Add new MVEBU usb controller nodes to CuBox dts overlay to show how it should be included upstream.
Signed-off-by: Sebastian Hesselbarth <[email protected]> --- Cc: [email protected] Cc: Jason Cooper <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Gregory Clement <[email protected]> Cc: Thomas Petazzoni <[email protected]> Cc: Ezequiel Garcia <[email protected]> --- arch/arm/dts/dove-cubox-bb.dts | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm/dts/dove-cubox-bb.dts b/arch/arm/dts/dove-cubox-bb.dts index f7ad55c4e794..65d19c057bab 100644 --- a/arch/arm/dts/dove-cubox-bb.dts +++ b/arch/arm/dts/dove-cubox-bb.dts @@ -15,4 +15,46 @@ barebox,default-trigger = "heartbeat"; }; }; + + mbus { + internal-regs { + usb0: usb@50000 { + compatible = "marvell,mvebu-usb"; + reg = <0x50000 0x400>; + interrupts = <24>; + clocks = <&gate_clk 0>; + usb-phy = <&usb_phy0>; + vbus-supply = <&usb_power>; + dr_mode = "host"; + status = "okay"; + }; + + usb_phy0: phy@50400 { + compatible = "marvell,mvebu-usb-phy-65nm"; + reg = <0x50400 0x100>; + clocks = <&gate_clk 0>; + #phy-cells = <0>; + status = "okay"; + }; + + usb1: usb@51000 { + compatible = "marvell,mvebu-usb"; + reg = <0x51000 0x400>; + interrupts = <25>; + clocks = <&gate_clk 1>; + usb-phy = <&usb_phy1>; + vbus-supply = <&usb_power>; + dr_mode = "host"; + status = "okay"; + }; + + usb_phy1: phy@51400 { + compatible = "marvell,mvebu-usb-phy-65nm"; + reg = <0x51400 0x100>; + clocks = <&gate_clk 1>; + #phy-cells = <0>; + status = "okay"; + }; + }; + }; }; -- 2.0.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
