The smsc911x has a bootstrap pin for detecting an external phy. Unfortunately this is pulled into the wrong direction on the pcm037 board, so force internal phy with platform data.
Signed-off-by: Sascha Hauer <[email protected]> --- arch/arm/boards/pcm037/pcm037.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/boards/pcm037/pcm037.c b/arch/arm/boards/pcm037/pcm037.c index ff32e35..b8e55a0 100644 --- a/arch/arm/boards/pcm037/pcm037.c +++ b/arch/arm/boards/pcm037/pcm037.c @@ -31,6 +31,7 @@ #include <mach/gpio.h> #include <mach/weim.h> #include <io.h> +#include <smc911x.h> #include <asm/mmu.h> #include <partition.h> #include <generated/mach-types.h> @@ -153,6 +154,10 @@ static int pcm037_mmu_init(void) } postmmu_initcall(pcm037_mmu_init); +static struct smc911x_plat smsc9217_pdata = { + .flags = SMC911X_FORCE_INTERNAL_PHY, +}; + static int imx31_devices_init(void) { /* CS0: Nor Flash */ @@ -193,7 +198,7 @@ static int imx31_devices_init(void) * GPIO3, data width is 16 bit */ add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, MX31_CS1_BASE_ADDR, - MX31_CS1_SIZE, IORESOURCE_MEM, NULL); + MX31_CS1_SIZE, IORESOURCE_MEM, &smsc9217_pdata); #ifdef CONFIG_USB pcm037_usb_init(); -- 1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
