Signed-off-by: Holger Schurig <[email protected]>
---
commands/Kconfig | 2036 +++++++++++++++++++++++++++++++++++++++---------------
1 file changed, 1495 insertions(+), 541 deletions(-)
diff --git a/commands/Kconfig b/commands/Kconfig
index 3ef8860..fb9a036 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -12,311 +12,1218 @@ config HAS_POWEROFF
if COMMAND_SUPPORT
-menu "commands"
+menu "Commands"
-menu "scripting"
-config CMD_EDIT
+
+
+menu "Information"
+
+config CMD_DEVINFO
+ tristate
+ default y
+ prompt "devinfo"
+ help
+ Show information about devices and drivers.
+
+ devinfo [DEVICE]
+
+ If called without arguments, devinfo shows a summary of the known
+ devices and drivers.
+
+ If called with a device path being the argument, devinfo shows more
+ default information about this device and its parameters.
+
+config CMD_HELP
+ tristate
+ default y
+ prompt "help"
+ help
+ Without arguments, lists all all commands. With an argument, print
help
+ about the specified command. If the argument is 'all', then output
help
+ for all commands.
+
+ Options:
+ -a output help on all commands
+ -v verbose
+
+config CMD_IOMEM
+ tristate
+ prompt "iomem and ioport"
+ help
+ Show information about iomem/ioport usage. Pendant to
+ 'cat /proc/iomem' and 'cat /proc/ioports' under Linux.
+
+config CMD_MEMINFO
+ tristate
+ prompt "meminfo"
+ help
+ Print info about barebox' memory allocation. Example:
+
+ max system bytes = 282616
+ system bytes = 282616
+ in use bytes = 274752
+
+config CMD_REGINFO
+ depends on HAS_REGINFO
+ select REGINFO
+ tristate
+ prompt "reginfo"
+ help
+ Print register information.
+
+config CMD_REGULATOR
+ bool
+ depends on REGULATOR
+ prompt "regulator command"
+ help
+ the regulator command lists the currently registered regulators and
+ their current state.
+
+config CMD_VERSION
+ tristate
+ default y
+ depends on BANNER
+ prompt "version"
+ help
+ Pring barebox version. Example:
+
+ barebox 2014.05.0-00142-gb289373 #177 Mon May 12 20:35:55 CEST 2014
+
+# end Information commands
+endmenu
+
+
+
+
+menu "Boot"
+
+# TODO: isn't a command
+config FLEXIBLE_BOOTARGS
+ bool
+ prompt "flexible Linux bootargs generation"
+ depends on CMD_GLOBAL
+ help
+ Select this to get a more flexible bootargs generation. With this
+ option the bootargs are concatenated together from global variables
+ beginning with 'global.linux.bootargs.' and 'global.linux.mtdparts.'
+ This allows for more flexible scripting since with it it's possible
+ to replace parts of the bootargs string without reconstructing it
+ completely.
+
+config CMD_BOOT
+ tristate
+ select BOOTM
+ prompt "boot"
+ help
+ Select this for booting based on scripts. Unlike the bootm command
which
+ can boot a single image this command offers the possibility to boot
with
+ scripts (by default placed under /env/boot/). This command iterates
over
+ multiple scripts until one succeeds.
+
+ Usage: boot [-vdlmt] [BOOTSRC...]
+
+ BOOTSRC can be:
+ - a filename under /env/boot/
+ - a full path to a boot script
+ - a device name
+ - a partition name under /dev/
+ - a full path to a directory which
+ -- contains boot scripts, or
+ -- contains a loader/entries/ directory containing bootspec entries
+
+ Multiple bootsources may be given which are probed in order until
+ one succeeds.
+
+ Options:
+ -v Increase verbosity
+ -d Dryrun. See what happens but do no actually boot
+ -l List available boot sources
+ -m Show a menu with boot options
+ -t SECS specify timeout in SECS
+
+config CMD_BOOTM
+ tristate
+ default y
+ select BOOTM
+ select CRC32
+ select UIMAGE
+ select UNCOMPRESS
+ select FILETYPE
+ select GLOBALVAR
+ prompt "bootm"
+ help
+ Boot an application image
+
+ Usage: bootm [-cdaeo] IMAGE
+
+ Options:
+ -c crc check uImage data
+ -d dryrun. Check data, but do not run
+ -a ADDR specify os load address
+ -e OFFS entry point to the image relative to start (0)
+ -o DTS specify device tree
+
+
+config CMD_BOOTM_SHOW_TYPE
+ bool
+ depends on CMD_BOOTM
+ prompt "show image information"
+ help
+ Displays some tags from the uImage:
+
+ - OS type
+ - architecture,
+ - type
+ - compression method.
+
+config CMD_BOOTM_VERBOSE
+ bool
+ prompt "verbose support"
+ depends on CMD_BOOTM
+ help
+ Adds the verbose (-v switch) command line option.
+
+config CMD_BOOTM_INITRD
+ bool
+ prompt "initial RAM disk (initrd) support"
+ depends on CMD_BOOTM
+ help
+ Adds support for initial RAM disk and this two command line options:
+
+ -r INITRD specify an initrd image
+ -L ADDR specify initrd load address
+
+config CMD_BOOTM_OFTREE
+ bool
+ depends on CMD_BOOTM
+ select OFTREE
+ prompt "device tree (oftree) support"
+ help
+ Add support to pass a device tree (a.k.a Open Firmware Tree, oftree).
Adds
+ this command line option:
+
+ -o DTS specify device tre
+
+config CMD_BOOTM_OFTREE_UIMAGE
+ bool
+ prompt "support passing device tree (oftree) uImages"
+ depends on CMD_BOOTM_OFTREE
+ help
+ Support using oftree uImages. Without this only raw oftree
+ blobs can be used.
+
+config CMD_BOOTM_AIMAGE
+ bool
+ prompt "Android image support"
+ depends on CMD_BOOTM && ARM
+ help
+ Support using Android Images.
+
+config CMD_BOOTU
+ tristate
+ default y
+ depends on ARM
+ prompt "bootu"
+ help
+ Boot into already loaded Linux kernel, which must be raw
(uncompressed).
+
+ Usage: bootu ADDRESS
+
+config CMD_BOOTZ
+ tristate
+ depends on ARM
+ prompt "bootz"
+ help
+ Boot Linux zImage
+
+ Usage: bootz FILE
+
+config CMD_LINUX16
+ tristate
+ depends on X86
+ default y if X86
+ prompt "linux16"
+ help
+ Usage: linux16 [-v VESAMODE] FILE
+
+ Load kernel from FILE and boot on x86 in real-mode.
+
+ Only kernel images in bzImage format are supported by now.
+
+ For the video mode refer the Linux kernel documentation
+ 'Documentation/fb/vesafb.txt' for correct VESA mode numbers. Use 'ask'
+ instead of a number to make Linux prompt for options.
+
+ Options:
+ -v VESAMODE set VESAMODE
+
+
+config CMD_GO
+ tristate
+ prompt "go"
+ help
+ Start application at address or file
+
+ Usage: go ADDR [ARG...]
+
+ Start application at ADDR passing ARG as arguments.
