Calling phy_device_connect() with a PHY address of -1 will scan for a PHY in the address range of 0..PHY_MAX_ADDR and registers the first one found. This was broken by commit 09254f639c94cc7dc47fff7638dc8c7f88d700b1 "mdiobus: do not scan the bus at registration time", erroneously scanning for -1 as PHY address.
Signed-off-by: Andreas Pretzsch <[email protected]> --- patch against branch "next" / commit 129300139cbe7265c4b8b4142740c59b5b997e4d drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 8d36300..547e269 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -169,7 +169,7 @@ int phy_device_connect(struct eth_device *edev, struct mii_bus *bus, int addr, goto fail; } else { for (i = 0; i < PHY_MAX_ADDR && !edev->phydev; i++) { - dev = mdiobus_scan(bus, addr); + dev = mdiobus_scan(bus, i); if (!dev || dev->attached_dev) continue; -- 1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
