Udo,
The results are:
[1:0:0:0] cd/dvd PLEXTOR DVDR PX-716A 1.11 /dev/sr0 /dev/sg0
[1:0:1:0] cd/dvd ASUS CRW-5232AS 1.01 /dev/sr1 /dev/sg1
[2:0:5:0] process JMR ELEC FORTRA SERIES. 1.21 - /dev/sg2
[2:2:0:0] disk MegaRAID LD 0 RAID5 1253G 414C /dev/sda /dev/sg3
[3:1:0:0] disk HP LOGICAL VOLUME 2.34 /dev/sdb /dev/sg4
[3:3:0:0] storage HP SA642 2.34 - /dev/sg5
[4:0:6:0] tape HP Ultrium 4-SCSI B35Z /dev/st0 /dev/sg6
[4:0:6:1] mediumx QUANTUM UHDL 0096 /dev/sch0 /dev/sg7
[5:0:6:0] tape SEAGATE DAT DAT72-052 A060 /dev/st1 /dev/sg8
Best regards,
Ronald
Op 08-08-2022 om 13:28 schreef Udo Kaune:
Hej Ronald,
please show the result of
lsscsi -g
br, Udo
Am 08.08.2022 um 13:00 schrieb Ronald de Haan:
Dear support group,
Sorry for bothering you, with what I think is a simple question, but
I can't figure out what is going wrong.
At this moment I have version 11 of Bacula and the Bacula
Administation Tool running on a Fedora 35 Server.
As backup drive I am using a Quantum Superloader 3 with an internal
HP LTO-4 drive connected to the onboard SCSI port.
So far I've got almost everything configured and up and running.
Up to the part the Superloader has to start working. Every time it
quits with the famous "bacula-sd JobId 548: 3991 Bad autochanger
"loaded? drive 0" command: ERR=Child exited with code 1.
Results=cannot open SCSI device '/dev/sg7' - Permission denied". So
I've read the manual and started Googling around, but I couldn't find
anything that solves my problem.
The superloader is known in the system as /dev/sch0 and also as /dev/sg7.
Both are owned by bacula and in the group bacula and have read write
and execute permissions.
The mtx-changer and mtx-changer.config have the same permissions
The drive has the same permissions, but when I remove the autochanger
part in the config, it runs flawless.
So, I returned the autochanger in the config, and run the autochanger
test from btape. No problems, everything works fine, so I concluded,
there is nothing wrong with the config file.
When I execute load/unload and slots commands as root in a terminal
window, the loader performs the asked operations.
But when I ask for a slot update from bconsole as well as BAT, the
message returned is "3306 Issuing autochanger "slots" command.
Device "Superloader3" has 0 slots."
It doesn't matter if I do this as normal user or as root, still the
same error.
I even tried to run the storage deamon as root, but that doesn't work
either.
I think I am missing something very small, but I can't figure out
what I am missing.
Can you help me out?
Best regards,
Ronald de Haan
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Bitte bedenken Sie die Umwelt, bevor Sie Mails drucken.
Please consider the environment before printing mails.
----
Integrative Netzwerke Udo Kaune
Deichstraße 6
25335 Elmshorn
Tel: +49 4121 579 69 35
Fax: +49 4121 579 69 99
Web:http://www.inet-hamburg.de
Handelsregister Pinneberg: HRA 1509 EL
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
