > Kenneth Garges wrote (2018/01/30): >> I???m having trouble getting a tape library to work. > > Hello, try chio status -v or mtx status. Both should return > status of your autochanger including tape labels. If they both > do return an error, do you have correct permissons on /dev/ch*? > I have the following (please note the operator group): > > bacula> ls -l /dev/ch* > crw-rw---- 1 root operator 0x9e 11 led 11:31 /dev/ch0 > bacula> id bacula > uid=366(bacula) gid=366(bacula) groups=366(bacula),0(wheel),5(operator) > > If mtx returns an error but chio does work, please try chio-changer-freebsd, > which uses FreeBSD's native chio instead of mtx from ports. > > -- > Rudolf Cejka <cejkar at fit.vutbr.cz> http://www.fit.vutbr.cz/~cejkar > Brno University of Technology, Faculty of Information Technology > Bozetechova 2, 612 66 Brno, Czech Republic
I tried chio but gave up on it because anything I did gave an "Inappropriate ioctl for device" error. Now that a reboot seems to have gotten mtx working I found that chio works too. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users