Sorry for the second email.

The one sent this morning with the delay was from the web version of outlook. 
This one and the last one is from the Outlook app on my computer.

Robert
________________________________
From: Rob Gerber <[email protected]>
Sent: Wednesday, November 11, 2026 3:27 PM
To: Robert Webb <[email protected]>
Cc: Bill Arlofski <[email protected]>; [email protected] 
<[email protected]>
Subject: Re: [Bacula-users] LTO9 Drive Recommended Block Sizes

Hello Robert,

Bacularis is quite handy. :)

When you have an opportunity, you may find Bill's bacula backup report script 
useful as well. When I implemented it (approximately 1-1.5 years ago), I did 
find that it doesn't handle SSL communication, so you'd probably need to set up 
postfix or a similar local mail service, then point the script at that 
infrastructure.

I reviewed the headers for your first email. You sent it around the time you 
stated, it was received by one of your mail carrier's servers, then held for 4 
hours before being dispatched and rapidly relayed to the list. Not sure how you 
access headers in your email client, but once you get the full message do a 
ctrl+f for ' Nov' and/or 'Received:'
Received: from 
SJ5PPFF2528D033.namprd15.prod.outlook.com<http://SJ5PPFF2528D033.namprd15.prod.outlook.com>
 (2603:10b6:a0f:fc02::b17) by 
SJ0PR15MB4759.namprd15.prod.outlook.com<http://SJ0PR15MB4759.namprd15.prod.outlook.com>
 (2603:10b6:a03:37c::23) with Microsoft SMTP Server (version=TLS1_2, 
cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.615.8; Tue, 10 Nov 2026 
16:53:44 +0000
Received: from 
mail-northcentralusazon11022119.outbound.protection.outlook.com<http://mail-northcentralusazon11022119.outbound.protection.outlook.com>
 ([40.107.200.119] 
helo=CH5PR02CU005.outbound.protection.outlook.com<http://CH5PR02CU005.outbound.protection.outlook.com>)
 by sfi-mx-1.v28.lw.sourceforge.com<http://sfi-mx-1.v28.lw.sourceforge.com> 
with esmtps (TLS1.2:ECDHE-RSA-AES256-GCM-SHA384:256) (Exim 4.100.1) id 
1xQvHC-000000004EP-38hW for 
[email protected]<mailto:[email protected]>; 
Tue, 10 Nov 2026 23:29:19 +0000

Your most recent email's headers insist that you sent it at 13:31 UTC, with a 
less than 1 minute transit time to the mailing list servers. Are you certain 
you send your most recent email at 12:21 UTC?

I checked the headers for your email to the list back in April 2026, and I see 
a similar delay. The intial email was delayed transiting from the outlook 
outbound to the sourceforge server by about 3 hours. In your subsequent reply 
to bill (which for me, was to the list and not directly to my address), I saw a 
delay of 1.5 hours, again between the outbound outlook server to the 
sourceforge server. I would generally suspect that this is due to something on 
the outlook side, but I cannot be certain. For example there might be a 
mechanism whereby the sourceforge server refuses to accept a promptly submitted 
email because it is overloaded, but later accepts the same email when the 
sending server retries.

I'm fairly confident something between you and the list ate Bill's first email, 
likely because of the script.

If you would like to troubleshoot this further I am open to an off-list email 
exchange. In particular, I'd like to send you a few dummy script files just to 
see which emails you do and don't get. Feel free to email me directly offlist 
if you would like to do that.

This email is being sent at 20:27 UTC (Wednesday Nov 11th).

Regards,
Robert Gerber
402-237-8692
[email protected]<mailto:[email protected]>


On Wed, Nov 11, 2026 at 7:31 AM Robert Webb 
<[email protected]<mailto:[email protected]>> wrote:
Rob,

Thanks for the feedback and attaching the script. Once this big restore 
eventually finishes, I will certainly run Bill's tape test and in the tapealert 
script. I looked this morning in my spam filtering from yesterday and do not 
see the first email as being even received.

Still trying to get up to speed with Bacula, but am using bacularis as my front 
end right now.

My first email was sent at 16:53 UTC yesterday and I didn't get a delivered 
copy until 23:30 UTC. Received Bill's second email at 00:02 UTC.

Sending this at 12:31 UTC November 11th.

Robert
________________________________
From: Rob Gerber <[email protected]<mailto:[email protected]>>
Sent: Tuesday, November 10, 2026 11:13 PM
To: Robert Webb <[email protected]<mailto:[email protected]>>
Cc: Bill Arlofski <[email protected]<mailto:[email protected]>>; 
[email protected]<mailto:[email protected]> 
<[email protected]<mailto:[email protected]>>
Subject: Re: [Bacula-users] LTO9 Drive Recommended Block Sizes

Robert,

Bill attached his tape test script to his first email. Perhaps your email 
service blocked the email because it contained a script. I have renamed the 
script to not end in .sh, packed it in a password protected zip (password: 
bacula), and have re-attached it here. Please let me know if you receive it.

Regarding the tapealert script, it provides essential information about errors 
reported by the tape drive. Things like "need cleaning' or 'tape broken!'. 
Because you do not have a changer (which can monitor and report some of those 
things), I think you especially could benefit from this upgraded script.

I agree, mtx-changer probably isn't useful to you.

When you reply via email, please state the time in UTC. I will let you know 
what the received time is on my end. A reply-all should take the mailing list 
out of the equation, since you'll also be directly replying to me. Maybe you 
are having email server difficulties. As you may already know, we can also 
check the mailing list website for delivery status of an email, though I'm not 
sure how quickly those emails are displayed.

Incidentally, I received your first email from the list at 23:30 UTC.

Regards,
Robert Gerber
402-237-8692<tel:(402)%20237-8692>
[email protected]<mailto:[email protected]>


On Tue, Nov 10, 2026 at 8:52 PM Robert Webb 
<[email protected]<mailto:[email protected]>> wrote:
Hi Bill,

Thanks for the pointer to your scripts. However, not sure which ones might be 
applicable as I am using a single drive setup and no changer.

Also, I never received your first email and it took hours for mine to actually 
come through.

Robert

Get Outlook for Android<https://aka.ms/AAb9ysg>
________________________________
From: Bill Arlofski via Bacula-users 
<[email protected]<mailto:[email protected]>>
Sent: Tuesday, 10 November 2026 19:01:27
To: 
[email protected]<mailto:[email protected]> 
<[email protected]<mailto:[email protected]>>
Subject: Re: [Bacula-users] LTO9 Drive Recommended Block Sizes

Hello Robert,

Sorry for the two rapid replies, but in addition to my last email, I thought I 
might point you to two "drop-in" replacement
scripts I have written that have some better logging and additional features as 
compared to the originals shipped with Bacula
for 20+ years.

You might want to have a look at `mtx-changer-python.py` and 
`bacula-tapealert.py`, available in my Github account here:

https://github.com/waa

Hope this helps!

I look forward to news about your tape drive + Bacula experiences! :)


Bill

--
Bill Arlofski
[email protected]<mailto:[email protected]>
_______________________________________________
Bacula-users mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/bacula-users
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to