+
+ If addr does not start with a digit it is interpreted as a filename
+ in which case the file is memmapped and executed
+
+config CMD_LOADB
+ depends on !CONSOLE_NONE
+ select CRC16
+ tristate
+ prompt "loadb"
+ help
+ Load binary file over serial line (Kermit)
+
+ Usage: loadb FILE
+
+ Options:
+ -f FILE download to FILE (default image.bin)
+ -o OFFS destination file OFFSet (default 0)
+ -b BAUD baudrate for download (default: console baudrate
+ -c create file if not present
+
+config CMD_LOADS
+ depends on !CONSOLE_NONE
+ tristate
+ prompt "loads"
+ help
+ Loads - load binary file over serial line (S-Records)
+
+ Usage: loads OFFS
+
+ Load S-Record file over serial line with offset OFFS.
+
+config CMD_LOADY
+ select CRC16
+ select XYMODEM
+ depends on !CONSOLE_NONE
+ tristate
+ prompt "loady"
+ help
+ Adds the loadx and loady commands:
+
+ loadx - load binary file over serial line (X-Modem)
+
+ Usage: loadx [-fptbc]
+
+ Options:
+ -f FILE download to FILE (default image.bin)
+ -o OFFS destination file OFFSet (default 0)
+ -b BAUD baudrate for download (default: console baudrate
+ -t NAME console name to use (default: current)
+ -c create file if not present
+
+
+ loady - load binary file over serial line (Y-Modem)
+
+ Usage: loady [-gtb]
+
+ Options:
+ -g use Y-Modem/G (use on lossless tty such as USB)
+ -b BAUD baudrate for download (default: console baudrate
+ -t NAME console name to use (default: current)
+
+
+config CMD_RESET
+ tristate
+ prompt "reset"
+ help
+ Perform RESET of the CPU
+
+ Usage: reset [-f]
+
+ Options:
+ -f force RESET, don't call shutdown
+
+config CMD_SAVES
+ tristate
+ depends on CMD_LOADS
+ prompt "saves"
+ help
+ Save file over serial line (S-Records)
+
+ Usage: saves OFFS LEN
+
+ Save S-Record file to serial line with offset OFFS and length LEN.
+
+config CMD_UIMAGE
+ select UIMAGE
+ tristate
+ prompt "uimage"
+ help
+ Show information about uImage and also extract and verify uImages.
+
+ Usage: uimage [-vien] FILE
+
+ Options:
+ -i show information about image
+ -v verify image
+ -e OUTFILE extract image to OUTFILE
+ -n NO use image number NO in multifile image
+
+# end Boot commands
+endmenu
+
+
+
+
+menu "Partition"
+
+config CMD_PARTITION
+ tristate
+ prompt "addpart and delpart"
+ help
+ addpart - add a partition description to a device
+
+ Usage: addpart [-n] DEVICE PART
+
+ The size and the offset can be given in decimal (without any prefix)
and
+ in hex (prefixed with 0x). Both can have an optional suffix K, M or G.
+ The size of the last partition can be specified as '-' for the
remaining
+ space on the device. This format is the same as used by the Linux
+ kernel or cmdline mtd partitions.
+
+ Options:
+ -n do not use the device name as prefix of the partition
name
+ DEVICE device being worked on
+ PART
SIZE1[@OFFSET1](NAME1)[RO],SIZE2[@OFFSET2](NAME2)[RO],...
+
+
+ delpart - delete partition(s)
+
+ Usage: delpart PART...
+
+ Delete partitions previously added to a device with addpart.
+
+config CMD_AUTOMOUNT
+ tristate
+ select FS_AUTOMOUNT
+ prompt "automount"
+ help
+ Automount allows o automatically execute a script when a certain
+ directory is accessed for the first time. The script should then make
+ this directory available (discover USB devices, bring network
interface
+ up and finally mount the filesystem).
+
+ Usage: automount [-ldr] PATH [COMMAND]
+
+ Options:
+ -l list registered automount-points
+ -d create the mount directory
+ -r remove an automountpoint
+
+config CMD_MOUNT
+ tristate
+ default y
+ prompt "mount"
+ help
+ Mount a filesystem or list mounted filesystems
+
+ Usage: mount [[-atov] [DEVICE] [MOUNTPOINT]]
+
+ If no argument is given, list mounted filesystems.
+ If no FSTYPE is specified, try to detect it automatically.
+ With -a the mount command mounts all block devices whose filesystem
+ can be detected automatically to /mnt/PARTNAME
+ If mountpoint is not given, a standard mountpoint of /mnt/DEVICE
+ is used. This directoy is created automatically if necessary.
+
+ Options:
+ -a mount all blockdevices
+ -t FSTYPE specify filesystem type
+ -o OPTIONS set file system OPTIONS
+ -v verbose
+
+config CMD_UBI
+ tristate
+ default y if MTD_UBI
+ depends on MTD_UBI
+ prompt "ubiattach, ubimkvol and ubirmvol"
+ help
+ ubiattach - attach mtd device to UBI
+
+ Usage: ubiattach [-O] MTDDEV
+
+ Options:
+ -O OFFS VID header offset
+
+
+ ubimkvol - create an UBI volume
+
+ Usage: ubimkvol UBIDEV NAME SIZE
+
+ Create an UBI volume on UBIDEV with NAME and SIZE.
+ If SIZE is 0 all available space is used for the volume.
+
+
+ ubirmvol - delete an UBI volume
+
+ Usage: ubirmvol UBIDEV NAME
+
+ Delete UBI volume NAME from UBIDEV
+
+
+config CMD_UBIFORMAT
+ tristate
+ depends on MTD_UBI
+ select LIBMTD
+ select LIBSCAN
+ select LIBUBIGEN
+ prompt "ubiformat"
+
+config CMD_UMOUNT
+ tristate
+ default y
+ prompt "umount"
+ help
+ Usage: umount MOUNTPOINT
+
+ Unmount a filesystem mounted on a specific MOINTPOINT
+
+# end Partition commands
+endmenu
+
+
+
+menu "Environment"
+
+config CMD_EXPORT
+ depends on ENVIRONMENT_VARIABLES
+ tristate
+ prompt "export"
+ help
+ Export environment variables
+
+ Usage: export VAR[=VALUE]
+
+ Export an environment variable to subsequently executed scripts.
+
+config CMD_GLOBAL
+ select GLOBALVAR
+ tristate
+ prompt "global"
+ help
+ Create or set global variables
+
+ Usage: global [-r] VAR[=VALUE]
+
+ Add a new global variable named VAR, optionally set to VALUE.
+
+ Options:
+ -r set value of all global variables beginning with 'match'
+
+config CMD_LOADENV
+ tristate
+ select ENV_HANDLING
+ prompt "loadenv"
+ help
+ Load environment from ENVFS
+
+ Usage: loadenv {-nsd] [ENVFS] [DIRECTORY]
+
+ Load environment from files in ENVFS (default /dev/env0) in
+ DIRECTORY (default /env
+
+ Options:
+ -n do not overwrite existing files
+ -s scrub old environment
+ -d load default environment
+
+config CMD_PRINTENV
+ tristate
+ depends on ENVIRONMENT_VARIABLES
+ prompt "printenv"
+ help
+ Print value of environment variables
+
+ Usage: printenv [VARIABLE]
+
+ If an argument is given, printenv prints the content of an environment
+ variable to the terminal. If no argument is specified, all variables
are
+ printed.
