From: Steffen Trumtrar <[email protected]> This enabled multi image support for the Garz&Fricke Vincell board. Also it adds the Vincell-LT as a second image with a separate device tree. Previously we used the same image on both the Vincell and the Vincell-LT image since the differences are not that significant for barebox. Still this was good for quite some confusion internally, so let's properly introduce a second image.
Signed-off-by: Steffen Trumtrar <[email protected]> Signed-off-by: Sascha Hauer <[email protected]> --- Documentation/boards/imx/Garz-Fricke-Vincell.rst | 43 ++ arch/arm/boards/guf-vincell/board.c | 281 +-------- arch/arm/boards/guf-vincell/env/boot/nand-ubi | 5 - arch/arm/boards/guf-vincell/env/init/mtdparts-nand | 11 - arch/arm/boards/guf-vincell/env/nv/hostname | 1 - arch/arm/boards/guf-vincell/lowlevel.c | 54 +- arch/arm/configs/vincell_defconfig | 123 ++-- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx53-guf-vincell-lt.dts | 679 +++++++++++++++++++++ arch/arm/dts/imx53-guf-vincell.dts | 402 ++++++++++++ arch/arm/mach-imx/Kconfig | 10 +- images/Makefile.imx | 10 + 12 files changed, 1261 insertions(+), 359 deletions(-) create mode 100644 Documentation/boards/imx/Garz-Fricke-Vincell.rst delete mode 100644 arch/arm/boards/guf-vincell/env/boot/nand-ubi delete mode 100644 arch/arm/boards/guf-vincell/env/init/mtdparts-nand delete mode 100644 arch/arm/boards/guf-vincell/env/nv/hostname create mode 100644 arch/arm/dts/imx53-guf-vincell-lt.dts create mode 100644 arch/arm/dts/imx53-guf-vincell.dts diff --git a/Documentation/boards/imx/Garz-Fricke-Vincell.rst b/Documentation/boards/imx/Garz-Fricke-Vincell.rst new file mode 100644 index 0000000..2eb5f65 --- /dev/null +++ b/Documentation/boards/imx/Garz-Fricke-Vincell.rst @@ -0,0 +1,43 @@ +Garz+Fricke Vincell LT +====================== + +This CPU card is based on a Freescale i.MX53 CPU. The card is shipped with: + + * 512MiB NAND flash + * 512MiB synchronous dynamic RAM + * microSD slot + +see http://www.garz-fricke.com/vincell-lt-core_de.html for more information + + +Bootstrapping barebox +===================== + +The Vincell is shipped with the RedBoot bootloader. To replace RedBoot with +barebox, you first need to connect a serial console to the device. + +UART1 is located on the Molex header X39. When the Vincell is lying on the +display, then Pin 1 on the header is in the lower right: + + * Pin 1 - GND + * Pin 2 - TXD1 + * Pin 3 - RXD1 + +If everything is connected right, RedBoot shows up on the console. + +factory_bootstrap +----------------- + +Turn on the board and abort the boot process with ``Ctrl-C``. +Configure RedBoot so that it finds the barebox image on your TFTP server. +Execute ``fc`` and change the network setup according to your environment. +Be sure to copy the `Boot script` line to the prompt, otherwise it will be +set empty. The network setup can be validated with ``ping -h <serverip>``. +If the network setup is working properly, barebox can be loaded into memory:: + + load -v -r -b 0x80100000 barebox-guf-vincell-lt.img + exec + +Once in barebox, the bootloader can now be persisted to NAND:: + + barebox_update -t nand /mnt/tftp/barebox-guf-vincell-lt.img`` diff --git a/arch/arm/boards/guf-vincell/board.c b/arch/arm/boards/guf-vincell/board.c index ded7a37..a164c93 100644 --- a/arch/arm/boards/guf-vincell/board.c +++ b/arch/arm/boards/guf-vincell/board.c @@ -16,235 +16,18 @@ #include <common.h> #include <environment.h> -#include <fcntl.h> -#include <fec.h> -#include <fs.h> #include <init.h> -#include <nand.h> -#include <net.h> -#include <partition.h> #include <linux/sizes.h> #include <bbu.h> #include <gpio.h> #include <io.h> -#include <i2c/i2c.h> #include <linux/clk.h> -#include <usb/fsl_usb2.h> -#include <generated/mach-types.h> - -#include <mach/imx53-regs.h> -#include <mach/iomux-mx53.h> #include <mach/devices-imx53.h> #include <mach/generic.h> -#include <mach/imx-nand.h> #include <mach/iim.h> -#include <mach/imx-nand.h> #include <mach/bbu.h> -#include <mach/imx-flash-header.h> #include <mach/imx5.h> -#include <mach/usb.h> - -#include <asm/armlinux.h> -#include <asm/mmu.h> - -static struct fec_platform_data fec_info = { - .xcv_type = PHY_INTERFACE_MODE_RMII, -}; - -static iomux_v3_cfg_t vincell_pads[] = { - MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD, - MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC, - MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD, - MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS, - MX53_PAD_GPIO_8__CAN1_RXCAN, - MX53_PAD_GPIO_7__CAN1_TXCAN, - MX53_PAD_KEY_ROW4__CAN2_RXCAN, - MX53_PAD_KEY_COL4__CAN2_TXCAN, - MX53_PAD_GPIO_3__CCM_CLKO2, - MX53_PAD_KEY_COL1__ECSPI1_MISO, - MX53_PAD_KEY_ROW0__ECSPI1_MOSI, - MX53_PAD_GPIO_19__ECSPI1_RDY, - MX53_PAD_KEY_COL0__ECSPI1_SCLK, - MX53_PAD_KEY_ROW1__GPIO4_9, /* ECSPI1_SS0 */ - MX53_PAD_KEY_COL2__GPIO4_10, /* ECSPI1_SS1 */ - MX53_PAD_KEY_ROW2__GPIO4_11, /* ECSPI1_SS2 */ - MX53_PAD_KEY_COL3__GPIO4_12, /* ECSPI1_SS3 */ - MX53_PAD_CSI0_DAT10__ECSPI2_MISO, - MX53_PAD_EIM_CS1__ECSPI2_MOSI, - MX53_PAD_EIM_A25__ECSPI2_RDY, - MX53_PAD_DISP0_DAT19__ECSPI2_SCLK, - MX53_PAD_DISP0_DAT18__GPIO5_12, /* ECSPI2_SS0 */ - MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, - MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, - MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, - MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, - MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, - MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, - MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, - MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7, - MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8, - MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9, - MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10, - MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11, - MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12, - MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13, - MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14, - MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15, - MX53_PAD_NANDF_ALE__EMI_NANDF_ALE, - MX53_PAD_NANDF_CLE__EMI_NANDF_CLE, - MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0, - MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1, - MