Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
---
Two boards -- 'guf-santaro' and 'eltec-hipercam' -- were not
converted to use this function because they enable low-level UART
regardless of the value of CONFIG_DEGUG_LL and so converting them to
'setup_uart_ll' would change the behaviour of the image build with
'imx_v7_defconfig'. Should those boards be converted to respect
CONFIG_DEBUG_LL?
Boards 'karo-tx25' and 'tqma53' could be converted but weren't because
I don't have any i.MX25 or i.MX53 based hardware to test on.
arch/arm/boards/embest-riotboard/lowlevel.c | 16 +--------------
arch/arm/boards/freescale-mx51-babbage/lowlevel.c | 24 +---------------------
.../arm/boards/freescale-mx6sx-sabresdb/lowlevel.c | 11 +---------
arch/arm/boards/karo-tx6x/lowlevel.c | 11 +---------
arch/arm/boards/phytec-phycard-imx6/lowlevel.c | 11 +---------
arch/arm/boards/phytec-phyflex-imx6/lowlevel.c | 11 +---------
arch/arm/boards/tqma53/lowlevel.c | 16 +--------------
arch/arm/boards/tqma6x/lowlevel.c | 18 ++--------------
arch/arm/boards/variscite-mx6/lowlevel.c | 11 +---------
9 files changed, 10 insertions(+), 119 deletions(-)
diff --git a/arch/arm/boards/embest-riotboard/lowlevel.c
b/arch/arm/boards/embest-riotboard/lowlevel.c
index fe21b9a..ccd1a97 100644
--- a/arch/arm/boards/embest-riotboard/lowlevel.c
+++ b/arch/arm/boards/embest-riotboard/lowlevel.c
@@ -10,20 +10,6 @@
#include <mach/imx6-mmdc.h>
#include <mach/imx6.h>
-static inline void setup_uart(void)
-{
- /* Enable UART for lowlevel debugging purposes */
- writel(0x00000000, 0x021e8080);
- writel(0x00004027, 0x021e8084);
- writel(0x00000704, 0x021e8088);
- writel(0x00000a81, 0x021e8090);
- writel(0x0000002b, 0x021e809c);
- writel(0x00013880, 0x021e80b0);
- writel(0x0000047f, 0x021e80a4);
- writel(0x0000c34f, 0x021e80a8);
- writel(0x00000001, 0x021e8080);
-}
-
extern char __dtb_imx6s_riotboard_start[];
ENTRY_FUNCTION(start_imx6s_riotboard, r0, r1, r2)
@@ -34,7 +20,7 @@ ENTRY_FUNCTION(start_imx6s_riotboard, r0, r1, r2)
if (IS_ENABLED(CONFIG_DEBUG_LL)) {
writel(0x4, 0x020e016c);
- setup_uart();
+ setup_uart_ll();
putc_ll('a');
}
diff --git a/arch/arm/boards/freescale-mx51-babbage/lowlevel.c
b/arch/arm/boards/freescale-mx51-babbage/lowlevel.c
index 0135cb4..3bb8614 100644
--- a/arch/arm/boards/freescale-mx51-babbage/lowlevel.c
+++ b/arch/arm/boards/freescale-mx51-babbage/lowlevel.c
@@ -6,13 +6,8 @@
#include <asm/barebox-arm-head.h>
#include <asm/barebox-arm.h>
-#ifdef CONFIG_DEBUG_LL
static inline void setup_uart(void)
{
-
- void __iomem *uartbase =
- (void *)IMX_UART_BASE(IMX_DEBUG_SOC,
- CONFIG_DEBUG_IMX_UART_PORT);
void __iomem *iomuxbase = (void *)MX51_IOMUXC_BASE_ADDR;
void __iomem *ccmbase = (void *)MX51_CCM_BASE_ADDR;
@@ -36,27 +31,10 @@ static inline void setup_uart(void)
writel(0x00000000, iomuxbase + 0x022c);
writel(0x000001c5, iomuxbase + 0x061c);
- writel(0x00000000, uartbase + UCR1);
-
- writel(UCR2_IRTS | UCR2_WS | UCR2_TXEN | UCR2_RXEN | UCR2_SRST,
- uartbase + UCR2);
- writel(UCR3_DSR | UCR3_DCD | UCR3_RI | UCR3_ADNIMP | UCR3_RXDMUXSEL,
- uartbase + UCR3);
- writel((0b10 << UFCR_TXTL_SHF) | UFCR_RFDIV1 | (1 << UFCR_RXTL_SHF),
- uartbase + UFCR);
-
- writel(baudrate_to_ubir(115200), uartbase + UBIR);
- writel(refclock_to_ubmr(54000000), uartbase + UBMR);
-
- writel(UCR1_UARTEN, uartbase + UCR1);
+ setup_uart_ll();
putc_ll('>');
}
-#else
-static inline void setup_uart(void)
-{
-}
-#endif /* CONFIG_DEBUG_LL */
extern char __dtb_imx51_babbage_start[];
diff --git a/arch/arm/boards/freescale-mx6sx-sabresdb/lowlevel.c