+
+config CMD_MAGICVAR
+ tristate
+ prompt "magicvar"
+ help
+ Barebox has some shell variables with special meanings. This
+ command shows the available magic variables.
+
+config CMD_MAGICVAR_HELP
+ bool
+ prompt "display description"
+ depends on CMD_MAGICVAR
+ help
+ Also display a description to the magic variables
+
+config CMD_SAVEENV
+ tristate
+ select ENV_HANDLING
+ prompt "saveenv"
+ help
+ Save environment to persistent storage
+
+ Usage: saveenv [ENVFS] [DIRECTORY]
+
+ Save the files in DIRECTORY to the persistent storage device ENVFS.
+
+ ENVFS is usually a block in flash but can be any other file. If
+ omitted, DIRECTORY defaults to /env and ENVFS defaults to
+ /dev/env0. Note that envfs can only handle files, directories are
being
+ skipped silently.
+
+# end Environment commands
+endmenu
+
+
+
+
+menu "File"
+
+config CMD_DIGEST
+ tristate
+ select DIGEST
+ help
+ TODO This is actually not a command, but turns on digest.c
compilation.
+
+config CMD_BASENAME
+ tristate
+ prompt "basename"
+ help
+ Usage: basename PATH VAR
+
+ Remove directory and suffix from the PATH and store result into
variable VAR.
+
+config CMD_CAT
+ tristate
+ default y
+ prompt "cat"
+ help
+ Concatenate file(s) to stdout
+
+ Usage: cat FILE...
+
+ Currently only printable characters and NL, TAB are printed.
+
+config CMD_CD
+ tristate
+ default y
+ prompt "cd"
+ help
+ Change working directory
+
+ Usage: cd DIRECTORY
+
+ If called without an argument, change to the root directory '/'.
+
+config CMD_CP
+ tristate
+ default y
+ prompt "cp"
+ help
+ Copy files
+
+ Usage: cp [-v] SRC DEST
+
+ Copy file from SRC to DEST.
+
+ Options:
+ -v verbose
+
+config CMD_DIRNAME
+ tristate
+ prompt "dirname"
+ help
+ Strip last component of file name and store the result in a
+ environment variable
+
+config CMD_FILETYPE
+ tristate
+ select FILETYPE
+ prompt "filetype"
+ help
+Detect file type
+
+ Usage: filetype [-vsl] FILE
+
+ Detect type of a file and export result to a variable.
+
+ Options:
+ -v verbose
+ -s VAR set variable VAR to shortname
+ -l list known filetypes
+
+ Detected file types are registered at runtime, depending on
+ what you have compiled into barebox. Example of "filetype -l":
+
+ known filetypes:
+ arm-zimage : arm Linux zImage
+ lzo : lzo compressed
+ lz4 : lz4 compressed
+ arm-barebox : arm barebox image
+ u-boot : U-Boot uImage
+ ubi : UBI image
+ jffs2 : JFFS2 image
+ gzip : gzip compressed
+ bzip2 : bzip2 compressed
+ dtb : open firmware flat device tree
+ android : Android boot image
+ sh : Bourne Shell
+ mips-barebox : MIPS barebox image
+ fat : FAT filesytem
+ mbr : MBR sector
+ bmp : BMP image
+ png : PNG image
+ ext : ext filesystem
+ gpt : GUID Partition Table
+ bpk : Binary PacKage
+ bbenv : barebox environment file
+
+config CMD_LN
+ tristate
+ prompt "ln"
+ help
+ Create symlink (make a new name for a file)
+
+ Usage: ln SRC DEST
+
+config CMD_LS
+ tristate
+ default y
+ prompt "ls"
+ help
+ List a file or directory
+
+ Usage: ls [-lCR] [FILEDIR...]
+
+ List information about the specified files or directories.
+
+ Options:
+ -l long format
+ -C column format (opposite of long format)
+ -R list subdirectories recursively
+
+config CMD_MD5SUM
+ tristate
+ select CMD_DIGEST
+ select MD5
+ prompt "md5sum"
+ help
+ Usage: md5sum FILE|AREA...
+
+ Calculate a MD5 digest over a FILE or a memory area.
+
+config CMD_MKDIR
+ tristate
+ default y
+ prompt "mkdir"
+ help
+ Usage: mkdir [DIRECTORY ...]
+
+ Create new directories
+
+ Options:
+ -p make parent directories as needed
+
+config CMD_PWD
+ tristate
+ default y
+ prompt "pwd"
+ help
+ Print working directory.
+
+config CMD_READLINK
+ tristate
+ prompt "readlink"
+ help
+ Read value of a symbolic link
+
+ Usage: readlink [-f] FILE VARIABLE
+
+ Read value of a symbolic link and store it into VARIABLE.
+
+ Options:
+ -f canonicalize by following first symlink
+
+config CMD_RM
+ tristate
+ default y
+ prompt "rm"
+ help
+ Remove files
+
+ Usage: rm [-r] FILES...
+
+ Options:
+ -r remove directories and their contents recursively
+
+config CMD_RMDIR
+ tristate
+ default y
+ prompt "rmdir"
+ help
+ Remove empty directory(s)
+
+ Usage: rmdir DIRECTORY...
+
+ Remove directories. The directories have to be empty.
+
+config CMD_SHA1SUM
+ tristate
+ select CMD_DIGEST
+ select SHA1
+ prompt "sha1sum"
+ help
+ Calculate SHA1 digest
+
+ Usage: sha1sum FILE|AREA
+
+ Calculate a SHA1 digest over a FILE or a memory area.
+
+config CMD_SHA224SUM
tristate
- prompt "edit"
+ select CMD_DIGEST
+ select SHA224
+ prompt "sha224sum"
+ help
+ Calculate SHA224 digest
+
+ Usage: sha224sum FILE|AREA
+
+ Calculate a SHA224 digest over a FILE or a memory area.
+
+config CMD_SHA256SUM
+ tristate
+ select CMD_DIGEST
+ select SHA256
+ prompt "sha256sum"
+ help
+ sha256sum - calculate SHA256 digest
+
+ Usage: sha256sum FILE|AREA
+
+ Calculate a SHA256 digest over a FILE or a memory area.
+
+config CMD_UNCOMPRESS
+ bool
+ select UNCOMPRESS
+ prompt "uncompress"
+ help
+ Uncompress handles lzo, gzip and bzip2 compressed files
+ depending on the compiled in compression libraries.
+
+ Usage: uncompress INFILE OUTFILE
+
+# end File commands
+endmenu
+
+
+
+
+menu "Shell scripting"
config CMD_EXEC
depends on !SHELL_HUSH
tristate
prompt "exec"
-config CMD_SLEEP
+config CMD_FALSE
tristate
- prompt "sleep"
+ default y
+ prompt "false"
+ help
+ Do nothing, unsuccessfully
+
+config CMD_LET
+ tristate
+ prompt "let"
+ help
+ Evaluate arithmetic expressions
+
+ Usage: let EXPR [EXPR ...]
