Hi,
Turns out it was the drive in the library, we had the drive replaced and
backups will run now, I just have to work out the backup errors now to
get them to complete. :-)
thanks,
Jeff di domenico.
On 11/11/2021 3:28 pm, Radosław Korzeniewski wrote:
Hello,
śr., 10 lis 2021 o 17:04 Jeffrey Di Domenico
<jdidomen...@integrafin.co.uk> napisał(a):
Hi,
Yeah see the below output from lsscsi
lsscsi -g
[8:0:0:0] tape HP Ultrium 5-SCSI Y6PW /dev/st1 /dev/sg40
[9:0:0:0] tape HP Ultrium 5-SCSI Y6PW /dev/st0
/dev/sg38
[9:0:0:1] mediumx HP MSL G3 Series 9.40 /dev/sch0
/dev/sg39
So, from I can see you have a following devices you should use:
- autochanger device: /dev/sg39
- storage device #0 /dev/nst0
- storage device #1 /dev/nst1
For the mtx command you should always use an "autochanger device" as
described above. Others simply won't work.
If i do use st0 and st1
???
Why?
[root@union bacula]# ./mtx-changer /dev/st1 listall
cannot open SCSI device '/dev/st1' - No medium found
[root@union bacula]# ./mtx-changer /dev/st0 listall
mtx: Request Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Illegal Request
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 20
mtx: Request Sense: Additional Sense Qualifier = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
READ ELEMENT STATUS Command Failed
[root@union bacula]#
You should make sure that the following command will run without any
issues: mtx -f /dev/sg39 status
Then you can move to Bacula configuration. If this command won't work
for you then Bacula won't work either.
You should check kernel logs or events at the tape library to check
what is going on. Then simply solve it.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Jeffrey Di Domenico
Systems Administrator
Direct: +44 020 7608 7463
Email:jdidomen...@integrafin.co.uk
Transact - take control
Phone: +44 (0)20 7608 4900
Web:www.transact-online.co.uk
Address: 29 Clement's Lane, London EC4N 7AE
Please consider the environment before printing this email
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
