Hi Mansoor,
Am 12.12.2022 um 08:14 schrieb Mansoor Hafeez:
Greetings
I have a following setup against which I need a help:
1. There are two different Tape Libraries connected to Bacula where one
is handling Media of LTO7 and the other LTO4.
I hope you set up different Media Types for these.
2. I am running seperate Storage Daemons for each setup.
Two separate storage daemons would not be necessary if you have the
libraries accessible from the same host. Throughput consderations still
apply, of course.
3. The LTO4 media was previously disconnected from the Bacula but all
the Backup informations were kept in the Catalog.
4. Now media is connected again but whenever I am running the Restore,
Bacula is trying to locate the Media with the Slot Number which
exists in the Catalog and not with the new slot number although
update slots is executed.
The bconsole commaand 'update slots' will help here. Equivalent
functionality is available in BWeb / ßaculum, I think.
Cheers,
Arno
Thus can someone provide support in this matter?
Thanks and Best Regards
Mansoor
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