b/arch/arm/boards/freescale-mx6sx-sabresdb/lowlevel.c
index 4c5a74e..a8d16cb 100644
--- a/arch/arm/boards/freescale-mx6sx-sabresdb/lowlevel.c
+++ b/arch/arm/boards/freescale-mx6sx-sabresdb/lowlevel.c
@@ -22,7 +22,6 @@
static inline void setup_uart(void)
{
void __iomem *ccmbase = (void *)MX6_CCM_BASE_ADDR;
- void __iomem *uartbase = (void *)MX6_UART1_BASE_ADDR;
void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
writel(0xffffffff, ccmbase + 0x68);
@@ -38,15 +37,7 @@ static inline void setup_uart(void)
writel(0x0, iomuxbase + 0x28);
writel(0x1b0b1, iomuxbase + 0x0370);
- writel(0x00000000, uartbase + 0x80);
- writel(0x00004027, uartbase + 0x84);
- writel(0x00000784, uartbase + 0x88);
- writel(0x00000a81, uartbase + 0x90);
- writel(0x0000002b, uartbase + 0x9c);
- writel(0x0001b0b0, uartbase + 0xb0);
- writel(0x0000047f, uartbase + 0xa4);
- writel(0x0000c34f, uartbase + 0xa8);
- writel(0x00000001, uartbase + 0x80);
+ setup_uart_ll();
putc_ll('>');
}
diff --git a/arch/arm/boards/karo-tx6x/lowlevel.c
b/arch/arm/boards/karo-tx6x/lowlevel.c
index cd4be5e..3f9fb23 100644
--- a/arch/arm/boards/karo-tx6x/lowlevel.c
+++ b/arch/arm/boards/karo-tx6x/lowlevel.c
@@ -23,7 +23,6 @@
static inline void setup_uart(void)
{
void __iomem *ccmbase = (void *)MX6_CCM_BASE_ADDR;
- void __iomem *uartbase = (void *)MX6_UART1_BASE_ADDR;
void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
writel(0x1, iomuxbase + 0x0314);
@@ -39,15 +38,7 @@ static inline void setup_uart(void)
writel(0xffffffff, ccmbase + 0x7c);
writel(0xffffffff, ccmbase + 0x80);
- writel(0x00000000, uartbase + 0x80);
- writel(0x00004027, uartbase + 0x84);
- writel(0x00000784, uartbase + 0x88);
- writel(0x00000a81, uartbase + 0x90);
- writel(0x0000002b, uartbase + 0x9c);
- writel(0x0001b0b0, uartbase + 0xb0);
- writel(0x0000047f, uartbase + 0xa4);
- writel(0x0000c34f, uartbase + 0xa8);
- writel(0x00000001, uartbase + 0x80);
+ setup_uart_ll();
putc_ll('>');
}
diff --git a/arch/arm/boards/phytec-phycard-imx6/lowlevel.c
b/arch/arm/boards/phytec-phycard-imx6/lowlevel.c
index dc10649..1d48818 100644
--- a/arch/arm/boards/phytec-phycard-imx6/lowlevel.c
+++ b/arch/arm/boards/phytec-phycard-imx6/lowlevel.c
@@ -27,7 +27,6 @@
static inline void setup_uart(void)
{
void __iomem *ccmbase = IOMEM(MX6_CCM_BASE_ADDR);
- void __iomem *uartbase = IOMEM(MX6_UART3_BASE_ADDR);
void __iomem *iomuxbase = IOMEM(MX6_IOMUXC_BASE_ADDR);
writel(0x4, iomuxbase + 0x01f8);
@@ -40,15 +39,7 @@ static inline void setup_uart(void)
writel(0xffffffff, ccmbase + 0x7c);
writel(0xffffffff, ccmbase + 0x80);
- writel(0x00000000, uartbase + 0x80);
- writel(0x00004027, uartbase + 0x84);
- writel(0x00000704, uartbase + 0x88);
- writel(0x00000a81, uartbase + 0x90);
- writel(0x0000002b, uartbase + 0x9c);
- writel(0x00013880, uartbase + 0xb0);
- writel(0x0000047f, uartbase + 0xa4);
- writel(0x0000c34f, uartbase + 0xa8);
- writel(0x00000001, uartbase + 0x80);
+ setup_uart_ll();
putc_ll('>');
}
diff --git a/arch/arm/boards/phytec-phyflex-imx6/lowlevel.c
b/arch/arm/boards/phytec-phyflex-imx6/lowlevel.c
index ee6d7fb..367d4dc 100644
--- a/arch/arm/boards/phytec-phyflex-imx6/lowlevel.c
+++ b/arch/arm/boards/phytec-phyflex-imx6/lowlevel.c
@@ -28,7 +28,6 @@
static inline void setup_uart(void)
{
void __iomem *ccmbase = (void *)MX6_CCM_BASE_ADDR;
- void __iomem *uartbase = (void *)MX6_UART4_BASE_ADDR;
void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
writel(0x4, iomuxbase + 0x01f8);
@@ -41,15 +40,7 @@ static inline void setup_uart(void)
