Not new to tape storage, but it has been many years since I have worked with 
them.

Just set up a new Bacula deployment and ran a large backup of around 45TB's. 
Files are mostly large video files and then a mix of of other files like 
photos. Noticed the backup settled out at around 114MB/s which I figured was 
good for what I was backing up.

Now trying to do a full restore and was perplexed as to why the restore was a 
bit slower.  Went through a lot of diagnosis on the Proxmox server setup with 
its ZFS storage, added a SLOG, and ultimately decided that storage was not the 
bottleneck, nor was the  10G network connection.

Through more reading, it seems that the default 64K block size being used to 
write to the LTO9 drive has a lot of overhead and probably causing the slower 
backups and restores. So what is the better minimum and maximum black sizes? I 
have read 256k to 512k is good for minimums and 1M to 2M for maximum. Looking 
for some confirmations before I make any changes and do another full backup 
once all the restores are complete.


Thanks...
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to