On Mon, Apr 15, 2013 at 02:28:45PM +0200, Jean-Christophe PLAGNIOL-VILLARD 
wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>

Applied, thanks
MSascha


> ---
>  arch/arm/boards/at91sam9m10g45ek/init.c     |   18 ++++++++++++++++++
>  arch/arm/configs/at91sam9m10g45ek_defconfig |    4 +++-
>  2 files changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c 
> b/arch/arm/boards/at91sam9m10g45ek/init.c
> index f32215d..d9a2f1f 100644
> --- a/arch/arm/boards/at91sam9m10g45ek/init.c
> +++ b/arch/arm/boards/at91sam9m10g45ek/init.c
> @@ -38,6 +38,7 @@
>  #include <mach/at91sam9_smc.h>
>  #include <gpio_keys.h>
>  #include <readkey.h>
> +#include <spi/spi.h>
>  
>  /*
>   * board revision encoding
> @@ -125,6 +126,22 @@ static void ek_add_device_mci(void)
>  static void ek_add_device_mci(void) {}
>  #endif
>  
> +static const struct spi_board_info ek_spi_devices[] = {
> +     {
> +             .name           = "mtd_dataflash",
> +             .chip_select    = 0,
> +             .max_speed_hz   = 15 * 1000 * 1000,
> +             .bus_num        = 0,
> +     }
> +};
> +
> +static void ek_add_device_spi(void)
> +{
> +     spi_register_board_info(ek_spi_devices,
> +                     ARRAY_SIZE(ek_spi_devices));
> +     at91_add_device_spi(0, NULL);
> +}
> +
>  #ifdef CONFIG_LED_GPIO
>  struct gpio_led ek_leds[] = {
>       {
> @@ -281,6 +298,7 @@ static void ek_add_device_lcdc(void) {}
>  static int at91sam9m10g45ek_devices_init(void)
>  {
>       ek_add_device_nand();
> +     ek_add_device_spi();
>       at91_add_device_eth(0, &macb_pdata);
>       ek_add_device_mci();
>       ek_add_device_usb();
> diff --git a/arch/arm/configs/at91sam9m10g45ek_defconfig 
> b/arch/arm/configs/at91sam9m10g45ek_defconfig
> index 1df34f7..7e05e95 100644
> --- a/arch/arm/configs/at91sam9m10g45ek_defconfig
> +++ b/arch/arm/configs/at91sam9m10g45ek_defconfig
> @@ -64,8 +64,10 @@ CONFIG_NET_RESOLV=y
>  CONFIG_DRIVER_NET_MACB=y
>  CONFIG_NET_USB=y
>  CONFIG_NET_USB_ASIX=y
> -# CONFIG_SPI is not set
> +CONFIG_DRIVER_SPI_ATMEL=y
>  CONFIG_MTD=y
> +# CONFIG_MTD_OOB_DEVICE is not set
> +CONFIG_MTD_DATAFLASH=y
>  CONFIG_NAND=y
>  # CONFIG_NAND_ECC_HW is not set
>  # CONFIG_NAND_ECC_HW_SYNDROME is not set
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> barebox mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to