+
+ Supported operations are in order of decreasing precedence:
+ X++, X--
+ ++X, --X
+ +X, -X
+ !X, ~X
+ X**Y
+ X*Y, X/Y, X%Y
+ X+Y, X-Y
+ X<<Y, X>>Y
+ X<Y, X<=Y, X>=Y, X>Y
+ X==Y, X!=Y
+ X&Y
+ X^Y
+ X|Y
+ X&&Y
+ X||Y
+ X?Y:Z
+ X*=Y, X/=Y, X%=Y
+ X=Y, X&=Y, X|=Y, X^=Y, X+=Y, X-=Y, X<<=Y, X>>=Y
config CMD_MSLEEP
tristate
prompt "msleep"
+ help
+ Delay execution for n milli-seconds
-config CMD_SAVEENV
- tristate
- select ENV_HANDLING
- prompt "saveenv"
+ Usage: msleep MILLISECONDS
-config CMD_LOADENV
+config CMD_READF
tristate
- select ENV_HANDLING
- prompt "loadenv"
+ prompt "readf"
+ help
+ Read file into variable
-config CMD_EXPORT
- depends on ENVIRONMENT_VARIABLES
+ Usage: readf FILE VAR
+
+ Read a single line from FILE into a VARiable. Leading and trailing
+ whitespaces are removed, nonvisible characters are stripped. Input is
+ limited to 1024 characters.
+
+config CMD_SLEEP
tristate
- prompt "export"
+ prompt "sleep"
+ help
+ Delay execution for n seconds
-config CMD_PRINTENV
+ Usage: sleep SECONDS
+
+config CMD_TEST
tristate
- depends on ENVIRONMENT_VARIABLES
- prompt "printenv"
+ depends on SHELL_HUSH
+ default y
+ prompt "test"
+ help
+ Minimal test command like in /bin/sh
-config CMD_READLINE
+ Usage: test [EXPR]
+
+ Options:
+ !, =, !=, -eq, -ne, -ge, -gt, -le, -lt, -o, -a, -z, -n, -d,
-e,
+ -f, -L; see 'man test' on your PC for more information.
+
+config CMD_TRUE
tristate
- prompt "readline"
+ default y
+ prompt "true"
+ help
+ Do nothing, successfully.
-config CMD_READF
+# end Scripting commands
+endmenu
+
+
+
+
+menu "Network"
+
+config CMD_MIITOOL
tristate
- prompt "readf"
+ depends on PHYLIB
+ prompt "miitool"
help
- The readf command is used to read a files content into a shell
variable.
+ The miitool command allows to view media-independent interface status.
+ The default short output reports the negotiated link speed and
+ link status for selected MII. The '-v' option displays more
+ detailed MII status information, such as MII capabilities,
+ current advertising mode, and link partner capabilities.
-config CMD_LET
+config CMD_TFTP
+ depends on FS_TFTP
tristate
- prompt "let"
+ prompt "tftp"
help
- the 'let' command is used for arithmetics. It works like the
corresponding
- Unix shell command.
+ Load (or save) a file using TFTP
-config CMD_TRUE
+ Note that barebox can mount tftp as a filesystem. Therefore
+ this 'tftp' command is only needed to preserve backward
+ compatibility.
+
+ Usage: tftp [-p] SOURCE [DEST]
+
+ Load (or save) a file via TFTP.
+
+ Options:
+ -p push to TFTP server
+
+# end Network commands
+endmenu
+
+
+
+
+menu "Console and Framebuffer interaction"
+
+config CMD_CLEAR
tristate
default y
- prompt "true"
+ prompt "clear"
+ help
+ Clear screen
-config CMD_FALSE
+ Send ANSI ESC sequence to clear the screen.
+
+config CMD_ECHO
tristate
default y
- prompt "false"
+ prompt "echo"
+ help
+ Echo args to console
-config CMD_MENU
- tristate
- depends on MENU
- prompt "menu"
+ Usage: echo [-neao] STRING
-config CMD_MENU_MANAGEMENT
- bool
- depends on CMD_MENU
- prompt "menu scripts management"
+ Display a line of TEXT on the console.
-config CMD_MENUTREE
+ Options:
+ -n do not output the trailing newline
+ -a FILE append to FILE instead of using stdout
+ -o FILE overwrite FILE instead of using stdout
+
+config CMD_ECHO_E
bool
- depends on MENU
- select MENUTREE
- prompt "menutree"
+ depends on CMD_ECHO
+ select PROCESS_ESCAPE_SEQUENCE
+ prompt "support -e option to echo"
help
- The menutree command allows to create a menu from a directory
structure
+ Adds this command line option:
+ -e recognize escape sequences
+
+config CMD_EDIT
+ tristate
+ prompt "edit"
+ help
+ A small fill-screen editor.
+
+ Usage: edit FILE
+
+ Use cursor keys, Ctrl-C to exit and Ctrl-D to exit-with-save.
config CMD_LOGIN
tristate
select PASSWORD
prompt "login"
+ help
+ Ask for a password
-config CMD_PASSWD
- tristate
- select CMD_LOGIN
- prompt "passwd"
+ Usage: login [-t TIMEOUT] COMMAND
-if CMD_LOGIN || CMD_PASSWD
+ Asks for a password from the console before script execution
continues.
+ The password can be set with the 'passwd' command. Instead of
specifying
+ a TIMEOUT the magic variable 'global.login.timeout' could be set.
-choice
- prompt "passwd mode"
+ Options:
+ -t TIMEOUT Execute COMMAND if no login withing TIMEOUT
seconds
-config PASSWD_MODE_HIDE
- bool "Hide"
+config CMD_MENU
+ tristate
+ depends on MENU
+ prompt "menu"
+ help
+ Create and display menus
-config PASSWD_MODE_STAR
- bool "Star"
+ Manage Menu:
+ -m menu
+ -l list
+ -s show
-config PASSWD_MODE_CLEAR
- bool "Clear"
+ Show menu:
+ (-A auto select delay)
+ (-d auto select description)
+ menu -s -m MENU [-A delay] [-d auto_display]
-endchoice
+ List menu:
+ menu -l
-endif
+ Menu example:
+ menu -s -m boot
-config CMD_TIME
- bool "time"
+config CMD_MENU_MANAGEMENT
+ bool
+ depends on CMD_MENU
+ prompt "menu scripts management"
help
- Just like the unix time command this command allows to measure the
- execution time of a command. Note: barebox does not use interrupts,
- so the system timer can overrun during the execution of the command
- resulting in incorrect results. The timer gets updated in the function
- checking for ctrl-c, so the time command can be used with commands
- which are interruptible with ctrl-c.
+ Adds this options:
+ -e menu entry
+ -a add
+ -r remove
+ -S select
-config CMD_LINUX_EXEC
- bool "linux exec"
- depends on LINUX
- help
- This command executes a command on the Linux host.