writel(0xffffffff, ccmbase + 0x7c);
writel(0xffffffff, ccmbase + 0x80);
- writel(0x00000000, uartbase + 0x80);
- writel(0x00004027, uartbase + 0x84);
- writel(0x00000704, uartbase + 0x88);
- writel(0x00000a81, uartbase + 0x90);
- writel(0x0000002b, uartbase + 0x9c);
- writel(0x00013880, uartbase + 0xb0);
- writel(0x0000047f, uartbase + 0xa4);
- writel(0x0000c34f, uartbase + 0xa8);
- writel(0x00000001, uartbase + 0x80);
+ setup_uart_ll();
putc_ll('>');
}
diff --git a/arch/arm/boards/tqma53/lowlevel.c
b/arch/arm/boards/tqma53/lowlevel.c
index 4e129e4..f3eb1ad 100644
--- a/arch/arm/boards/tqma53/lowlevel.c
+++ b/arch/arm/boards/tqma53/lowlevel.c
@@ -10,26 +10,12 @@
extern char __dtb_imx53_mba53_start[];
-static inline void setup_uart(void __iomem *base)
-{
- /* Enable UART for lowlevel debugging purposes */
- writel(0x00000000, base + 0x80);
- writel(0x00004027, base + 0x84);
- writel(0x00000704, base + 0x88);
- writel(0x00000a81, base + 0x90);
- writel(0x0000002b, base + 0x9c);
- writel(0x0001046a, base + 0xb0);
- writel(0x0000047f, base + 0xa4);
- writel(0x0000a2c1, base + 0xa8);
- writel(0x00000001, base + 0x80);
-}
-
static void __noreturn start_imx53_tqma53_common(void *fdt)
{
if (IS_ENABLED(CONFIG_DEBUG_LL)) {
writel(0x3, MX53_IOMUXC_BASE_ADDR + 0x278);
writel(0x3, MX53_IOMUXC_BASE_ADDR + 0x27c);
- setup_uart((void *)MX53_UART2_BASE_ADDR);
+ setup_uart_ll();
putc_ll('>');
}
diff --git a/arch/arm/boards/tqma6x/lowlevel.c
b/arch/arm/boards/tqma6x/lowlevel.c
index 23f3407..1de60d8 100644
--- a/arch/arm/boards/tqma6x/lowlevel.c
+++ b/arch/arm/boards/tqma6x/lowlevel.c
@@ -24,20 +24,6 @@
#include <mach/imx6-mmdc.h>
#include <mach/imx6.h>
-static inline void setup_uart(void)
-{
- /* Enable UART for lowlevel debugging purposes */
- writel(0x00000000, 0x021e8080);
- writel(0x00004027, 0x021e8084);
- writel(0x00000704, 0x021e8088);
- writel(0x00000a81, 0x021e8090);
- writel(0x0000002b, 0x021e809c);
- writel(0x00013880, 0x021e80b0);
- writel(0x0000047f, 0x021e80a4);
- writel(0x0000c34f, 0x021e80a8);
- writel(0x00000001, 0x021e8080);
-}
-
extern char __dtb_imx6q_mba6x_start[];
extern char __dtb_imx6dl_mba6x_start[];
@@ -51,7 +37,7 @@ ENTRY_FUNCTION(start_imx6q_mba6x, r0, r1, r2)
if (IS_ENABLED(CONFIG_DEBUG_LL)) {
writel(0x2, 0x020e0338);
- setup_uart();
+ setup_uart_ll();
putc_ll('a');
}
@@ -72,7 +58,7 @@ ENTRY_FUNCTION(start_imx6dl_mba6x, r0, r1, r2)
if (IS_ENABLED(CONFIG_DEBUG_LL)) {
writel(0x2, 0x020e035c);
- setup_uart();
+ setup_uart_ll();
putc_ll('a');
}
diff --git a/arch/arm/boards/variscite-mx6/lowlevel.c
b/arch/arm/boards/variscite-mx6/lowlevel.c
index 22e7eae..b0ab424 100644
--- a/arch/arm/boards/variscite-mx6/lowlevel.c
+++ b/arch/arm/boards/variscite-mx6/lowlevel.c
@@ -29,7 +29,6 @@
static inline void setup_uart(void)
{
void __iomem *ccmbase = (void *)MX6_CCM_BASE_ADDR;
- void __iomem *uartbase = (void *)MX6_UART1_BASE_ADDR;
void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
writel(0x03, iomuxbase + 0x0280);
@@ -43,15 +42,7 @@ static inline void setup_uart(void)
writel(0xffffffff, ccmbase + 0x7c);
writel(0xffffffff, ccmbase + 0x80);
- writel(0x00000000, uartbase + 0x80);
- writel(0x00004027, uartbase + 0x84);
- writel(0x00000704, uartbase + 0x88);
- writel(0x00000a81, uartbase + 0x90);
- writel(0x0000002b, uartbase + 0x9c);
- writel(0x00013880, uartbase + 0xb0);
- writel(0x0000047f, uartbase + 0xa4);
- writel(0x0000c34f, uartbase + 0xa8);
- writel(0x00000001, uartbase + 0x80);
+ setup_uart_ll();
putc_ll('>');
}
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
