Fantastic! That works! Many thanks
Regards John -----Original Message----- From: John Parker Sent: 29 November 2013 10:27 To: 'Sascha Hauer' Cc: Baruch Siach; [email protected] Subject: RE: FW: Barebox on Karo TX25 Thank you Sascha, I'll give that a go and report back Regards John -----Original Message----- From: Sascha Hauer [mailto:[email protected]] Sent: 29 November 2013 09:46 To: John Parker Cc: Baruch Siach; [email protected] Subject: Re: FW: Barebox on Karo TX25 On Fri, Nov 29, 2013 at 08:16:21AM +0000, John Parker wrote: > Hi Baruch > > Thank you for this. I've now found this info in the reference manual - not > under the watchdog section but elsewhere - under the boot modes. > > So now I can concentrate on why the zbarebox.bin wont run! Sorry, John. I can confirm the startup is broken since: commit cf4271ee12f8ce61598a327a72026226441dca72 Author: Sascha Hauer <[email protected]> Date: Thu Jan 24 17:09:00 2013 +0100 ARM i.MX: prepare external nand boot for SoC specific entry i.MX will get SoC specific entry points for barebox. To find the correct one we have to call these from the SoC specific imx*_barebox_boot_nand_external functions. Signed-off-by: Sascha Hauer <[email protected]> Unfortunately I haven't figured out yet how to fix this. For now you could go back before this commit by checking out cf4271ee12f8ce61598a~1. This should work. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