+ Add a menu:
+ menu -a -m NAME -d DESC
-config CMD_GLOBAL
- select GLOBALVAR
- tristate
- prompt "global"
- help
- The global command allows to create global variables
+ Remove a menu:
+ menu -r -m NAME
-endmenu
+ Add an entry:
+ (-R for do no exit the menu after executing the command)
+ (-b for box style 1 for selected)
+ (and optional -c for the command to run when we change the state)
+ menu -e -a -m MENU -c COMMAND [-R] [-b 0|1] -d DESC
-menu "file commands"
+ Add a submenu entry:
+ (-R is not needed)
+ (-b for box style 1 for selected)
+ (and -c is not needed)
+ menu -e -a -m MENU -u submenu -d [-b 0|1] DESC
-config CMD_LS
- tristate
- default y
- prompt "ls"
+ Remove an entry:
+ menu -e -r -m NAME -n ENTRY
-config CMD_RM
- tristate
- default y
- prompt "rm"
+ Select an entry:
+ menu -m <menu> -S -n ENTRY
-config CMD_CAT
- tristate
- default y
- prompt "cat"
+ List menu:
+ menu -e -l [menu]
-config CMD_MKDIR
- tristate
- default y
- prompt "mkdir"
+ Menu examples:
+ menu -a -m boot -d "Boot Menu"
+ menu -e -a -m boot -c boot -d "Boot"
+ menu -e -a -m boot -c reset -d "Reset"
-config CMD_RMDIR
- tristate
- default y
- prompt "rmdir"
-config CMD_CP
- tristate
- default y
- prompt "cp"
+config CMD_MENUTREE
+ bool
+ depends on MENU
+ select MENUTREE
+ prompt "menutree"
+ help
+ Create menu from directory structure
-config CMD_PWD
- tristate
- default y
- prompt "pwd"
+ Usage: menutree [-m] DIR
-config CMD_CD
- tristate
- default y
- prompt "cd"
+ Each menu entry is described by a subdirectory. Each subdirectory
+ can contain the following files which further describe the entry:
-config CMD_MOUNT
- tristate
- default y
- prompt "mount"
+ title A file containing the title of the entry as shown in the menu
+ box If present, the entry is a 'bool' entry. The file contains a
+ name from which the current state of the bool is taken from
and saved
+ to.
+ action if present this file contains a shell script which is executed
when
+ when the entry is selected.
-config CMD_UMOUNT
- tristate
- default y
- prompt "umount"
+ If neither 'box' or 'action' are present, this entry is considered a
submenu
+ containing more entries.
-config CMD_NAND
- tristate
- default y
- depends on NAND
- prompt "nand"
+ Options:
+ -m DIR directory where the menu starts (Default:
/env/menu)
-config CMD_AUTOMOUNT
+config CMD_PASSWD
tristate
- select FS_AUTOMOUNT
- prompt "automount"
+ select CMD_LOGIN
+ prompt "passwd"
help
- automount allows it to automatically execute a script when a certain
- directory is accessed for the first time. The script should then make
- this directory available (discover USB devices, bring network
interface
- up and finally mount the filesystem).
+ Set password
+
+ 'Interactively asks for a password. The digest of this password will
be
+ stored in /env/etc//passwd. This is then used by the 'login' command.
+
+ Entering an empty string will disable the password function.
+
+if CMD_LOGIN || CMD_PASSWD
+
+choice
+ prompt "passwd mode"
+
+config PASSWD_MODE_HIDE
+ bool "Hide"
+
+config PASSWD_MODE_STAR
+ bool "Star"
+
+config PASSWD_MODE_CLEAR
+ bool "Clear"
-config CMD_BASENAME
- tristate
- prompt "basename"
- help
- Strip directory and suffix from filenames and store the result in a
- environment variable
+endchoice
-config CMD_DIRNAME
- tristate
- prompt "dirname"
+endif
+config CMD_SPLASH
+ bool
+ select IMAGE_RENDERER
+ prompt "splash"
help
- Strip last component of file name and store the result in a
- environment variable
+ Display a BMP image on a framebuffer device
-config CMD_LN
- tristate
- prompt "ln"
+ Usage: splash [-fxyno] FILE
-config CMD_READLINK
- tristate
- prompt "readlink"
- help
- read value of a symbolic link
+ This command displays a graphics in the bitmap (.bmp) format on the
+ framebuffer. Currently images with 8 and 24 bit color depth are
supported.
-config CMD_TFTP
- depends on FS_TFTP
- tristate
- prompt "tftp"
- help
- barebox can mount tftp as a filesystem. This command is only needed to
- preserve backward compatibility to the old tftp command.
+ Options:
+ -f FB framebuffer device (default /dev/fb0)
+ -x XOFFS x offset (default center)
+ -y YOFFS y offset (default center)
+ -b COLOR background color in 0xttrrggbb
+ -o render offscreen
-config CMD_FILETYPE
+config CMD_READLINE
tristate
- select FILETYPE
- prompt "filetype"
+ prompt "Readline"
+ help
+ rompt for user input
-endmenu
+ Usage: readline PROMPT VAR
-menu "console"
+ First it displays the PROMPT, then it reads a line of user input into
+ variable VAR.
-config CMD_CLEAR
+config CMD_TIMEOUT
tristate
- default y
- prompt "clear"
+ prompt "timeout"
+ help
+ Usage: timeout [-acrs] SECONDS
-config CMD_ECHO
- tristate
- default y
- prompt "echo"
+ Wait SECONDS for a timeout. Return 1 if the user intervented.
-config CMD_ECHO_E
- bool
- depends on CMD_ECHO
- select PROCESS_ESCAPE_SEQUENCE
- prompt "support -e option to echo"
+ Options:
+ -a interrupt on any key
+ -c interrupt on Ctrl-C
+ -r interrupt on RETURN
+ -s silent mode
+# end Console interaction commands
endmenu
-menu "memory"
-config CMD_LOADB
- depends on !CONSOLE_NONE
- select CRC16
- tristate
- prompt "loadb"
-config CMD_LOADY
- select CRC16
- select XYMODEM
- depends on !CONSOLE_NONE
- tristate
- prompt "loady"
-config CMD_LOADS
- depends on !CONSOLE_NONE
- tristate
- prompt "loads"
+menu "Memory"
-config CMD_SAVES
- tristate
- depends on CMD_LOADS
- prompt "saves"
+config CMD_MEMORY
+ bool
+ default y
+ help
+ TODO This is actually not a command, but turns in the /dev/mem device
+ and common memory options (e.g. range parsing).
-config CMD_MEMINFO
+config CMD_CRC
tristate
- prompt "meminfo"
+ select CRC32
+ prompt "crc32"
+ help
+ Usage: crc32 [-fFvV] AREA
-config CMD_IOMEM
+ Calculate a CRC32 checksum of a memory area.
+ Options:
+ -f FILE Use file instead of memory.
+ -F FILE Use file to compare.
+ -v CRC Verify
+
+config CMD_CRC_CMP
tristate
- prompt "iomem/ioport"
+ depends on CMD_CRC
+ prompt "compare 2 files using crc32"
help
- Show information about iomem/ioport usage. Pendant to
- 'cat /proc/iomem' and 'cat /proc/ioports' under Linux.
+ Adds this option:
-config CMD_MEMORY
- bool
- default y
+ -V FILE Verify with CRC read from FILE
config CMD_MD
tristate
@@ -324,23 +1231,23 @@ config CMD_MD
select CMD_MEMORY
prompt "md"
help
- the md command allows to display (hexdump) memory locations and files.
+ Memory display
-config CMD_MW
- tristate
- default y
- select CMD_MEMORY
- prompt "mw"
- help
- the mw command allows to write to memory locations and files.
+ Usage: md [-bwlsx] REGION
-config CMD_MM
- tristate
- select CMD_MEMORY
- prompt "memory modify (mm)"
- help
- the mm command allows to read-modify-write registers by doing:
- reg = (reg & ~mask) | (val & mask)
+ Display (hex dump) a memory region.
