On 17:52 Wed 05 Sep , Jan Luebbe wrote: > Signed-off-by: Jan Luebbe <[email protected]> Again NACK
drop the struct XXXX on hte reg Best Regards, J. > --- > arch/arm/mach-omap/include/mach/emac_defs.h | 53 +++ > drivers/net/Kconfig | 5 + > drivers/net/Makefile | 1 + > drivers/net/davinci_emac.c | 615 > +++++++++++++++++++++++++++ > drivers/net/davinci_emac.h | 318 ++++++++++++++ > 5 files changed, 992 insertions(+) > create mode 100644 arch/arm/mach-omap/include/mach/emac_defs.h > create mode 100644 drivers/net/davinci_emac.c > create mode 100644 drivers/net/davinci_emac.h > > diff --git a/arch/arm/mach-omap/include/mach/emac_defs.h > b/arch/arm/mach-omap/include/mach/emac_defs.h > new file mode 100644 > index 0000000..ef930fc > --- /dev/null > +++ b/arch/arm/mach-omap/include/mach/emac_defs.h > @@ -0,0 +1,53 @@ > +/* > + * Copyright (C) 2007 Sergey Kubushyn <[email protected]> > + * > + * Based on: > + * > + * > ---------------------------------------------------------------------------- > + * > + * dm644x_emac.h > + * > + * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM > + * > + * Copyright (C) 2005 Texas Instruments. > + * > + * > ---------------------------------------------------------------------------- > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > + * > ---------------------------------------------------------------------------- > + > + * Modifications: > + * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot. > + * > + */ > + > +#ifndef _AM3517_EMAC_H_ > +#define _AM3517_EMAC_H_ > + > +#define EMAC_BASE_ADDR 0x5C010000 > +#define EMAC_WRAPPER_BASE_ADDR 0x5C000000 > +#define EMAC_WRAPPER_RAM_ADDR 0x5C020000 > +#define EMAC_MDIO_BASE_ADDR 0x5C030000 > +#define EMAC_HW_RAM_ADDR 0x01E20000 > + > +#define EMAC_MDIO_BUS_FREQ 166000000 /* 166 MHZ check */ > +#define EMAC_MDIO_CLOCK_FREQ 1000000 /* 2.0 MHz */ > + > +/* SOFTRESET macro definition interferes with emac_regs structure definition > */ > +#undef SOFTRESET > + > +#define DAVINCI_EMAC_VERSION2 > + > +#endif /* _AM3517_EMAC_H_ */ > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index dac1eb9..bfde54b 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -43,6 +43,11 @@ config DRIVER_NET_SMC91111 > This option enables support for the SMSC LAN91C111 > ethernet chip. > > +config DRIVER_NET_DAVINCI_EMAC > + bool "TI Davinci/OMAP EMAC ethernet driver" > + depends on ARCH_DAVINCI || ARCH_OMAP3 > + select MIIDEV > + > config DRIVER_NET_DM9K > bool "Davicom dm9k[E|A|B] ethernet driver" > depends on HAS_DM9000 > diff --git a/drivers/net/Makefile b/drivers/net/Makefile > index 951a220..52611f8 100644 > --- a/drivers/net/Makefile > +++ b/drivers/net/Makefile > @@ -1,6 +1,7 @@ > obj-$(CONFIG_DRIVER_NET_CS8900) += cs8900.o > obj-$(CONFIG_DRIVER_NET_SMC911X) += smc911x.o > obj-$(CONFIG_DRIVER_NET_SMC91111) += smc91111.o > +obj-$(CONFIG_DRIVER_NET_DAVINCI_EMAC) += davinci_emac.o > obj-$(CONFIG_DRIVER_NET_DM9K) += dm9k.o > obj-$(CONFIG_DRIVER_NET_NETX) += netx_eth.o > obj-$(CONFIG_DRIVER_NET_AT91_ETHER) += at91_ether.o > diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c > new file mode 100644 > index 0000000..3615f96 > --- /dev/null > +++ b/drivers/net/davinci_emac.c > @@ -0,0 +1,615 @@ > +/* > + * Copyright (C) 2012 Jan Luebbe <[email protected]> > + * > + * Ethernet driver for TI TMS320DM644x (DaVinci) chips. > + * > + * Copyright (C) 2007 Sergey Kubushyn <[email protected]> > + * > + * Parts shamelessly stolen from TI's dm644x_emac.c. Original copyright > + * follows: > + * > + * > ---------------------------------------------------------------------------- > + * > + * dm644x_emac.c > + * > + * TI DaVinci (DM644X) EMAC peripheral driver source for DV-EVM > + * > + * Copyright (C) 2005 Texas Instruments. > + * > + * > ---------------------------------------------------------------------------- > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > + * > ---------------------------------------------------------------------------- > + > + * Modifications: > + * ver. 1.0: Sep 2005, Anant Gole - Created EMAC version for uBoot. > + * ver 1.1: Nov 2005, Anant Gole - Extended the RX logic for multiple > descriptors > + * > + */ > + > +#include <common.h> > +#include <io.h> > +#include <clock.h> > +#include <net.h> > +#include <miidev.h> > +#include <malloc.h> > +#include <init.h> > +#include <asm/mmu.h> > +#include <asm/system.h> > +#include <mach/emac_defs.h> > +#include "davinci_emac.h" > + > +struct davinci_emac_priv { > + struct device_d *dev; > + struct eth_device edev; > + struct mii_device miidev; > + > + /* EMAC Addresses */ > + struct emac_regs *adap_emac; /* = EMAC_BASE_ADDR */ > + struct ewrap_regs *adap_ewrap; /* = EMAC_WRAPPER_BASE_ADDR */ > + struct mdio_regs *adap_mdio; /* = EMAC_MDIO_BASE_ADDR */ > + > + /* EMAC descriptors */ > + struct emac_desc *emac_rx_desc; /* = EMAC_WRAPPER_RAM_ADDR + > EMAC_RX_DESC_BASE */ > + struct emac_desc *emac_tx_desc; /* = EMAC_WRAPPER_RAM_ADDR + > EMAC_TX_DESC_BASE */ > + struct emac_desc *emac_rx_active_head; /* = 0 */ > + struct emac_desc *emac_rx_active_tail; /* = 0 */ > + int emac_rx_queue_active; /* = 0 */ > + > + /* Receive packet buffers */ > + unsigned char *emac_rx_buffers; /* [EMAC_MAX_RX_BUFFERS * > (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)] */ > + > + /* PHY address for a discovered PHY (0xff - not found) */ > + uint8_t active_phy_addr; /* = 0xff */ > + > + /* mac_addr[0] goes out on the wire first */ > + uint8_t mac_addr[6]; > +}; > + > +#ifdef EMAC_HW_RAM_ADDR > +static inline uint32_t BD_TO_HW(struct emac_desc *x) > +{ > + if (x == 0) > + return 0; > + > + return (uint32_t)(x) - EMAC_WRAPPER_RAM_ADDR + EMAC_HW_RAM_ADDR; > +} > + > +static inline struct emac_desc* HW_TO_BD(uint32_t x) > +{ > + if (x == 0) > + return 0; > + > + return (struct emac_desc*)(x - EMAC_HW_RAM_ADDR + > EMAC_WRAPPER_RAM_ADDR); > +} > +#else > +#define BD_TO_HW(x) (x) > +#define HW_TO_BD(x) (x) > +#endif > + > +static void davinci_eth_mdio_enable(struct davinci_emac_priv *priv) > +{ > + uint32_t clkdiv; > + > + clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; > + > + dev_dbg(priv->dev, "mdio_enable + 0x%08x\n", priv->adap_mdio->CONTROL); > + writel((clkdiv & 0xff) | > + MDIO_CONTROL_ENABLE | > + MDIO_CONTROL_FAULT | > + MDIO_CONTROL_FAULT_ENABLE, > + &priv->adap_mdio->CONTROL); > + dev_dbg(priv->dev, "mdio_enable - 0x%08x\n", priv->adap_mdio->CONTROL); > + > + while (readl(&priv->adap_mdio->CONTROL) & MDIO_CONTROL_IDLE); > +} > + > +/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise > */ > +static int davinci_eth_phy_read(struct davinci_emac_priv *priv, uint8_t > phy_addr, uint8_t reg_num, uint16_t *data) > +{ > + int tmp; > + > + while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO); > + > + writel(MDIO_USERACCESS0_GO | > + MDIO_USERACCESS0_WRITE_READ | > + ((reg_num & 0x1f) << 21) | > + ((phy_addr & 0x1f) << 16), > + &priv->adap_mdio->USERACCESS0); > + > + /* Wait for command to complete */ > + while ((tmp = readl(&priv->adap_mdio->USERACCESS0)) & > MDIO_USERACCESS0_GO); > + > + if (tmp & MDIO_USERACCESS0_ACK) { > + *data = tmp & 0xffff; > + dev_dbg(priv->dev, "emac_phy_read: addr=0x%02x reg=0x%02x > data=0x%04x\n", > + phy_addr, reg_num, *data); > + return 1; > + } > + > + *data = -1; > + return 0; > +} > + > +/* Write to a PHY register via MDIO inteface. Blocks until operation is > complete. */ > +static int davinci_eth_phy_write(struct davinci_emac_priv *priv, uint8_t > phy_addr, uint8_t reg_num, uint16_t data) > +{ > + > + while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO); > + > + dev_dbg(priv->dev, "emac_phy_write: addr=0x%02x reg=0x%02x > data=0x%04x\n", > + phy_addr, reg_num, data); > + writel(MDIO_USERACCESS0_GO | > + MDIO_USERACCESS0_WRITE_WRITE | > + ((reg_num & 0x1f) << 21) | > + ((phy_addr & 0x1f) << 16) | > + (data & 