On Oct 16, 2012, at 11:24 PM, Sascha Hauer <[email protected]> wrote:
> On Tue, Oct 16, 2012 at 08:04:44PM +0200, Carlo Caione wrote:
>> +
>> +static struct clk ref_3_clk = {
>> + .rate = 3 * 1000 * 1000,
>> +};
>> +
>> +static struct clk ref_1_clk = {
>> + .rate = 1 * 1000 * 1000,
>> +};
>
> Add a 'select COMMON_CLK' to your Kconfig and do a:
>
> clk_dummy = clk_fixed("dummy", 0);
> clk_ref_3 = clk_fixed("ref3", 3 * 1000 * 1000);
> clk_ref_1 = clk_fixed("ref1", 1 * 1000 * 1000);
>
> Then you can drop your clk code and get a clk_dump command
> which you can use to see what clocks you have.
RFC
ok I ask here before submitting the whole set because I'm not sure if this is a
convenient solution.
I'm not sure if you are suggesting to have two different clock definition one
for clk_fixed and the other one for clkdev,
so I was thinking something like:
enum brcm_clks {
dummy, clk_ref_3, clk_ref_1, clks_max
};
static struct clk *clks[clks_max];
int brmc_clk_create(struct clk *clk, const char *con_id, const char *dev_id)
{
struct clk_lookup *clkdev;
clkdev = clkdev_alloc(clk, con_id, dev_id);
if (!clkdev)
return -ENOMEM;
clkdev_add(clkdev);
return 0;
}
static int bcm2835_clk_init(void)
{
int ret;
clks[dummy] = clk_fixed("dummy", 0);
ret = brmc_clk_create(clks[dummy], "apb_pclk", NULL);
if (ret)
goto clk_err;
clks[clk_ref_3] = clk_fixed("ref3", 3 * 1000 * 1000);
ret = brmc_clk_create(clks[clk_ref_3], NULL, "uart0-pl0110");
if (ret)
goto clk_err;
clks[clk_ref_1] = clk_fixed("ref1", 1 * 1000 * 1000);
ret = brmc_clk_create(clks[clk_ref_1], NULL, "bcm2835-cs");
if (ret)
goto clk_err;
return 0;
clk_err:
return ret;
}
postcore_initcall(bcm2835_clk_init);
Any comment on this solution?
--
Carlo Caione
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
