Signed-off-by: Eric Bénard <[email protected]>
---
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 90 ++++++++++----------
1 files changed, 45 insertions(+), 45 deletions(-)
diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
index bfdd9de..1869e9d 100644
--- a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
+++ b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
@@ -58,7 +58,7 @@
static struct fec_platform_data fec_info = {
.xcv_type = MII100,
- .phy_addr = 0x1F,
+ .phy_addr = 0,
};
struct imx_nand_platform_data nand_info = {
@@ -143,49 +143,6 @@ static int eukrea_cpuimx35_mmu_init(void)
}
postmmu_initcall(eukrea_cpuimx35_mmu_init);
-static int eukrea_cpuimx35_devices_init(void)
-{
-#ifdef CONFIG_USB_GADGET
- unsigned int tmp;
-#endif
- imx35_add_nand(&nand_info);
-
- devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED,
"self_raw");
- dev_add_bb_dev("self_raw", "self0");
- devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED,
"env_raw");
- dev_add_bb_dev("env_raw", "env0");
-
- imx35_add_fec(&fec_info);
- imx35_add_fb(&ipu_fb_data);
-
- imx35_add_i2c0(NULL);
- imx35_add_mmc0(NULL);
-
- /* led default off */
- gpio_direction_output(32 * 2 + 29, 1);
-
- /* Switch : input */
- gpio_direction_input(32 * 2 + 25);
-
-#ifdef CONFIG_USB
- imx35_usb_init();
- add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
-#endif
-#ifdef CONFIG_USB_GADGET
- /* Workaround ENGcm09152 */
- tmp = readl(IMX_OTG_BASE + 0x608);
- writel(tmp | (1 << 23), IMX_OTG_BASE + 0x608);
- add_generic_device("fsl-udc", -1, NULL, IMX_OTG_BASE, 0x200,
- IORESOURCE_MEM, &usb_pdata);
-#endif
- armlinux_set_bootparams((void *)0x80000100);
- armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX35SD);
-
- return 0;
-}
-
-device_initcall(eukrea_cpuimx35_devices_init);
-
static struct pad_desc eukrea_cpuimx35_pads[] = {
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
@@ -230,11 +187,54 @@ static struct pad_desc eukrea_cpuimx35_pads[] = {
MX35_PAD_LD19__GPIO3_25,
};
-static int eukrea_cpuimx35_console_init(void)
+static int eukrea_cpuimx35_devices_init(void)
{
+#ifdef CONFIG_USB_GADGET
+ unsigned int tmp;
+#endif
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
ARRAY_SIZE(eukrea_cpuimx35_pads));
+ imx35_add_nand(&nand_info);
+
+ devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED,
"self_raw");
+ dev_add_bb_dev("self_raw", "self0");
+ devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED,
"env_raw");
+ dev_add_bb_dev("env_raw", "env0");
+
+ imx35_add_fec(&fec_info);
+ imx35_add_fb(&ipu_fb_data);
+
+ imx35_add_i2c0(NULL);
+ imx35_add_mmc0(NULL);
+
+ /* led default off */
+ gpio_direction_output(32 * 2 + 29, 1);
+
+ /* Switch : input */
+ gpio_direction_input(32 * 2 + 25);
+
+#ifdef CONFIG_USB
+ imx35_usb_init();
+ add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
+#endif
+#ifdef CONFIG_USB_GADGET
+ /* Workaround ENGcm09152 */
+ tmp = readl(IMX_OTG_BASE + 0x608);
+ writel(tmp | (1 << 23), IMX_OTG_BASE + 0x608);
+ add_generic_device("fsl-udc", -1, NULL, IMX_OTG_BASE, 0x200,
+ IORESOURCE_MEM, &usb_pdata);
+#endif
+ armlinux_set_bootparams((void *)0x80000100);
+ armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX35SD);
+
+ return 0;
+}
+
+device_initcall(eukrea_cpuimx35_devices_init);
+
+static int eukrea_cpuimx35_console_init(void)
+{
/* screen default on to prevent flicker */
gpio_direction_output(4, 0);
/* backlight default off */
--
1.7.7.6
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