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2, - MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3, - MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0, - MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B, - MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B, - MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B, - MX53_PAD_EIM_A16__EMI_WEIM_A_16, - MX53_PAD_EIM_A17__EMI_WEIM_A_17, - MX53_PAD_EIM_A18__EMI_WEIM_A_18, - MX53_PAD_EIM_A19__EMI_WEIM_A_19, - MX53_PAD_EIM_A20__EMI_WEIM_A_20, - MX53_PAD_EIM_CS0__EMI_WEIM_CS_0, - MX53_PAD_EIM_D16__EMI_WEIM_D_16, - MX53_PAD_EIM_D17__EMI_WEIM_D_17, - MX53_PAD_EIM_D18__EMI_WEIM_D_18, - MX53_PAD_EIM_D19__EMI_WEIM_D_19, - MX53_PAD_EIM_D20__EMI_WEIM_D_20, - MX53_PAD_EIM_D21__EMI_WEIM_D_21, - MX53_PAD_EIM_D22__EMI_WEIM_D_22, - MX53_PAD_EIM_D23__EMI_WEIM_D_23, - MX53_PAD_EIM_D24__EMI_WEIM_D_24, - MX53_PAD_EIM_D25__EMI_WEIM_D_25, - MX53_PAD_EIM_D26__EMI_WEIM_D_26, - MX53_PAD_EIM_D27__EMI_WEIM_D_27, - MX53_PAD_EIM_D28__EMI_WEIM_D_28, - MX53_PAD_EIM_D29__EMI_WEIM_D_29, - MX53_PAD_EIM_D30__EMI_WEIM_D_30, - MX53_PAD_EIM_D31__EMI_WEIM_D_31, - MX53_PAD_EIM_EB0__EMI_WEIM_EB_0, - MX53_PAD_EIM_EB1__EMI_WEIM_EB_1, - MX53_PAD_EIM_OE__EMI_WEIM_OE, - MX53_PAD_EIM_RW__EMI_WEIM_RW, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - MX53_PAD_DI0_PIN4__ESDHC1_WP, - MX53_PAD_FEC_MDC__FEC_MDC, - MX53_PAD_FEC_MDIO__FEC_MDIO, - MX53_PAD_FEC_RXD0__FEC_RDATA_0, - MX53_PAD_FEC_RXD1__FEC_RDATA_1, - MX53_PAD_FEC_CRS_DV__FEC_RX_DV, - MX53_PAD_FEC_RX_ER__FEC_RX_ER, - MX53_PAD_FEC_TXD0__FEC_TDATA_0, - MX53_PAD_FEC_TXD1__FEC_TDATA_1, - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, - MX53_PAD_FEC_TX_EN__FEC_TX_EN, - MX53_PAD_SD2_CLK__GPIO1_10, - MX53_PAD_SD2_DATA3__GPIO1_12, - MX53_PAD_GPIO_2__GPIO1_2, - MX53_PAD_GPIO_4__GPIO1_4, - MX53_PAD_PATA_DATA0__GPIO2_0, - MX53_PAD_PATA_DATA1__GPIO2_1, - MX53_PAD_PATA_DATA10__GPIO2_10, - MX53_PAD_PATA_DATA11__GPIO2_11, - MX53_PAD_PATA_DATA13__GPIO2_13, - MX53_PAD_PATA_DATA14__GPIO2_14, - MX53_PAD_PATA_DATA15__GPIO2_15, - MX53_PAD_PATA_DATA2__GPIO2_2, - MX53_PAD_PATA_DATA3__GPIO2_3, - MX53_PAD_EIM_EB2__GPIO2_30, - MX53_PAD_PATA_DATA4__PATA_DATA_4, - MX53_PAD_PATA_DATA5__GPIO2_5, - MX53_PAD_PATA_DATA6__GPIO2_6, - MX53_PAD_PATA_DATA7__GPIO2_7, - MX53_PAD_PATA_DATA8__GPIO2_8, - MX53_PAD_PATA_DATA9__GPIO2_9, - MX53_PAD_GPIO_10__GPIO4_0, - MX53_PAD_GPIO_11__GPIO4_1, - MX53_PAD_GPIO_12__GPIO4_2, - MX53_PAD_DISP0_DAT8__GPIO4_29, - MX53_PAD_GPIO_13__GPIO4_3, - MX53_PAD_DISP0_DAT16__GPIO5_10, - MX53_PAD_DISP0_DAT17__GPIO5_11, - MX53_PAD_CSI0_PIXCLK__GPIO5_18, - MX53_PAD_CSI0_MCLK__GPIO5_19, - MX53_PAD_CSI0_DATA_EN__GPIO5_20, - MX53_PAD_CSI0_VSYNC__GPIO5_21, - MX53_PAD_CSI0_DAT4__GPIO5_22, - MX53_PAD_CSI0_DAT5__GPIO5_23, - MX53_PAD_CSI0_DAT6__GPIO5_24, - MX53_PAD_DISP0_DAT14__GPIO5_8, - MX53_PAD_DISP0_DAT15__GPIO5_9, - MX53_PAD_PATA_DIOW__GPIO6_17, - MX53_PAD_PATA_DMACK__GPIO6_18, - MX53_PAD_GPIO_17__GPIO7_12, - MX53_PAD_GPIO_18__GPIO7_13, - MX53_PAD_PATA_RESET_B__GPIO7_4, - MX53_PAD_PATA_IORDY__GPIO7_5, - MX53_PAD_PATA_DA_0__GPIO7_6, - MX53_PAD_PATA_DA_2__GPIO7_8, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_KEY_COL3__I2C2_SCL, - MX53_PAD_KEY_ROW3__