Re: [Bacula-users] AWS S3 Backup

Kern Sibbald Fri, 19 Jul 2019 03:53:44 -0700

On 7/18/19 10:14 PM, Bryan Sockel wrote:

Looking over my setup again. I am not sure if the S3 Cloud driver is being compiled correctly. How can i tell to see if the if it was compiled correctly.

I am following the process here: https://stackoverflow.com/questions/12172504/installing-the-libs3-on-linux but with the drivers from the bacula.org website. I am never able to find the dependencies in step 5. Tried installing the 2 rpm's created with the the nodep switch.

Thank You

From: "Bryan Sockel (bryan.soc...@mdaemon.com)" <bryan.soc...@mdaemon.com>

To: "Bryan Sockel" <bryan.soc...@mdaemon.com>, "Bryan Sockel via Bacula-users (bacula-users@lists.sourceforge.net)" <bacula-users@lists.sourceforge.net>, "Kern Sibbald (k...@sibbald.com)" <k...@sibbald.com>
Date: Thu, 18 Jul 2019 10:11:07 -0500
Subject: Re: [Bacula-users] AWS S3 Backup

Should i be concerned that the plugins are being Rejected?

plugins.c:133-0 Rejected plugin: want=-sd.so name=s3 len=2
plugins.c:133-0 Rejected plugin: want=-sd.so name=libnss3.so len=10
plugins.c:133-0 Rejected plugin: want=-sd.so name=libs3.so.3 len=10

These objects (files) are not Bacula plugins. I suspect that your definition of the PluginDirectory is not pointing to the Bacula plugins directory.

You are probably using some old distro supplied configuration, which installs Bacula in may directories on your filesystem -- this is *very* bad particularly for disaster recovery. I recommend that you remove all old binaries, rebuild with the recommended Bacula ./configure set (installs almost everything in /opt/bacula/...). Then try again.

Best regards,

Kern

Thank You,

Bryan Sockel
Systems Administrator
o: 817-601-3222 ext: 233 e: bryan.soc...@mdaemon.com

MDaemon Technologies
Simple Secure Email

Visit us on Facebook | LinkedIn | YouTube

Sent using the MDaemon Messaging Server
From: "Bryan Sockel via Bacula-users (bacula-users@lists.sourceforge.net)" <bacula-users@lists.sourceforge.net>
To: "Kern Sibbald (k...@sibbald.com)" <k...@sibbald.com>, bacula-users@lists.sourceforge.net
Date: Thu, 18 Jul 2019 08:04:17 -0500
Subject: Re: [Bacula-users] AWS S3 Backup

Hello,

Here is the requested Information:

Plugin Directory = "/usr/lib64"

ls /usr/lib64/bacula-sd-cloud-driver-9.4.4.so
/usr/lib64/bacula-sd-cloud-driver-9.4.4.so

bacula-sd -d20
[root@bacula bacula]# bacula-sd: address_conf.c:274-0 Initaddr 0.0.0.0:9103
bacula-sd: init_dev.c:435-0 Open SD driver at /usr/lib64/bacula-sd-cloud-driver-9.4.4.so
bacula-sd: bnet_server.c:86-0 Addresses 0.0.0.0:9103
bacula-sd: init_dev.c:440-0 Lookup "BaculaSDdriver" in driver=cloud
bacula-sd: init_dev.c:442-0 Driver=cloud entry point=7f295e762e90
bacula-sd: stored.c:610-0 SD init done CloudStorage-1
List plugins. Hook count=0
List plugins. Hook count=0

status storage=Cloud
Connecting to Storage daemon Cloud at bacula:9103

bacula-sd Version: 9.4.4 (28 May 2019) x86_64-pc-linux-gnu redhat (Core)
Daemon started 18-Jul-19 07:48. Jobs: run=0, running=0.
Heap: heap=135,168 smbytes=31,242 max_bytes=150,467 bufs=89 max_bufs=91
Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8 mode=0,0 newbsr=0
Res: ndevices=1 nautochgr=0
Drivers: cloud