+
+ Options:
+ -b byte access
+ -w word access (16 bit)
+ -l long access (32 bit)
+ -s FILE display file (default /dev/mem)
+ -x swap bytes at output
+
+ Memory regions can be specified in two different forms: START+SIZE
+ or START-END, If START is omitted it defaults to 0x100
+ Sizes can be specified as decimal, or if prefixed with 0x as
hexadecimal.
+ An optional suffix of k, M or G is for kbytes, Megabytes or Gigabytes.
config CMD_MEMCMP
tristate
@@ -348,7 +1255,21 @@ config CMD_MEMCMP
select CMD_MEMORY
prompt "memcmp"
help
- the memcmp command allows to compare memory and file regions.
+ Memory compare
+
+ Usage: memcmp [-bwlsd] ADDR1 ADDR2 COUNT
+
+ Compare memory regions specified with ADDR and ADDR2
+ of size COUNT bytes. If source is a file COUNT can
+ be left unspecified, in which case the whole file is
+ compared.
+
+ Options:
+ -b byte access
+ -w word access (16 bit)
+ -l long access (32 bit)
+ -s FILE source file (default /dev/mem)
+ -d FILE destination file (default /dev/mem)
config CMD_MEMCPY
tristate
@@ -356,7 +1277,18 @@ config CMD_MEMCPY
select CMD_MEMORY
prompt "memcpy"
help
- the memcpy command allows to copy memory and file regions.
+ Memory copy
+
+ Usage: memcpy [-bwlsd] SRC DEST COUNT
+
+ Copy memory at SRC of COUNT bytes to DEST
+
+ Options:
+ -b byte access
+ -w word access (16 bit)
+ -l long access (32 bit)
+ -s FILE source file (default /dev/mem)
+ -d FILE write file (default /dev/mem)
config CMD_MEMSET
tristate
@@ -364,383 +1296,306 @@ config CMD_MEMSET
select CMD_MEMORY
prompt "memset"
help
- the memset command allows to set regions of memory and files to
- a specific value.
+ Memory fill
-config CMD_CRC
- tristate
- select CRC32
- prompt "crc32"
+ Usage: memset [-bwld] ADDR COUNT DATA
-config CMD_CRC_CMP
- tristate
- depends on CMD_CRC
- prompt "compare 2 files using crc32"
+ Fills the first COUNT bytes at offset ADDR with byte DATA,
-config CMD_DIGEST
- tristate
- select DIGEST
+ Options:
+ -b byte access
+ -w word access (16 bit)
+ -l long access (32 bit)
+ -d FILE write file (default /dev/mem)
-config CMD_MD5SUM
+config CMD_MEMTEST
tristate
- select CMD_DIGEST
- select MD5
- prompt "md5sum"
+ prompt "memtest"
+ help
+ The memtest command can test the registered barebox memory.
+ During this test barebox memory regions like heap, stack, ...
+ will be skipped. If the tested architecture has MMU with PTE
+ flags support, the memtest is running twice with cache enabled
+ and with cache disabled
-config CMD_SHA1SUM
- tristate
- select CMD_DIGEST
- select SHA1
- prompt "sha1sum"
+ Usage: memtest [-ib]
-config CMD_SHA256SUM
- tristate
- select CMD_DIGEST
- select SHA256
- prompt "sha256sum"
+ Options:
+ -i ITERATIONS perform number of iterations (default 1, 0 is
endless)
+ -b perform only a test on bus lines
-config CMD_SHA224SUM
+config CMD_MM
tristate
- select CMD_DIGEST
- select SHA224
- prompt "sha224sum"
-
-endmenu
+ select CMD_MEMORY
+ prompt "memory modify (mm)"
+ help
+ Memory modify with mask
-menu "flash"
+ Usage: mm [-bwld] ADDR VAL MASK
-config CMD_FLASH
- tristate
- prompt "protect/erase"
+ Set/clear bits specified with MASK in ADDR to VALUE
-config CMD_UBI
- tristate
- default y if MTD_UBI
- depends on MTD_UBI
- prompt "ubimkvol, ubirmvol, ubiattach"
+ Options:
+ -b byte access
+ -w word access (16 bit)
+ -l long access (32 bit)
+ -d FILE write file (default /dev/mem)
-config CMD_UBIFORMAT
+config CMD_MW
tristate
- depends on MTD_UBI
- select LIBMTD
- select LIBSCAN
- select LIBUBIGEN
- prompt "ubiformat"
-
-endmenu
+ default y
+ select CMD_MEMORY
+ prompt "mw"
+ help
+ Memory write
-menu "booting"
+ Usage: mw [-bwld] REGION DATA...
-config CMD_BOOTM
- tristate
- default y
- select BOOTM
- select CRC32
- select UIMAGE
- select UNCOMPRESS
- select FILETYPE
- select GLOBALVAR
- prompt "bootm"
+ Write DATA value(s) to the specified REGION.
-config CMD_BOOTM_SHOW_TYPE
- bool
- depends on CMD_BOOTM
- prompt "show image information"
+ Options:
+ -b byte access
+ -w word access (16 bit)
+ -l long access (32 bit)
+ -d FILE destination file (default /dev/mem)
-config CMD_BOOTM_VERBOSE
- bool
- prompt "bootm verbose support"
- depends on CMD_BOOTM
- help
- support verbose bootm (-v switch)
+#end Memory commands
+endmenu
-config CMD_BOOTM_INITRD
- bool
- prompt "bootm initrd support"
- depends on CMD_BOOTM
- help
- support initrds in bootm
-config CMD_BOOTM_OFTREE
- bool
- depends on CMD_BOOTM
- select OFTREE
- prompt "bootm oftree support"
- help
- say yes here to support passing a flat device tree to the kernel
-config CMD_BOOTM_OFTREE_UIMAGE
- bool
- prompt "support passing oftree uImages"
- depends on CMD_BOOTM_OFTREE
- help
- Support using oftree uImages. Without this only raw oftree
- blobs can be used.
-config CMD_BOOTM_AIMAGE
- bool
- prompt "bootm Android image support"
- depends on CMD_BOOTM && ARM
- help
- Support using Android Images.
+menu "Hardware manipulation"
-config CMD_UIMAGE
- select UIMAGE
+config CMD_CLK
tristate
- prompt "uimage"
+ depends on COMMON_CLK
+ prompt "clk_dump, clk_set_parent, clk_set_rate"
help
- Show information about uImage and also extract and verify uImages.
+ clk_dump - show information about registered clocks
-config CMD_BOOTZ
- tristate
- depends on ARM
- prompt "bootz"
- help
- compile in the 'bootz' command to start zImages
+ Usage: clk_dump [-v]
-config CMD_BOOTU
- tristate
- default y
- depends on ARM
- prompt "bootu"
- help
- compile in the 'bootu' command to start raw (uncompressed)
- Linux images
+ Options:
+ -v verbose
-config FLEXIBLE_BOOTARGS
- bool
- prompt "flexible Linux bootargs generation"
- depends on CMD_GLOBAL
- help
- Select this to get a more flexible bootargs generation. With this
- option the bootargs are concatenated together from global variables
- beginning with 'global.linux.bootargs.' and 'global.linux.mtdparts.'
- This allows for more flexible scripting since with it it's possible
- to replace parts of the bootargs string without reconstructing it
- completely
-config CMD_LINUX16
- tristate
- depends on X86
- default y if X86
- prompt "linux16"
- help
- Compile the linux16 command to be able to boot bzImages
- via real mode.
