Avoids a build failure if the config does not include ULPI support.
Signed-off-by: Lucas Stach <[email protected]>
---
arch/arm/boards/phytec-phycard-imx27/pca100.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boards/phytec-phycard-imx27/pca100.c
b/arch/arm/boards/phytec-phycard-imx27/pca100.c
index 895a3a395777..9475bfafcaa7 100644
--- a/arch/arm/boards/phytec-phycard-imx27/pca100.c
+++ b/arch/arm/boards/phytec-phycard-imx27/pca100.c
@@ -41,6 +41,7 @@
#include <mach/iomux-mx27.h>
#include <mach/devices-imx27.h>
+#if defined(CONFIG_USB) && defined(CONFIG_USB_ULPI)
static void pca100_usb_register(void)
{
mdelay(10);
@@ -55,6 +56,9 @@ static void pca100_usb_register(void)
ulpi_setup((void *)(MX27_USB_OTG_BASE_ADDR + 0x570), 1);
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX27_USB_OTG_BASE_ADDR +
0x400, NULL);
}
+#else
+static void pca100_usb_register(void) { };
+#endif
static void pca100_usb_init(void)
{
@@ -131,8 +135,7 @@ static int pca100_devices_init(void)
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
- if (IS_ENABLED(CONFIG_USB))
- pca100_usb_register();
+ pca100_usb_register();
imx_bbu_external_nand_register_handler("nand", "/dev/nand0.boot",
BBU_HANDLER_FLAG_DEFAULT);
--
2.1.3
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