I2C2_SDA, - MX53_PAD_GPIO_5__I2C3_SCL, - MX53_PAD_GPIO_6__I2C3_SDA, - MX53_PAD_KEY_COL0__KPP_COL_0, - MX53_PAD_KEY_COL1__KPP_COL_1, - MX53_PAD_KEY_COL2__KPP_COL_2, - MX53_PAD_KEY_COL3__KPP_COL_3, - MX53_PAD_GPIO_19__KPP_COL_5, - MX53_PAD_GPIO_9__KPP_COL_6, - MX53_PAD_SD2_DATA1__KPP_COL_7, - MX53_PAD_KEY_ROW0__KPP_ROW_0, - MX53_PAD_KEY_ROW1__KPP_ROW_1, - MX53_PAD_KEY_ROW2__KPP_ROW_2, - MX53_PAD_KEY_ROW3__KPP_ROW_3, - MX53_PAD_SD2_CMD__KPP_ROW_5, - MX53_PAD_SD2_DATA2__KPP_ROW_6, - MX53_PAD_SD2_DATA0__KPP_ROW_7, - MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK, - MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0, - MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1, - MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2, - MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3, - MX53_PAD_DISP0_DAT8__PWM1_PWMO, - MX53_PAD_DISP0_DAT9__PWM2_PWMO, - MX53_PAD_PATA_INTRQ__UART2_CTS, - MX53_PAD_PATA_DIOR__UART2_RTS, - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, - MX53_PAD_PATA_DA_1__UART3_CTS, - MX53_PAD_PATA_CS_1__UART3_RXD_MUX, - MX53_PAD_PATA_CS_0__UART3_TXD_MUX, - MX53_PAD_CSI0_DAT17__UART4_CTS, - MX53_PAD_CSI0_DAT16__UART4_RTS, - MX53_PAD_CSI0_DAT13__UART4_RXD_MUX, - MX53_PAD_CSI0_DAT12__UART4_TXD_MUX, - MX53_PAD_CSI0_DAT19__UART5_CTS, - MX53_PAD_CSI0_DAT18__UART5_RTS, - MX53_PAD_CSI0_DAT15__UART5_RXD_MUX, - MX53_PAD_CSI0_DAT14__UART5_TXD_MUX, - MX53_PAD_GPIO_0__USBOH3_USBH1_PWR, - MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK, - MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0, - MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1, - MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2, - MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3, - MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4, - MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5, - MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6, - MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7, - MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR, - MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT, - MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP, - MX53_PAD_GPIO_1__WDOG2_WDOG_B, -}; #define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) @@ -255,77 +38,19 @@ static void vincell_fec_reset(void) gpio_set_value(LOCO_FEC_PHY_RST, 1); } -static struct imx_nand_platform_data nand_info = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static struct i2c_board_info i2c_devices[] = { - { - I2C_BOARD_INFO("da9053", 0x48), - }, -}; - -static struct fsl_usb2_platform_data usb_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, -}; - static int vincell_devices_init(void) { writel(0, MX53_M4IF_BASE_ADDR + 0xc); - console_flush(); - imx53_init_lowlevel(1000); - clk_set_rate(clk_lookup("nfc_podf"), 66666667); - - imx53_add_nand(&nand_info); - imx51_iim_register_fec_ethaddr(); - imx53_add_fec(&fec_info); - imx53_add_mmc0(NULL); - i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices)); - imx53_add_i2c0(NULL); - - add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, MX53_OTG_BASE_ADDR, 0x200, - IORESOURCE_MEM, &usb_pdata); + clk_set_rate(clk_lookup("emi_slow_podf"), 