Hi, On Tue, Oct 15, 2013 at 12:50:14PM +0200, Sascha Hauer wrote: > Similar to the OMAP boards mount the SD card to /boot and expect > the environment as /boot/barebox.env > > Signed-off-by: Sascha Hauer <[email protected]> > --- > arch/arm/boards/raspberry-pi/rpi.c | 33 +++++++++++++++++++++++++++++++-- > 1 file changed, 31 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boards/raspberry-pi/rpi.c > b/arch/arm/boards/raspberry-pi/rpi.c > index d4912cc..971a603 100644 > --- a/arch/arm/boards/raspberry-pi/rpi.c > +++ b/arch/arm/boards/raspberry-pi/rpi.c > @@ -15,6 +15,9 @@ > > #include <common.h> > #include <init.h> > +#include <fs.h> > +#include <linux/stat.h> > +#include <envfs.h> > #include <asm/armlinux.h> > #include <generated/mach-types.h> > > @@ -37,11 +40,37 @@ static int rpi_console_init(void) > } > console_initcall(rpi_console_init); > > +static int rpi_env_init(void) > +{ > + struct stat s; > + const char *diskdev = "/dev/disk0.0"; > + int ret; > + > + device_detect_by_name("mci0"); > + > + ret = stat(diskdev, &s); > + if (ret) { > + printf("no %s. using default env\n", diskdev); > + return 0; > + } > + > + mkdir("/boot", 0666); > + ret = mount(diskdev, "fat", "/boot"); > + if (ret) { > + printf("failed to mount %s\n", diskdev); > + return 0; > + } > + > + default_environment_path = "/boot/barebox.env"; > + > + return 0; > +}
I was solving the same thing just yesterday ;) What I did was to create a env/init/automount script, what's the advantage of this approach? Regards, Andre _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