0xffff), > + &priv->adap_mdio->USERACCESS0); > + > + /* Wait for command to complete */ > + while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO); > + > + return 1; > +} > + > +static int davinci_miidev_read(struct mii_device *dev, int addr, int reg) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv > *)dev->edev->priv; > + uint16_t value = 0; > + return davinci_eth_phy_read(priv, addr, reg, &value) ? value : -1; > +} > + > +static int davinci_miidev_write(struct mii_device *dev, int addr, int reg, > int value) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv > *)dev->edev->priv; > + return davinci_eth_phy_write(priv, addr, reg, value) ? 0 : -1; > +} > + > +static int davinci_emac_get_ethaddr(struct eth_device *edev, unsigned char > *adr) > +{ > + return -1; > +} > + > +/* > + * This function must be called before emac_open() if you want to override > + * the default mac address. > + */ > +static int davinci_emac_set_ethaddr(struct eth_device *edev, unsigned char > *addr) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv; > + int i; > + > + for (i = 0; i < sizeof(priv->mac_addr); i++) > + priv->mac_addr[i] = addr[i]; > + return 0; > +} > + > +static int davinci_emac_init(struct eth_device *edev) > +{ > + dev_dbg(&edev->dev, "* emac_init\n"); > + return 0; > +} > + > +static int davinci_emac_open(struct eth_device *edev) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv; > + > + uint32_t clkdiv, cnt; > + struct emac_desc *rx_desc; > + unsigned long mac_hi, mac_lo; > + int ret; > + > + dev_dbg(priv->dev, "+ emac_open\n"); > + > + dev_dbg(priv->dev, "emac->TXIDVER: 0x%08x\n", priv->adap_emac->TXIDVER); > + dev_dbg(priv->dev, "emac->RXIDVER: 0x%08x\n", priv->adap_emac->RXIDVER); > + > + /* Reset EMAC module and disable interrupts in wrapper */ > + writel(1, &priv->adap_emac->SOFTRESET); > + while (readl(&priv->adap_emac->SOFTRESET) != 0); > + writel(1, &priv->adap_ewrap->softrst); > + while (readl(&priv->adap_ewrap->softrst) != 0); > + > + writel(0, &priv->adap_ewrap->c0rxen); > + writel(0, &priv->adap_ewrap->c1rxen); > + writel(0, &priv->adap_ewrap->c2rxen); > + writel(0, &priv->adap_ewrap->c0txen); > + writel(0, &priv->adap_ewrap->c1txen); > + writel(0, &priv->adap_ewrap->c2txen); > + writel(0, &priv->adap_ewrap->c0miscen); > + writel(0, &priv->adap_ewrap->c1miscen); > + writel(0, &priv->adap_ewrap->c2miscen); > + > + rx_desc = priv->emac_rx_desc; > + > + /* > + * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast > + * receive) > + * Use channel 0 only - other channels are disabled > + */ > + writel(0, &priv->adap_emac->MACINDEX); > + mac_hi = (priv->mac_addr[3] << 24) | > + (priv->mac_addr[2] << 16) | > + (priv->mac_addr[1] << 8) | > + (priv->mac_addr[0]); > + mac_lo = (priv->mac_addr[5] << 8) | > + (priv->mac_addr[4]); > + > + writel(mac_hi, &priv->adap_emac->MACADDRHI); > + writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH, > + &priv->adap_emac->MACADDRLO); > + > + /* Set source MAC address - REQUIRED */ > + writel(mac_hi, &priv->adap_emac->MACSRCADDRHI); > + writel(mac_lo, &priv->adap_emac->MACSRCADDRLO); > + > + /* Set DMA head and completion pointers to 0 */ > + for(cnt = 0; cnt < 8; cnt++) { > + writel(0, (void *)&priv->adap_emac->TX0HDP + 4 * cnt); > + writel(0, (void *)&priv->adap_emac->RX0HDP + 4 * cnt); > + writel(0, (void *)&priv->adap_emac->TX0CP + 4 * cnt); > + writel(0, (void *)&priv->adap_emac->RX0CP + 4 * cnt); > + } > + > + /* Clear Statistics (do this before setting MacControl register) */ > + for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++) > + writel(0, (void *)&priv->adap_emac->RXGOODFRAMES + 4 * cnt); > + > + /* No multicast addressing */ > + writel(0, &priv->adap_emac->MACHASH1); > + writel(0, &priv->adap_emac->MACHASH2); > + > + writel(0x01, &priv->adap_emac->TXCONTROL); > + writel(0x01, &priv->adap_emac->RXCONTROL); > + > + /* Create RX queue and set receive process in place */ > + priv->emac_rx_active_head = priv->emac_rx_desc; > + for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) { > + rx_desc->next = BD_TO_HW(rx_desc + 1); > + rx_desc->buffer = &priv->emac_rx_buffers[cnt * > (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; > + rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE; > + rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT; > + rx_desc++; > + } > + > + /* Set the last descriptor's "next" parameter to 0 to end the RX desc > list */ > + rx_desc--; > + rx_desc->next = 0; > + priv->emac_rx_active_tail = rx_desc; > + priv->emac_rx_queue_active = 1; > + > + /* Enable TX/RX */ > + writel(EMAC_MAX_ETHERNET_PKT_SIZE, &priv->adap_emac->RXMAXLEN); > + writel(0, &priv->adap_emac->RXBUFFEROFFSET); > + > + /* No fancy configs - Use this for promiscous for debug - > EMAC_RXMBPENABLE_RXCAFEN_ENABLE */ > + writel(EMAC_RXMBPENABLE_RXBROADEN, &priv->adap_emac->RXMBPENABLE); > + > + /* Enable ch 0 only */ > + writel(0x01, &priv->adap_emac->RXUNICASTSET); > + > + /* Enable MII interface and full duplex mode (using RMMI) */ > + writel((EMAC_MACCONTROL_MIIEN_ENABLE | > + EMAC_MACCONTROL_FULLDUPLEX_ENABLE | > + EMAC_MACCONTROL_RMIISPEED_100), > + &priv->adap_emac->MACCONTROL); > + > + /* Init MDIO & get link state */ > + clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; > + writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT, > + &priv->adap_mdio->CONTROL); > + > + /* Start receive process */ > + writel(BD_TO_HW(priv->emac_rx_desc), &priv->adap_emac->RX0HDP); > + > + ret = miidev_wait_aneg(&priv->miidev); > + if (ret) > + return ret; > + > + ret = miidev_get_status(&priv->miidev); > + if (ret < 0) > + return ret; > + > + miidev_print_status(&priv->miidev); > + > + dev_dbg(priv->dev, "- emac_open\n"); > + > + return 0; > +} > + > +/* EMAC Channel Teardown */ > +static void davinci_eth_ch_teardown(struct davinci_emac_priv *priv, int ch) > +{ > + uint32_t dly = 0xff; > + uint32_t cnt; > + > + dev_dbg(priv->dev, "+ emac_ch_teardown\n"); > + > + if (ch == EMAC_CH_TX) { > + /* Init TX channel teardown */ > + writel(0, &priv->adap_emac->TXTEARDOWN); > + for(cnt = 0; cnt != 0xfffffffc; cnt = > readl(&priv->adap_emac->TX0CP)) { > + /* Wait here for Tx teardown completion interrupt to > occur > + * Note: A task delay can be called here to pend rather > than > + * occupying CPU cycles - anyway it has been found that > teardown > + * takes very few cpu cycles and does not affect > functionality */ > + dly--; > + udelay(1); > + if (dly == 0) > + break; > + } > + writel(cnt, &priv->adap_emac->TX0CP); > + writel(0, &priv->adap_emac->TX0HDP); > + } else { > + /* Init RX channel teardown */ > + writel(0, &priv->adap_emac->RXTEARDOWN); > + for(cnt = 0; cnt != 0xfffffffc; cnt = > readl(&priv->adap_emac->RX0CP)) { > + /* Wait here for Rx teardown completion interrupt to > occur > + * Note: A task delay can be called here to pend rather > than > + * occupying CPU cycles - anyway it has been found that > teardown > + * takes very few cpu cycles and does not affect > functionality */ > + dly--; > + udelay(1); > + if (dly == 0) > + break; > + } > + writel(cnt, &priv->adap_emac->RX0CP); > + writel(0, &priv->adap_emac->RX0HDP); > + } > + > + dev_dbg(priv->dev, "- emac_ch_teardown\n"); > +} > + > +static void davinci_emac_halt(struct eth_device *edev) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv; > + > + dev_dbg(priv->dev, "+ emac_halt\n"); > + > + davinci_eth_ch_teardown(priv, EMAC_CH_TX); /* TX Channel teardown > */ > + davinci_eth_ch_teardown(priv, EMAC_CH_RX); /* RX Channel teardown > */ > + > + /* Reset EMAC module and disable interrupts in wrapper */ > + writel(1, &priv->adap_emac->SOFTRESET); > + writel(1, &priv->adap_ewrap->softrst); > + > + writel(0, &priv->adap_ewrap->c0rxen); > + writel(0, &priv->adap_ewrap->c1rxen); > + writel(0, &priv->adap_ewrap->c2rxen); > + writel(0, &priv->adap_ewrap->c0txen); > + writel(0, &priv->adap_ewrap->c1txen); > + writel(0, &priv->adap_ewrap->c2txen); > + writel(0, &priv->adap_ewrap->c0miscen); > + writel(0, &priv->adap_ewrap->c1miscen); > + writel(0, &priv->adap_ewrap->c2miscen); > + > + dev_dbg(priv->dev, "- emac_halt\n"); > +} > + > +/* > + * This