133333334); + clk_set_rate(clk_lookup("nfc_podf"), 33333334); vincell_fec_reset(); - armlinux_set_architecture(3297); - - devfs_add_partition("nand0", SZ_1M, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw"); - dev_add_bb_dev("self_raw", "self0"); - devfs_add_partition("nand0", SZ_1M + SZ_512K, SZ_512K, DEVFS_PARTITION_FIXED, "env_raw"); - dev_add_bb_dev("env_raw", "env0"); - imx53_bbu_internal_nand_register_handler("nand", - BBU_HANDLER_FLAG_DEFAULT, 3 * SZ_128K); + BBU_HANDLER_FLAG_DEFAULT, SZ_512K); return 0; } device_initcall(vincell_devices_init); - -static int vincell_part_init(void) -{ - devfs_add_partition("disk0", 0x00000, 0x80000, DEVFS_PARTITION_FIXED, "self0"); - devfs_add_partition("disk0", 0x80000, 0x80000, DEVFS_PARTITION_FIXED, "env0"); - - return 0; -} -late_initcall(vincell_part_init); - -static int vincell_console_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(vincell_pads, ARRAY_SIZE(vincell_pads)); - - barebox_set_model("Garz & Fricke VINCELL"); - barebox_set_hostname("vincell"); - - imx53_add_uart1(); - - return 0; -} - -console_initcall(vincell_console_init); diff --git a/arch/arm/boards/guf-vincell/env/boot/nand-ubi b/arch/arm/boards/guf-vincell/env/boot/nand-ubi deleted file mode 100644 index 510ac11..0000000 --- a/arch/arm/boards/guf-vincell/env/boot/nand-ubi +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/sh - -global.bootm.image="/dev/nand0.kernel.bb" -#global.bootm.oftree="/env/oftree" -bootargs-root-ubi -r root -m nand0.root diff --git a/arch/arm/boards/guf-vincell/env/init/mtdparts-nand b/arch/arm/boards/guf-vincell/env/init/mtdparts-nand deleted file mode 100644 index 4fffefc..0000000 --- a/arch/arm/boards/guf-vincell/env/init/mtdparts-nand +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh - -if [ "$1" = menu ]; then - init-menu-add-entry "$0" "NAND partitions" - exit -fi - -mtdparts="512k(nand0.barebox)ro,512k(nand0.bareboxenv),4M(nand0.kernel),-(nand0.root)" -kernelname="mxc_nand" - -mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts} diff --git a/arch/arm/boards/guf-vincell/env/nv/hostname b/arch/arm/boards/guf-vincell/env/nv/hostname deleted file mode 100644 index 922106e..0000000 --- a/arch/arm/boards/guf-vincell/env/nv/hostname +++ /dev/null @@ -1 +0,0 @@ -vincell diff --git a/arch/arm/boards/guf-vincell/lowlevel.c b/arch/arm/boards/guf-vincell/lowlevel.c index 629529d..a72eaf8 100644 --- a/arch/arm/boards/guf-vincell/lowlevel.c +++ b/arch/arm/boards/guf-vincell/lowlevel.c @@ -1,7 +1,9 @@ #include <common.h> +#include <debug_ll.h> #include <io.h> #include <init.h> #include <mach/imx53-regs.h> +#include <mach/clock-imx51_53.h> #include <mach/imx5.h> #include <mach/iomux-v3.h> #include <mach/esdctl-v4.h> @@ -9,7 +11,6 @@ #include <mach/generic.h> #include <asm/barebox-arm.h> #include <asm/barebox-arm-head.h> -#include <io.h> #define IOMUX_PADCTL_DDRI_DDR (1 << 9) @@ -122,31 +123,56 @@ void disable_watchdog(void) writew(0x0, MX53_WDOG2_BASE_ADDR + 8); } -void sdram_init(void); - -void __bare_init __naked barebox_arm_reset_vector(void) +static noinline void imx53_guf_vincell_init(void *fdt) { + void __iomem *ccm = (void *)MX53_CCM_BASE_ADDR; u32 