Running Jobs:
No Jobs running.
====

Jobs waiting to reserve a drive:
====

Terminated Jobs:
JobId Level Files Bytes Status Finished Name
===================================================================
1 Full 0 0 Error 17-Jul-19 16:04 BackupClient1
2 Full 0 0 Error 17-Jul-19 16:29 BackupClient1
3 Full 0 0 Error 17-Jul-19 23:15 BackupClient1
4 Full 0 0 Error 17-Jul-19 23:25 BackupCatalog
====

Device status:

Device Cloud: "CloudStorage-1" (/backups/CloudStorage) is not open.
Configured device capabilities:
EOF BSR BSF FSR FSF EOM !REM RACCESS AUTOMOUNT LABEL !ANONVOLS !ALWAYSOPEN
Device state:
!OPENED !TAPE !LABEL !APPEND !READ !EOT !WEOT !EOF !WORM !NEXTVOL !SHORT !MOUNTED !MALLOC
Writers=0 reserves=0 blocked=0 enabled=1 usage=0
Attached JobIds:
Device parameters:
Archive name: /backups/CloudStorage Device name: CloudStorage-1
File=0 block=0
Min block=0 Max block=0
Available Cache Space=21.05 GB
==
====

Cloud transfer status:
Uploads (0 B/s) (ETA 0 s) Queued=0 0 B, Processed=0 0 B, Done=0 0 B, Failed=0 0 B
Downloads (0 B/s) (ETA 0 s) Queued=0 0 B, Processed=0 0 B, Done=0 0 B, Failed=0 0 B
====

Used Volume status:
====

====

When running a job status just shows waiting on Storage message.

Thank You,
From: "Kern Sibbald (k...@sibbald.com)" <k...@sibbald.com>
To: Bryan Sockel <bryan.soc...@mdaemon.com>, bacula-users@lists.sourceforge.net
Date: Thu, 18 Jul 2019 12:00:22 +0200
Subject: Re: [Bacula-users] AWS S3 Backup

Hello,

Please insure that the PluginDirectory is defined in the bacula-sd.conf file. Then check and ensure that the plugin is in that directory.

Finally, the following commands could potentially help us:

stop the storage daemon

start it by hand in a shell window with -d20 as one of the options.

bconsole

status storage=xxxx

where xxxx is the name of any storage device.

The status of the plugins should be sent to the stdout of the shell window where you restarted the storage daemon.

The output of the compile and link of the storage daemon would possibly be helpful.

Best regards,

Kern

On 7/17/19 5:40 PM, Bryan Sockel via Bacula-users wrote:
Hey Guys,

Trying to setup a new backup server to run backups to an AWS S3 Bucket. I was able build both required version of the libs3 driver and bacula community install (9.4.4) and all appears to be correct. I need a little help setting up my bacula-dir and bacula-sd files in order to use the backup. I think i have the Bacula-SD file configs correct, but beyond that i am unsure of how to proceed.

bacula-sd.conf

Device {
Name = CloudStorage
Device Type = Cloud
Cloud = S3Cloud
Archive Device = /backups/CloudStorage
Maximum Part Size = 10000000
Media Type = CloudType
LabelMedia = yes
Random Access = Yes;
AutomaticMount = yes
RemovableMedia = no
AlwaysOpen = no
}

Cloud {
Name = S3Cloud
Driver = "S3"
HostName = "s3.amazonaws.com"
BucketName = "s3-test"
AccessKey = "AccessKey"
SecretKey = "SecretKey"
Protocol = HTTPS
UriStyle = VirtualHost
Truncate Cache = AfterUpload
Upload = EachPart
Region = "us-east-1"
MaximumUploadBandwidth = 5MB/s
}

Thank You

Bryan
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] AWS S3 Backup

Reply via email to