function sends a single packet on the network and returns > + * positive number (number of bytes transmitted) or negative for error > + */ > +static int davinci_emac_send(struct eth_device *edev, void *packet, int > length) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv; > + uint64_t start; > + int ret_status = -1; > + > + dev_dbg(priv->dev, "+ emac_send (length %d)\n", length); > + > + /* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */ > + if (length < EMAC_MIN_ETHERNET_PKT_SIZE) { > + length = EMAC_MIN_ETHERNET_PKT_SIZE; > + } > + > + /* Populate the TX descriptor */ > + writel(0, &priv->emac_tx_desc->next); > + writel((uint8_t *) packet, &priv->emac_tx_desc->buffer); > + writel((length & 0xffff), &priv->emac_tx_desc->buff_off_len); > + writel(((length & 0xffff) | EMAC_CPPI_SOP_BIT | > + EMAC_CPPI_OWNERSHIP_BIT | > + EMAC_CPPI_EOP_BIT), > + &priv->emac_tx_desc->pkt_flag_len); > + dma_flush_range((ulong) packet, (ulong)packet + length); > + /* Send the packet */ > + writel(BD_TO_HW(priv->emac_tx_desc), &priv->adap_emac->TX0HDP); > + > + /* Wait for packet to complete or link down */ > + start = get_time_ns(); > + while (1) { > + if (readl(&priv->adap_emac->TXINTSTATRAW) & 0x01) { > + /* Acknowledge the TX descriptor */ > + writel(BD_TO_HW(priv->emac_tx_desc), > &priv->adap_emac->TX0CP); > + ret_status = length; > + break; > + } > + if (is_timeout(start, 100 * MSECOND)) { > + ret_status = -ETIMEDOUT; > + break; > + } > + } > + > + dev_dbg(priv->dev, "- emac_send (ret_status %i)\n", ret_status); > + return ret_status; > +} > + > +/* > + * This function handles receipt of a packet from the network > + */ > +static int davinci_emac_recv(struct eth_device *edev) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv; > + struct emac_desc *rx_curr_desc; > + struct emac_desc *curr_desc; > + struct emac_desc *tail_desc; > + unsigned char *pkt; > + int status, len, ret = -1; > + > + dev_dbg(priv->dev, "+ emac_recv\n"); > + > + rx_curr_desc = priv->emac_rx_active_head; > + status = readl(&rx_curr_desc->pkt_flag_len); > + if (status & EMAC_CPPI_OWNERSHIP_BIT) { > + ret = 0; > + goto out; > + } > + > + if (status & EMAC_CPPI_RX_ERROR_FRAME) { > + /* Error in packet - discard it and requeue desc */ > + dev_warn(priv->dev, "WARN: emac_rcv_pkt: Error in packet\n"); > + } else { > + pkt = (unsigned char *)readl(&rx_curr_desc->buffer); > + len = readl(&rx_curr_desc->buff_off_len) & 0xffff; > + dev_dbg(priv->dev, "| emac_recv got packet (length %i)\n", len); > + dma_inv_range((ulong)pkt, > + (ulong)rx_curr_desc->buffer + len); > + net_receive(pkt, len); > + ret = len; > + } > + > + /* Ack received packet descriptor */ > + writel(BD_TO_HW(rx_curr_desc), &priv->adap_emac->RX0CP); > + curr_desc = rx_curr_desc; > + priv->emac_rx_active_head = HW_TO_BD(readl(&rx_curr_desc->next)); > + > + if (status & EMAC_CPPI_EOQ_BIT) { > + if (priv->emac_rx_active_head) { > + writel(BD_TO_HW(priv->emac_rx_active_head), > + &priv->adap_emac->RX0HDP); > + } else { > + priv->emac_rx_queue_active = 0; > + dev_info(priv->dev, "INFO:emac_rcv_packet: RX Queue not > active\n"); > + } > + } > + > + /* Recycle RX descriptor */ > + writel(EMAC_MAX_ETHERNET_PKT_SIZE, &rx_curr_desc->buff_off_len); > + writel(EMAC_CPPI_OWNERSHIP_BIT, &rx_curr_desc->pkt_flag_len); > + writel(0, &rx_curr_desc->next); > + > + if (priv->emac_rx_active_head == 0) { > + dev_info(priv->dev, "INFO: emac_rcv_pkt: active queue head = > 0\n"); > + priv->emac_rx_active_head = curr_desc; > + priv->emac_rx_active_tail = curr_desc; > + if (priv->emac_rx_queue_active != 0) { > + writel(BD_TO_HW(priv->emac_rx_active_head), > &priv->adap_emac->RX0HDP); > + dev_info(priv->dev, "INFO: emac_rcv_pkt: active queue > head = 0, HDP fired\n"); > + priv->emac_rx_queue_active = 1; > + } > + } else { > + tail_desc = priv->emac_rx_active_tail; > + priv->emac_rx_active_tail = curr_desc; > + writel(BD_TO_HW(curr_desc), &tail_desc->next); > + status = readl(&tail_desc->pkt_flag_len); > + if (status & EMAC_CPPI_EOQ_BIT) { > + writel(BD_TO_HW(curr_desc), &priv->adap_emac->RX0HDP); > + status &= ~EMAC_CPPI_EOQ_BIT; > + writel(status, &tail_desc->pkt_flag_len); > + } > + } > + > +out: > + dev_dbg(priv->dev, "- emac_recv\n"); > + > + return ret; > +} > + > +static int davinci_emac_probe(struct device_d *dev) > +{ > + struct davinci_emac_priv *priv; > + uint64_t start; > + > + dev_dbg(dev, "+ emac_probe\n"); > + > + priv = xzalloc(sizeof(*priv)); > + dev->priv = priv; > + > + priv->dev = dev; > + > + priv->adap_emac = (struct emac_regs *)dev_request_mem_region(dev, 0); > + priv->adap_ewrap = (struct ewrap_regs *)dev_request_mem_region(dev, 1); > + priv->adap_mdio = (struct mdio_regs *)dev_request_mem_region(dev, 2); > + > + /* EMAC descriptors */ > + priv->emac_rx_desc = (struct emac_desc *)(EMAC_WRAPPER_RAM_ADDR + > EMAC_RX_DESC_BASE); > + priv->emac_tx_desc = (struct emac_desc *)(EMAC_WRAPPER_RAM_ADDR + > EMAC_TX_DESC_BASE); > + priv->emac_rx_active_head = 0; > + priv->emac_rx_active_tail = 0; > + priv->emac_rx_queue_active = 0; > + > + /* Receive packet buffers */ > + priv->emac_rx_buffers = xmemalign(4096, EMAC_MAX_RX_BUFFERS * > (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)); > + > + /* PHY address for a discovered PHY (0xff - not found) */ > + priv->active_phy_addr = 0xff; > + > + priv->edev.priv = priv; > + priv->edev.init = davinci_emac_init; > + priv->edev.open = davinci_emac_open; > + priv->edev.halt = davinci_emac_halt; > + priv->edev.send = davinci_emac_send; > + priv->edev.recv = davinci_emac_recv; > + priv->edev.get_ethaddr = davinci_emac_get_ethaddr; > + priv->edev.set_ethaddr = davinci_emac_set_ethaddr; > + priv->edev.parent = dev; > + > + davinci_eth_mdio_enable(priv); > + > + start = get_time_ns(); > + while (1) { > + if (readl(&priv->adap_mdio->ALIVE)) > + break; > + if (is_timeout(start, 256 * MSECOND)) { > + dev_err(dev, "No ETH PHY detected!\n"); > + break; > + } > + } > + > + priv->miidev.read = davinci_miidev_read; > + priv->miidev.write = davinci_miidev_write; > + priv->miidev.address = 0x01; > + priv->miidev.flags = MIIDEV_FORCE_LINK; > + priv->miidev.edev = &priv->edev; > + priv->miidev.parent = dev; > + > + mii_register(&priv->miidev); > + > + eth_register(&priv->edev); > + > + dev_dbg(dev, "- emac_probe\n"); > + return 0; > +} > + > +static void davinci_emac_remove(struct device_d *dev) > +{ > + struct davinci_emac_priv *priv = dev->priv; > + > + davinci_emac_halt(&priv->edev); > +} > + > +static struct driver_d davinci_emac_driver = { > + .name = "davinci_emac", > + .probe = davinci_emac_probe, > + .remove = davinci_emac_remove, > +}; > + > +static int davinci_emac_register(void) > +{ > + register_driver(&davinci_emac_driver); > + return 0; > +} > + > +device_initcall(davinci_emac_register); > diff --git a/drivers/net/davinci_emac.h b/drivers/net/davinci_emac.h > new file mode 100644 > index 0000000..b5d1dfa > --- /dev/null > +++ b/drivers/net/davinci_emac.h > @@ -0,0 +1,318 @@ > +/* > + * Copyright (C) 2007 Sergey Kubushyn <[email protected]> > + * > + * Based on: > + * > + * > ---------------------------------------------------------------------------- > + * > + * dm644x_emac.h > + * > + * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM > + * > + * Copyright (C) 2005 Texas Instruments. > + * > + * > ---------------------------------------------------------------------------- > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > + * > ---------------------------------------------------------------------------- > + > + * Modifications: > + * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot. > + * > + */ > + > +#ifndef _DAVINCI_EMAC_H_ > +#define _DAVINCI_EMAC_H_ > + > +/* PHY mask - set only those phy number bits where phy is/can be connected */ > +#define EMAC_MDIO_PHY_NUM 1 > +#define EMAC_MDIO_PHY_MASK (1 << EMAC_MDIO_PHY_NUM) > + > +/* Ethernet Min/Max packet size */ > +#define EMAC_MIN_ETHERNET_PKT_SIZE 60 > +#define EMAC_MAX_ETHERNET_PKT_SIZE 1518 > +#define EMAC_PKT_ALIGN 18 /* 1518 + 18 = 1536 > (packet aligned on 32 byte boundry) */ > + > +/* Number of RX packet buffers > + * NOTE: Only 1 buffer supported as of now > + */ > +#define EMAC_MAX_RX_BUFFERS 10 > + > +/*********************************************** > + ******** Internally used macros *************** > + ***********************************************/ > + > +#define EMAC_CH_TX 1 > +#define EMAC_CH_RX 0 > + > +/* Each descriptor occupies 4 words, lets start RX desc's at 0 and > + * reserve space for 64 descriptors max > + */ > +#define EMAC_RX_DESC_BASE 0x0 > +#define EMAC_TX_DESC_BASE 0x1000 > + > +/* EMAC Teardown value */ > +#define EMAC_TEARDOWN_VALUE 0xfffffffc > + > +/* MII Status Register */ > +#define MII_STATUS_REG 1 > + > +/* Number of statistics registers */ > +#define EMAC_NUM_STATS 36 > + > + > +/* EMAC Descriptor */ > +struct emac_desc { > + uint32_t next; /* Pointer to next descriptor in chain > */ > + uint8_t *buffer; /* Pointer to data buffer */ > + uint32_t buff_off_len; /* Buffer Offset(MSW) and Length(LSW) */ > + uint32_t pkt_flag_len; /* Packet Flags(MSW) and Length(LSW) */ > +}; > + > +/* CPPI bit positions */ > +#define EMAC_CPPI_SOP_BIT (0x80000000) > +#define EMAC_CPPI_EOP_BIT (0x40000000) > +#define EMAC_CPPI_OWNERSHIP_BIT (0x20000000) > +#define EMAC_CPPI_EOQ_BIT (0x10000000) > +#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT (0x08000000) > +#define EMAC_CPPI_PASS_CRC_BIT (0x04000000) > + > +#define EMAC_CPPI_RX_ERROR_FRAME (0x03fc0000) > + > +#define EMAC_MACCONTROL_MIIEN_ENABLE (0x20) > +#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE (0x1) > +#define EMAC_MACCONTROL_GIGABIT_ENABLE (1 << 7) > +#define EMAC_MACCONTROL_GIGFORCE (1 << 17) > +#define EMAC_MACCONTROL_RMIISPEED_100 (1 << 15) > + > +#define EMAC_MAC_ADDR_MATCH (1 << 19) > +#define EMAC_MAC_ADDR_IS_VALID (1 << 20) > + > +#define EMAC_RXMBPENABLE_RXCAFEN_ENABLE (0x200000) > +#define EMAC_RXMBPENABLE_RXBROADEN (0x2000) > + > + > +#define MDIO_CONTROL_IDLE (0x80000000) > +#define MDIO_CONTROL_ENABLE (0x40000000) > +#define MDIO_CONTROL_FAULT_ENABLE (0x40000) > +#define MDIO_CONTROL_FAULT (0x80000) > +#define MDIO_USERACCESS0_GO (0x80000000) > +#define MDIO_USERACCESS0_WRITE_READ (0x0) > +#define MDIO_USERACCESS0_WRITE_WRITE (0x40000000) > +#define MDIO_USERACCESS0_ACK (0x20000000) > + > +/* Ethernet MAC Registers Structure */ > +struct emac_regs { > + uint32_t TXIDVER; > + uint32_t TXCONTROL; > + uint32_t TXTEARDOWN; > + uint8_t RSVD0[4]; > + uint32_t RXIDVER; > + uint32_t RXCONTROL; > + uint32_t RXTEARDOWN; > + uint8_t RSVD1[100]; > + uint32_t TXINTSTATRAW; > + uint32_t TXINTSTATMASKED; > + uint32_t TXINTMASKSET; > + uint32_t TXINTMASKCLEAR; > + uint32_t MACINVECTOR; > + uint8_t RSVD2[12]; > + uint32_t RXINTSTATRAW; > + uint32_t RXINTSTATMASKED; > + uint32_t RXINTMASKSET; > + uint32_t RXINTMASKCLEAR; > + uint32_t MACINTSTATRAW; > + uint32_t MACINTSTATMASKED; > + uint32_t MACINTMASKSET; > + uint32_t MACINTMASKCLEAR; > + uint8_t RSVD3[64]; > + uint32_t RXMBPENABLE; > + uint32_t RXUNICASTSET; > + uint32_t RXUNICASTCLEAR; > + uint32_t RXMAXLEN; > + uint32_t RXBUFFEROFFSET; > + uint32_t RXFILTERLOWTHRESH; > + uint8_t RSVD4[8]; > + uint32_t RX0FLOWTHRESH; > + uint32_t RX1FLOWTHRESH; > + uint32_t RX2FLOWTHRESH; > + uint32_t RX3FLOWTHRESH; > + uint32_t RX4FLOWTHRESH; > + uint32_t RX5FLOWTHRESH; > + uint32_t RX6FLOWTHRESH; > + uint32_t RX7FLOWTHRESH; > + uint32_t RX0FREEBUFFER; > + uint32_t RX1FREEBUFFER; > + uint32_t RX2FREEBUFFER; > + uint32_t RX3FREEBUFFER; > + uint32_t