r; imx5_cpu_lowlevel_init(); arm_setup_stack(0xf8020000 - 8); + writel(0x0088494c, ccm + MX5_CCM_CBCDR); + writel(0x02b12f0a, ccm + MX5_CCM_CSCMR2); + imx53_ungate_all_peripherals(); + + imx53_init_lowlevel_early(800); + + if (IS_ENABLED(CONFIG_DEBUG_LL)) { + writel(0x3, MX53_IOMUXC_BASE_ADDR + 0x27c); + writel(0x3, MX53_IOMUXC_BASE_ADDR + 0x278); + imx53_uart_setup_ll(); + putc_ll('>'); + } + /* Skip SDRAM initialization if we run from RAM */ r = get_pc(); - if (r > 0x70000000 && r < 0xf0000000) - imx53_barebox_entry(NULL); + if (!(r > 0x70000000 && r < 0xf0000000)) { + disable_watchdog(); + configure_dram_iomux(); + imx_esdctlv4_init(); + } + + imx53_barebox_entry(fdt); +} + +extern char __dtb_imx53_guf_vincell_lt_start[]; + +ENTRY_FUNCTION(start_imx53_guf_vincell_lt, r0, r1, r2) +{ + void *fdt; - /* Setup a preliminary stack */ - r = 0xf8000000 + 0x60000 - 16; - __asm__ __volatile__("mov sp, %0" : : "r"(r)); + fdt = __dtb_imx53_guf_vincell_lt_start - get_runtime_offset(); - disable_watchdog(); + imx53_guf_vincell_init(fdt); +} - configure_dram_iomux(); +extern char __dtb_imx53_guf_vincell_start[]; - imx5_init_lowlevel(); +ENTRY_FUNCTION(start_imx53_guf_vincell, r0, r1, r2) +{ + void *fdt; - imx_esdctlv4_init(); + fdt = __dtb_imx53_guf_vincell_start - get_runtime_offset(); - imx53_barebox_entry(NULL); + imx53_guf_vincell_init(fdt); } diff --git a/arch/arm/configs/vincell_defconfig b/arch/arm/configs/vincell_defconfig index 11f61ee..7ee553d 100644 --- a/arch/arm/configs/vincell_defconfig +++ b/arch/arm/configs/vincell_defconfig @@ -1,82 +1,117 @@ CONFIG_ARCH_IMX=y -CONFIG_ARCH_IMX53=y +CONFIG_IMX_MULTI_BOARDS=y CONFIG_MACH_GUF_VINCELL=y CONFIG_IMX_IIM=y CONFIG_IMX_IIM_FUSE_BLOW=y CONFIG_THUMB2_BAREBOX=y CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_ARM_UNWIND=y -CONFIG_PBL_IMAGE=y +CONFIG_IMAGE_COMPRESSION_XZKERN=y CONFIG_MMU=y -CONFIG_TEXT_BASE=0x7fe00000 -CONFIG_MALLOC_SIZE=0x2000000 +CONFIG_TEXT_BASE=0x0 +CONFIG_MALLOC_SIZE=0x0 CONFIG_MALLOC_TLSF=y -CONFIG_KALLSYMS=y -CONFIG_LONGHELP=y +CONFIG_RELOCATABLE=y CONFIG_HUSH_FANCY_PROMPT=y CONFIG_CMDLINE_EDITING=y CONFIG_AUTO_COMPLETE=y +CONFIG_BLSPEC=y +CONFIG_CONSOLE_ACTIVATE_NONE=y CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y -CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/guf-vincell/env" -CONFIG_DEBUG_INFO=y -CONFIG_CMD_EDIT=y -CONFIG_CMD_SLEEP=y -CONFIG_CMD_MSLEEP=y -CONFIG_CMD_SAVEENV=y -CONFIG_CMD_EXPORT=y -CONFIG_CMD_PRINTENV=y -CONFIG_CMD_READLINE=y -CONFIG_CMD_TIME=y -CONFIG_CMD_DIRNAME=y -CONFIG_CMD_LN=y -CONFIG_CMD_READLINK=y -CONFIG_CMD_TFTP=y -CONFIG_CMD_FILETYPE=y -CONFIG_CMD_ECHO_E=y -CONFIG_CMD_MEMINFO=y +CONFIG_POLLER=y +CONFIG_STATE=y +CONFIG_RESET_SOURCE=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_IMX_UART_PORT=2 +CONFIG_LONGHELP=y CONFIG_CMD_IOMEM=y -CONFIG_CMD_CRC=y -CONFIG_CMD_CRC_CMP=y -CONFIG_CMD_MD5SUM=y -CONFIG_CMD_FLASH=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_ARM_MMUINFO=y CONFIG_CMD_BOOTM_SHOW_TYPE=y CONFIG_CMD_BOOTM_VERBOSE=y CONFIG_CMD_BOOTM_INITRD=y CONFIG_CMD_BOOTM_OFTREE=y +CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y # CONFIG_CMD_BOOTU is not set -CONFIG_CMD_RESET=y