+ clk_set_parent - set parent of a clock
-config CMD_BOOT
- tristate
- select BOOTM
- prompt "boot"
- help
- Select this for booting based on scripts. unlike the bootm command
which
- can boot a single image this command offers the possibility to boot
with
- scripts (by default placed under /env/boot/). This command iterates
over
- multiple scripts until one succeeds. It supersedes the previous 'boot'
- script.
+ Usage: clk_set_parent CLK PARENT
-config CMD_RESET
- tristate
- prompt "reset"
-config CMD_POWEROFF
- tristate
- depends on HAS_POWEROFF
- prompt "poweroff"
+ clk_set_rate - set a clocks rate
+
+ Usage: clk_set_rate CLK HZ
-config CMD_GO
- tristate
- prompt "go"
+ Set clock CLK to RATE Hz.
-config CMD_OFTREE
+config CMD_DETECT
tristate
- select OFTREE
- prompt "oftree"
+ prompt "detect"
help
- The oftree command has support for dumping devicetrees and, if
- enabled, to probe devices from the devicetree
+ Some devices take longer time to probe, like slow disks or
+ SD/MMC cards. These can defer the actual probe of the client
+ devices until they are needed. Use the 'detect' command on
+ the physical device to trigger probing.
-config CMD_OF_PROPERTY
- tristate
- select OFTREE
- prompt "of_property"
- help
- The of_property command allows setting and deleting of properties in
- the currently loaded devicetree.
+ Usage: detect [-lea] [devices]
-config CMD_OF_NODE
+ Options:
+ -l list detectable devices
+ -e bail out if one device fails to detect
+ -a detect all devices
+
+config CMD_FLASH
tristate
- select OFTREE
- prompt "of_node"
+ prompt "erase, protect and unprotect"
help
- The of_node command allows adding and removing devicetree nodes.
+ erase - erase flash memory
-endmenu
+ Usage: erase DEVICE [AREA]
-menu "testing"
+ Erase the flash memory handled by DEVICE. Which AREA will be erased
+ depends on the device: If the device represents the whole flash
+ memory, the whole memory will be erased. If the device represents a
+ partition on a main flash memory, only this partition part will be
+ erased.
-config CMD_NANDTEST
- tristate
- depends on NAND
- depends on PARTITION
- depends on NAND_ECC_HW || NAND_ECC_SOFT
- select PARTITION_NEED_MTD
- prompt "nandtest"
+ Use 'addpart' and 'delpart' to manage partitions
-config CMD_MEMTEST
- tristate
- prompt "memtest"
- help
- The memtest command can test the registered barebox memory.
- During this test barebox memory regions like heap, stack, ...
- will be skipped. If the tested architecture has MMU with PTE
- flags support, the memtest is running twice with cache enabled
- and with cache disabled
-config CMD_2048
- tristate
- prompt "2048"
- help
- Console version of the game "2048" for GNU/Linux
+ protect - enable flash write protection
-endmenu
+ Usage: protect DEVICE [AREA]
-menu "video command"
+ Protect the flash memory behind the device. It depends on the device
+ given, what area will be protected. If the device represents the whole
+ flash memory, the whole memory will be protected. If the device
+ represents a partition on a main flash memory, only this partition
part
+ will be protected.
-if VIDEO
+ Use 'addpart' and 'delpart' to manage partitions.
-config CMD_SPLASH
+
+ unprotect - disable flash write protection
+
+ Usage: unprotect DEVICE [AREA]
+
+ Unprotect the flash memory behind the device. It depends on the device
+ given, what area will be unprotected. If the device represents the
whole
+ flash memory, the whole memory will be unprotected. If the device
+ represents a partition on a main flash memory, only this partition
part
+ will be unprotected.
+
+config CMD_GPIO
bool
- select IMAGE_RENDERER
- prompt "splash"
+ depends on GENERIC_GPIO
+ prompt "gpio_direction_input, gpio_direction_output, gpio_get_value and
gpio_set_value"
help
- show bmp files on framebuffer devices
+ gpio_direction_input - set direction of a GPIO pin to input
-endif
+ Usage: gpio_direction_input GPIO
-endmenu
-config CMD_BAREBOX_UPDATE
- tristate
- select BAREBOX_UPDATE
- prompt "barebox-update"
+ gpio_direction_output - set direction of a GPIO pin to output
-config CMD_TIMEOUT
- tristate
- prompt "timeout"
+ Usage: gpio_direction_output GPIO
-config CMD_PARTITION
- tristate
- prompt "addpart/delpart"
-config CMD_TEST
- tristate
- depends on SHELL_HUSH
- default y
- prompt "test"
- help
- shell like test function
+ gpio_get_value - return value of a GPIO pin
-config CMD_REGINFO
- depends on HAS_REGINFO
- select REGINFO
- tristate
- prompt "reginfo"
+ Usage: gpio_get_value GPIO
-config CMD_VERSION
- tristate
- default y
- depends on BANNER
- prompt "version"
-config CMD_HELP
- tristate
- default y
- prompt "help"
+ gpio_set_value - set a GPIO's output value
-config CMD_MAGICVAR
- tristate
- prompt "magicvar"
- help
- barebox has some shell variables with special meanings. This
- command shows the available magic variables.
+ Usage: gpio_set_value GPIO VALUE
-config CMD_MAGICVAR_HELP
+config CMD_I2C
bool
- prompt "display description"
- depends on CMD_MAGICVAR
+ depends on I2C
+ prompt "i2c_probe, i2c_read and i2c_write"
help
- Also display a description to the magic variables
+ i2c_probe - probe for an i2c device
-config CMD_DEVINFO
- tristate
- default y
- prompt "devinfo"
+ Usage: i2c_probe BUS START END
-config CMD_INSMOD
- bool
- depends on MODULES
- default y
- prompt "insmod"
+ Probe the i2c bus BUS, address range from START to END for devices.
-config CMD_LSMOD
- bool
- depends on MODULES
- prompt "lsmod"
-config CMD_GPIO
+ i2c_read - read from an i2c device
+
+ Usage: i2c_read [-bacrwv] DATA...
+
+ Options:
+ -b BUS i2c bus number (default 0)
+ -a ADDR i2c device address
+ -r START start register
+ -w use word (16 bit) wide access
+ -c COUNT byte count
+ -v verbose
+
+
+ i2c_write - write to an i2c device
+
+ Usage: i2c_write [-barwv] DATA...
+
+ Options:
+ -b BUS i2c bus number (default 0)
+ -a ADDR i2c device address
+ -r START start register
+ -w use word (16 bit) wide access
+ -v verbose
+
+config CMD_LED
bool
- depends on GENERIC_GPIO
- prompt "gpio commands"
+ depends on LED
+ prompt "led command"
help
- include gpio_set_value, gpio_get_value, gpio_direction_input and
- gpio_direction_output commands to control gpios.
+ Control LEDs
-config CMD_REGULATOR
- bool
- depends on REGULATOR
- prompt "regulator command"
+ Usage: led LED VALUE
+
+ Control the value of a LED. The exact meaning of VALUE is unspecified,
+ it can be a brightness, or a color. Most often a value of '1' means on
+ and '0' means off.
+
+ Without arguments the available LEDs are listed.
