Yes confirmed Sascha, bag of paper for me for not checking it all.
I renamed AT91_SMC_MODE->AT91_SAM9_SMC_MODE because I introduced
AT91_SAMA5_SMC_MODE and AT91_SMC_MODE was ambiguous.
Thank you and my apologies,
Matteo
Il 31/07/2014 14:39, Sascha Hauer ha scritto:
Hi Matteo,
On Mon, Jul 21, 2014 at 06:13:26PM +0200, Matteo Fortini wrote:
As stated in section 29.19.35 of SAMA5D3 Series Datasheet,
MODE register has offset 0x10 and at offset 0x0C there is
a TIMINGS register.
Signed-off-by: Matteo Fortini <[email protected]>
I had to fix up this patch with:
From 43a67c4260488beefa8fab8181bf342048b083f2 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <[email protected]>
Date: Thu, 31 Jul 2014 14:37:29 +0200
Subject: [PATCH] fixup! sama5d3x: fix HSMC MODE register offset and add
TIMINGS register
---
arch/arm/mach-at91/at91sam926x_lowlevel_init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
b/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
index 985203a..e69e4a8 100644
--- a/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
+++ b/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
@@ -130,7 +130,7 @@ void __bare_init at91sam926x_lowlevel_init(struct
at91sam926x_lowlevel_cfg *cfg)
at91_sys_write(cfg->matrix_csa, cfg->ebi_csa);
/* flash */
- at91_smc_write(cfg->smc_cs, AT91_SMC_MODE, cfg->smc_mode);
+ at91_smc_write(cfg->smc_cs, AT91_SAM9_SMC_MODE, cfg->smc_mode);
at91_smc_write(cfg->smc_cs, AT91_SMC_CYCLE, cfg->smc_cycle);
Otherwise several boards fail with:
arch/arm/mach-at91/at91sam926x_lowlevel_init.c: In function
'at91sam926x_lowlevel_init':
arch/arm/mach-at91/at91sam926x_lowlevel_init.c:133:2: error: 'AT91_SMC_MODE'
undeclared (first use in this function)
arch/arm/mach-at91/at91sam926x_lowlevel_init.c:133:2: note: each undeclared
identifier is reported only once for each function it appears in
scripts/Makefile.build:245: recipe for target
'arch/arm/mach-at91/pbl-at91sam926x_lowlevel_init.o' failed
make[1]: *** [arch/arm/mach-at91/pbl-at91sam926x_lowlevel_init.o] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:769: recipe for target 'arch/arm/mach-at91' failed
make: *** [arch/arm/mach-at91] Error 2
make: *** Waiting for unfinished jobs....
Can you confirm my fix is correct?
Sascha
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
