Hi Arno Thanks for the reply. I have to define two Storage Daemons because there are two different Autochangers and I dont know if we can put two Autochangers in the single storage daemon configuration? The Media type is different for both Autochangers.
________________________________ From: Arno Lehmann <a...@its-lehmann.de> Sent: Monday, December 12, 2022 10:24 AM To: bacula-users@lists.sourceforge.net <bacula-users@lists.sourceforge.net> Subject: Re: [Bacula-users] Two Autochangers Hi Mansoor, Am 12.12.2022 um 08:14 schrieb Mansoor Hafeez: > Greetings > > I have a following setup against which I need a help: > > 1. There are two different Tape Libraries connected to Bacula where one > is handling Media of LTO7 and the other LTO4. I hope you set up different Media Types for these. >> The media types are different for these setups. One is LTO7 and other is >> LTO4. > 2. I am running seperate Storage Daemons for each setup. Two separate storage daemons would not be necessary if you have the libraries accessible from the same host. Throughput consderations still apply, of course. >> Can we configure two autochangers in single storage Daemon? The LTO4 will be >> used only for Restore thus it requires READ-ONLY access. > 3. The LTO4 media was previously disconnected from the Bacula but all > the Backup informations were kept in the Catalog. > 4. Now media is connected again but whenever I am running the Restore, > Bacula is trying to locate the Media with the Slot Number which > exists in the Catalog and not with the new slot number although > update slots is executed. The bconsole commaand 'update slots' will help here. Equivalent functionality is available in BWeb / ßaculum, I think. >> Here I am facing another issue, the available volume name for LTO4 is >> configured as IAH447 but the original BarCode on the Media is IAH447L4 and >> update slots is reading that Barcode instead of the original one and thus it >> is unable to load the Media for restore. Any idea what to do here as I can't >> take risk with the new volume to be written on the Media. Cheers, Arno > > Thus can someone provide support in this matter? > > Thanks and Best Regards > > Mansoor > > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Fbacula-users&data=05%7C01%7C%7C5478e1f613134106b3c708dadc124280%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638064268247385654%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Jw7bJfiqzvdhsJ13%2F0Lg%2BLdDT%2BAeSEsTGLGUHu6fNBs%3D&reserved=0 -- Arno Lehmann IT-Service Lehmann Sandstr. 6, 49080 Osnabrück _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Fbacula-users&data=05%7C01%7C%7C5478e1f613134106b3c708dadc124280%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638064268247385654%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Jw7bJfiqzvdhsJ13%2F0Lg%2BLdDT%2BAeSEsTGLGUHu6fNBs%3D&reserved=0
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