RX4FREEBUFFER; > + uint32_t RX5FREEBUFFER; > + uint32_t RX6FREEBUFFER; > + uint32_t RX7FREEBUFFER; > + uint32_t MACCONTROL; > + uint32_t MACSTATUS; > + uint32_t EMCONTROL; > + uint32_t FIFOCONTROL; > + uint32_t MACCONFIG; > + uint32_t SOFTRESET; > + uint8_t RSVD5[88]; > + uint32_t MACSRCADDRLO; > + uint32_t MACSRCADDRHI; > + uint32_t MACHASH1; > + uint32_t MACHASH2; > + uint32_t BOFFTEST; > + uint32_t TPACETEST; > + uint32_t RXPAUSE; > + uint32_t TXPAUSE; > + uint8_t RSVD6[16]; > + uint32_t RXGOODFRAMES; > + uint32_t RXBCASTFRAMES; > + uint32_t RXMCASTFRAMES; > + uint32_t RXPAUSEFRAMES; > + uint32_t RXCRCERRORS; > + uint32_t RXALIGNCODEERRORS; > + uint32_t RXOVERSIZED; > + uint32_t RXJABBER; > + uint32_t RXUNDERSIZED; > + uint32_t RXFRAGMENTS; > + uint32_t RXFILTERED; > + uint32_t RXQOSFILTERED; > + uint32_t RXOCTETS; > + uint32_t TXGOODFRAMES; > + uint32_t TXBCASTFRAMES; > + uint32_t TXMCASTFRAMES; > + uint32_t TXPAUSEFRAMES; > + uint32_t TXDEFERRED; > + uint32_t TXCOLLISION; > + uint32_t TXSINGLECOLL; > + uint32_t TXMULTICOLL; > + uint32_t TXEXCESSIVECOLL; > + uint32_t TXLATECOLL; > + uint32_t TXUNDERRUN; > + uint32_t TXCARRIERSENSE; > + uint32_t TXOCTETS; > + uint32_t FRAME64; > + uint32_t FRAME65T127; > + uint32_t FRAME128T255; > + uint32_t FRAME256T511; > + uint32_t FRAME512T1023; > + uint32_t FRAME1024TUP; > + uint32_t NETOCTETS; > + uint32_t RXSOFOVERRUNS; > + uint32_t RXMOFOVERRUNS; > + uint32_t RXDMAOVERRUNS; > + uint8_t RSVD7[624]; > + uint32_t MACADDRLO; > + uint32_t MACADDRHI; > + uint32_t MACINDEX; > + uint8_t RSVD8[244]; > + uint32_t TX0HDP; > + uint32_t TX1HDP; > + uint32_t TX2HDP; > + uint32_t TX3HDP; > + uint32_t TX4HDP; > + uint32_t TX5HDP; > + uint32_t TX6HDP; > + uint32_t TX7HDP; > + uint32_t RX0HDP; > + uint32_t RX1HDP; > + uint32_t RX2HDP; > + uint32_t RX3HDP; > + uint32_t RX4HDP; > + uint32_t RX5HDP; > + uint32_t RX6HDP; > + uint32_t RX7HDP; > + uint32_t TX0CP; > + uint32_t TX1CP; > + uint32_t TX2CP; > + uint32_t TX3CP; > + uint32_t TX4CP; > + uint32_t TX5CP; > + uint32_t TX6CP; > + uint32_t TX7CP; > + uint32_t RX0CP; > + uint32_t RX1CP; > + uint32_t RX2CP; > + uint32_t RX3CP; > + uint32_t RX4CP; > + uint32_t RX5CP; > + uint32_t RX6CP; > + uint32_t RX7CP; > +}; > + > +/* EMAC Wrapper Registers Structure */ > +struct ewrap_regs { > +#ifdef DAVINCI_EMAC_VERSION2 > + uint32_t idver; > + uint32_t softrst; > + uint32_t emctrl; > + uint32_t c0rxthreshen; > + uint32_t c0rxen; > + uint32_t c0txen; > + uint32_t c0miscen; > + uint32_t c1rxthreshen; > + uint32_t c1rxen; > + uint32_t c1txen; > + uint32_t c1miscen; > + uint32_t c2rxthreshen; > + uint32_t c2rxen; > + uint32_t c2txen; > + uint32_t c2miscen; > + uint32_t c0rxthreshstat; > + uint32_t c0rxstat; > + uint32_t c0txstat; > + uint32_t c0miscstat; > + uint32_t c1rxthreshstat; > + uint32_t c1rxstat; > + uint32_t c1txstat; > + uint32_t c1miscstat; > + uint32_t c2rxthreshstat; > + uint32_t c2rxstat; > + uint32_t c2txstat; > + uint32_t c2miscstat; > + uint32_t c0rximax; > + uint32_t c0tximax; > + uint32_t c1rximax; > + uint32_t c1tximax; > + uint32_t c2rximax; > + uint32_t c2tximax; > +#else > + uint8_t RSVD0[4100]; > + uint32_t EWCTL; > + uint32_t EWINTTCNT; > +#endif > +}; > + > +/* EMAC MDIO Registers Structure */ > +struct mdio_regs { > + uint32_t VERSION; > + uint32_t CONTROL; > + uint32_t ALIVE; > + uint32_t LINK; > + uint32_t LINKINTRAW; > + uint32_t LINKINTMASKED; > + uint8_t RSVD0[8]; > + uint32_t USERINTRAW; > + uint32_t USERINTMASKED; > + uint32_t USERINTMASKSET; > + uint32_t USERINTMASKCLEAR; > + uint8_t RSVD1[80]; > + uint32_t USERACCESS0; > + uint32_t USERPHYSEL0; > + uint32_t USERACCESS1; > + uint32_t USERPHYSEL1; > +}; > + > +#endif /* _DAVINCI_EMAC_H_ */ > -- > 1.7.10.4 > > > _______________________________________________ > barebox mailing list > [email protected] > http://lists.infradead.org/mailman/listinfo/barebox _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