+
+config CMD_NAND
+ tristate
+ default y
+ depends on NAND
+ prompt "nand"
help
- the regulator command lists the currently registered regulators and
- their current state.
+ NAND flash handling
-config CMD_UNCOMPRESS
- bool
- select UNCOMPRESS
- prompt "uncompress"
+ Usage: nand [-adb] NANDDEV
+
+ Options:
+ -a register a bad block aware device ontop of a
normal NAND device
+ -d deregister a bad block aware device
+ -b OFFS mark block at OFFSet as bad
+
+config CMD_NANDTEST
+ tristate
+ depends on NAND
+ depends on PARTITION
+ depends on NAND_ECC_HW || NAND_ECC_SOFT
+ select PARTITION_NEED_MTD
+ prompt "nandtest"
help
- Say yes here to get the uncompress command. uncompress handles
- lzo, gzip and bzip2 compressed files depending on the compiled
- in compression libraries
+ NAND flash memory test
-config CMD_I2C
- bool
- depends on I2C
- prompt "i2c commands"
+ Usage: nandtest [-tmsiol] NANDDEVICE
+
+ Options:
+ -t Really do a nandtest on device
+ -m Mark blocks bad if they appear so
+ -s SEED supply random seed
+ -i ITERATIONS nNumber of iterations
+ -o OFFS start offset on flash
+ -l LEN length of flash to test
+
+config CMD_POWEROFF
+ tristate
+ depends on HAS_POWEROFF
+ prompt "poweroff"
help
- include i2c_probe, i2c_read and i2c_write commands to communicate
- on i2c bus.
+ Turn the power off.
config CMD_SPI
bool
depends on SPI
prompt "spi command"
help
+ Write/read from SPI device
-config CMD_LED
- bool
- depends on LED
- prompt "led command"
- help
- include led command to control LEDs
+ Usage: spi [-brcmfwv] DATA...
+
+ Options:
+ -b BUS SPI bus number (default 0)
+ -r COUNT bytes to read
+ -c chip select (default 0)
+ -m MODE SPI mode (default 0)
+ -f HZ max speed frequency, in Hz (default 1 MHz)
+ -w BIT bits per word (default 8)
+ -v verbose
config CMD_LED_TRIGGER
bool
depends on LED_TRIGGERS
prompt "trigger command"
help
- The trigger command allows to control LED triggers from the command
- line.
+ Handle LED triggers
+
+ Usage: trigger [-td] TRIGGER [LED]
+
+ Control a LED trigger. Without options assigned triggers are shown.
+
+ Options:
+ -t set a trigger (needs LED argument)
+ -d disable a trigger
config CMD_USB
bool
@@ -748,56 +1603,155 @@ config CMD_USB
prompt "usb command"
default y
help
- The usb command allows to rescan for USB devices.
+ (re-)detect USB devices
-config CMD_MIITOOL
- tristate
- depends on PHYLIB
- prompt "miitool"
- help
- The miitool command allows to view media-independent interface status.
- The default short output reports the negotiated link speed and
- link status for selected MII. The '-v' option displays more
- detailed MII status information, such as MII capabilities,
- current advertising mode, and link partner capabilities.
+ Usage: usb [-f]
-config CMD_CLK
- tristate
- depends on COMMON_CLK
- prompt "clock manipulation commands"
- help
- Say yes here to get clk_set_rate, clk_set_parent and clk_dump
- commands to manipulate clocks on your system.
+ Scan for USB devices.
-config CMD_DETECT
- tristate
- prompt "detect"
- help
- say yes here to get the 'detect' command. Some devices take longer
- time to probe, like slow disks or SD/MMC cards. These can defer the
- actual probe of the client devices until they are needed. Use the
- 'detect' command on the physical device to trigger probing.
+ Options:
+ -f force rescan
-menuconfig CMD_WD
+config CMD_WD
bool
depends on WATCHDOG
prompt "wd command"
help
- The 'wd' command which allows to start, stop and trigger the onboard
- watchdog.
+ Enable/disable/trigger the watchdog
-if CMD_WD
+ Usage: wd [TIME]
+
+ Enable the watchdog to bark in TIME seconds.
+ When TIME is 0, the watchdog gets disabled,
+ Without a parameter the watchdog will be re-triggered.
config CMD_WD_DEFAULT_TIMOUT
int
default 0
+ depends on CMD_WD
prompt "default timeout"
help
Define the default timeout value in [seconds] if the first call of
'wd' is done without a timeout value (which means the watchdog gets
enabled and re-triggered with the default timeout value).
-endif
+# end Hardware manipulation commands
+endmenu
+
+
+
+menu "Miscelleanous"
+
+config CMD_2048
+ tristate
+ prompt "2048"
+ help
+ Console version of the game "2048" for GNU/Linux
+
+config CMD_BAREBOX_UPDATE
+ tristate
+ select BAREBOX_UPDATE
+ prompt "barebox-update"
+ help
+ Update barebox to persistent media.
+
+ Usage: barebox_update [-ltdyf] [IMAGE]
+
+ Options:
+ -l list registered targets
+ -t TARGET specify data target handler name
+ -d DEVICE write image to DEVICE
+ -y autom. use 'yes' when asking confirmations
+ -f LEVEL set force level
+
+config CMD_LINUX_EXEC
+ bool "linux exec"
+ depends on LINUX
+ help
+ Execute a command on the host
+
+ Usage: linux_exec COMMAND
+
+config CMD_INSMOD
+ bool
+ depends on MODULES
+ default y
+ prompt "insmod"
+ help
+ Load a barebox module.
+
+config CMD_LSMOD
+ bool
+ depends on MODULES
+ prompt "lsmod"
+ help
+ List loaded barebox modules.
+
+config CMD_OF_NODE
+ tristate
+ select OFTREE
+ prompt "of_node"
+ help
+ Create/delete nodes in the device tree
+
+ Usage: of_node [-cd] NODE NAME
+
+ Options:
+ -c create a new node
+ -d delete a node
+
+config CMD_OF_PROPERTY
+ tristate
+ select OFTREE
+ prompt "of_property"
+ help
+ Handle device tree properties
+
+ Usage: of_property [-sd] NODE [PROPERTY] [VALUES]
+
+ Options:
+ -s set property to value
+ -d delete property
+
+ Valid formats for values:
+ <0x00112233 4 05> - an array of cells. cells not beginning with a
digit are
+ interpreted as node pathes and converted to phandles
+ [00 11 22 .. nn] - byte stream
+ If the value does not start with '<' or '[' it is interpreted as
string
+
+config CMD_OFTREE
+ tristate
+ select OFTREE
+ prompt "oftree"
+ help
+ oftree - handle device trees
+
+ Usage: oftree [-lpfdn] [DTB]
+
+ Options:
+ -l Load DTB to internal device tree
+ -p probe devices from stored device tree
+ -f free stored device tree
+ -d dump device tree from DTB or the parsed tree if
no DTB is given
+ -n NODE specify root device NODE to dump for -d
+
+config CMD_TIME
+ bool "time"
+ help
+ time - measure execution duration of a command
+
+ Usage: time COMMAND
+
+ Note: This command depends on COMMAND being interruptible,
+ otherwise the timer may overrun resulting in incorrect results
+
+# end Miscelleanous commands
+endmenu
+
+
+
+
+# end Commands
endmenu
endif
--
1.7.10.4
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
