On Tue, Jun 26, 2012 at 11:51:45AM +0200, Jan Luebbe wrote:
> Signed-off-by: Jan Luebbe <[email protected]>
> ---
> +++ b/arch/arm/mach-davinci/mux.c
> @@ -0,0 +1,78 @@
> +/*
> + * Utility to set the DAVINCI MUX register from a table in mux.h
> + *
> + * Author: Vladimir Barinov, MontaVista Software, Inc. <[email protected]>
> + *
> + * Based on linux/arch/arm/plat-omap/mux.c:
> + * Copyright (C) 2003 - 2005 Nokia Corporation
> + *
> + * Written by Tony Lindgren
> + *
> + * 2007 (c) MontaVista Software, Inc. This file is licensed under
> + * the terms of the GNU General Public License version 2. This program
> + * is licensed "as is" without any warranty of any kind, whether express
> + * or implied.
> + *
> + * Copyright (C) 2008 Texas Instruments.
> + */
> +
> +#include <config.h>
> +#include <common.h>
> +#include <errno.h>
> +#include <io.h>
> +
> +#include <mach/da8xx.h>
> +#include <mach/mux.h>
> +
> +static void *pinmux_base = (void*)DA8XX_SYSCFG0_BASE + 0x120;
> +
> +/*
> + * Sets the DAVINCI MUX register
> + */
> +int davinci_cfg_reg(const struct mux_config *cfg)
> +{
> +     unsigned int reg_orig = 0, reg = 0;
> +     unsigned int mask, warn = 0;
> +
> +     /* Update the mux register in question */
> +     if (cfg->mask) {
> +             unsigned        tmp1, tmp2;
> +
> +             reg_orig = readl(pinmux_base + cfg->mux_reg);
> +
> +             mask = (cfg->mask << cfg->mask_offset);
> +             tmp1 = reg_orig & mask;
> +             reg = reg_orig & ~mask;
> +
> +             tmp2 = (cfg->mode << cfg->mask_offset);
> +             reg |= tmp2;
> +
> +             if (tmp1 != tmp2)
> +                     warn = 1;

Does this 'warn' mean that this function actually changes something? If
yes, the variable should better be named 'changed'.

> +
> +             writel(reg, pinmux_base + cfg->mux_reg);
> +     }
> +
> +     if (warn) {
> +#ifdef DEBUG
> +             printk("MUX: setting register %s in %s (0x%08x) = 0x%08x -> 
> 0x%08x\n", cfg->name,
> +                    cfg->mux_reg_name, (unsigned int)pinmux_base + 
> cfg->mux_reg, reg_orig, reg);
> +#endif

You can just use the debug() function without ifdefs.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to