Le 27/09/2018 à 05:38, Gary Dale a écrit :
On 2018-09-26 11:33 AM, Bill Arlofski wrote:
On 09/26/2018 06:22 AM, Martin Simmons wrote:
Try
setdebug level=150 trace=1 Storage
and look for a file matching *.trace (probably in the SD's
WorkingDirectory).
...and you can also add options=t to have timestamps in the *.trace
file.
Best regards,
Bill
I was waiting for the label command to fail again. It didn't take
long. The bconsole messages were the same. The trace doesn't tell me
anything new. Hopefully you understand it better than I. Here's the
output from the trace:
#cat /var/lib/bacula/bacula-sd.trace
bacula-sd: bnet.c:566-0 who=client host=192.168.1.17 port=9103
bacula-sd: dircmd.c:178-0 Got a DIR connection at 26-Sep-2018 23:30:25
bacula-sd: cram-md5.c:69-0 send: auth cram-md5 challenge
<56845663.1538019025@bacula-sd> ssl=0
bacula-sd: cram-md5.c:133-0 cram-get received: auth cram-md5
<554803286.1538019025@bacula-dir> ssl=0
bacula-sd: cram-md5.c:157-0 sending resp to challenge:
cH+vQ7+Fdw/6P7+9R7/jRA
bacula-sd: dircmd.c:204-0 Message channel init completed.
bacula-sd: dircmd.c:806-0 Found device FileStorage
bacula-sd: dircmd.c:850-0 Found device FileStorage
bacula-sd: block_util.c:143-0 New block len=64512 block=7f19c8001160
bacula-sd: acquire.c:673-0 Attach 0xc8001c78 to dev "FileStorage"
(/home/shares/backup)
bacula-sd: vol_mgr.c:657-0 find_read_vol: read_vol_list empty.
bacula-sd: vol_mgr.c:851-0 Vol=weekly-backup-pool-37 not in use.
bacula-sd: vol_mgr.c:381-0 enter reserve_volume=weekly-backup-pool-37
drive="FileStorage" (/home/shares/backup)
bacula-sd: vol_mgr.c:286-0 new Vol=weekly-backup-pool-37 slot=0 at
7f19c8011e88 dev="FileStorage" (/home/shares/backup)
bacula-sd: vol_mgr.c:547-0 set in_use. vol=weekly-backup-pool-37
dev="FileStorage" (/home/shares/backup)
bacula-sd: vol_mgr.c:581-0 Inc walk_start use_count=2
volname=weekly-backup-pool-37
bacula-sd: vol_mgr.c:220-0 List end new volume: weekly-backup-pool-37
in_use=1 swap=0 slot=0 on file device "FileStorage" (/home/shares/backup)
bacula-sd: vol_mgr.c:693-0 Clear in_use vol=weekly-backup-pool-37 slot=0
bacula-sd: vol_mgr.c:710-0 set not reserved vol=weekly-backup-pool-37
slot=0 writers=1 reserves=0 dev="FileStorage" (/home/shares/backup)
bacula-sd: vol_mgr.c:740-0 Clear in_use vol=weekly-backup-pool-37 slot=0
bacula-sd: vol_mgr.c:746-0 Remove volume weekly-backup-pool-37 slot=0
dev="FileStorage" (/home/shares/backup)
bacula-sd: mount.c:384-3298 Again dir_find_next_append...
bacula-sd: mount.c:374-3298 No appendable volume. Calling wait_for_device
bacula-sd: wait.c:270-3298 Enter wait_for_device. busy=1 dcrvol= devvol=
bacula-sd: mount.c:384-3298 Again dir_find_next_append...
bacula-sd: mount.c:374-3298 No appendable volume. Calling wait_for_device
bacula-sd: wait.c:270-3298 Enter wait_for_device. busy=1 dcrvol= devvol=
bacula-sd: mount.c:384-3298 Again dir_find_next_append...
bacula-sd: mount.c:374-3298 No appendable volume. Calling wait_for_device
bacula-sd: wait.c:270-3298 Enter wait_for_device. busy=1 dcrvol= devvol=
Hello,
Did you add the volume before trying to label it?
Could you provide us commands you used?
HTH
Jérôme.
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