CONFIG_CMD_GO=y -CONFIG_CMD_OFTREE=y -CONFIG_CMD_BAREBOX_UPDATE=y -CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_RESET=y +CONFIG_CMD_UIMAGE=y CONFIG_CMD_PARTITION=y +CONFIG_CMD_UBIFORMAT=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_LOADENV=y +CONFIG_CMD_PRINTENV=y CONFIG_CMD_MAGICVAR=y CONFIG_CMD_MAGICVAR_HELP=y -CONFIG_CMD_GPIO=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_FILETYPE=y +CONFIG_CMD_LN=y +CONFIG_CMD_MD5SUM=y CONFIG_CMD_UNCOMPRESS=y +CONFIG_CMD_LET=y +CONFIG_CMD_MSLEEP=y +CONFIG_CMD_READF=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_DHCP=y CONFIG_CMD_MIITOOL=y +CONFIG_CMD_PING=y +CONFIG_CMD_TFTP=y +CONFIG_CMD_ECHO_E=y +CONFIG_CMD_EDIT=y +CONFIG_CMD_SPLASH=y +CONFIG_CMD_READLINE=y +CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_CRC=y +CONFIG_CMD_CRC_CMP=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MM=y CONFIG_CMD_CLK=y +CONFIG_CMD_DETECT=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_SPI=y +CONFIG_CMD_WD=y +CONFIG_CMD_BAREBOX_UPDATE=y +CONFIG_CMD_OF_NODE=y +CONFIG_CMD_OF_PROPERTY=y +CONFIG_CMD_OFTREE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_STATE=y CONFIG_NET=y -CONFIG_CMD_DHCP=y -CONFIG_NET_NFS=y -CONFIG_CMD_PING=y +CONFIG_NET_NETCONSOLE=y CONFIG_NET_RESOLV=y +CONFIG_OFDEVICE=y +CONFIG_OF_BAREBOX_DRIVERS=y CONFIG_DRIVER_NET_FEC_IMX=y -# CONFIG_SPI is not set +CONFIG_AT803X_PHY=y +CONFIG_DRIVER_SPI_IMX=y CONFIG_I2C=y CONFIG_I2C_IMX=y CONFIG_MTD=y CONFIG_MTD_RAW_DEVICE=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_SST25L=y CONFIG_NAND=y -# CONFIG_NAND_ECC_SOFT is not set -# CONFIG_NAND_ECC_HW_SYNDROME is not set -# CONFIG_NAND_ECC_HW_NONE is not set +CONFIG_NAND_ALLOW_ERASE_BAD=y CONFIG_NAND_IMX=y +CONFIG_NAND_IMX_BBM=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_USB_HOST=y +CONFIG_USB_IMX_CHIPIDEA=y +CONFIG_USB_EHCI=y +CONFIG_USB_ULPI=y +CONFIG_USB_STORAGE=y CONFIG_MCI=y -CONFIG_MCI_STARTUP=y +CONFIG_MCI_MMC_BOOT_PARTITIONS=y CONFIG_MCI_IMX_ESDHC=y +CONFIG_STATE_DRV=y +CONFIG_EEPROM_AT25=y +CONFIG_EEPROM_AT24=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_IMX=y CONFIG_FS_TFTP=y -CONFIG_FS_NFS=y -CONFIG_FS_FAT=y -CONFIG_FS_FAT_WRITE=y -CONFIG_FS_FAT_LFN=y +CONFIG_FS_UBIFS=y +CONFIG_FS_UBIFS_COMPRESSION_LZO=y diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 06c29c8..54578e9 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -22,6 +22,7 @@ pbl-dtb-$(CONFIG_MACH_GK802) += imx6q-gk802.dtb.o pbl-dtb-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += kirkwood-guruplug-server-plus-bb.dtb.o pbl-dtb-$(CONFIG_MACH_GLOBALSCALE_MIRABOX) += armada-370-mirabox-bb.dtb.o pbl-dtb-$(CONFIG_MACH_GUF_SANTARO) += imx6q-guf-santaro.dtb.o +pbl-dtb-$(CONFIG_MACH_GUF_VINCELL) += imx53-guf-vincell.dtb.o imx53-guf-vincell-lt.dtb.o pbl-dtb-$(CONFIG_MACH_GW_VENTANA) += imx6q-gw54xx.dtb.o pbl-dtb-$(CONFIG_MACH_LENOVO_IX4_300D) += armada-xp-lenovo-ix4-300d-bb.dtb.o pbl-dtb-$(CONFIG_MACH_MARVELL_ARMADA_XP_GP) += armada-xp-gp-bb.dtb.o diff --git a/arch/arm/dts/imx53-guf-vincell-lt.dts b/arch/arm/dts/imx53-guf-vincell-lt.dts new file mode 100644 index 0000000..0a9bcb0 --- /dev/null +++ b/arch/arm/dts/imx53-guf-vincell-lt.dts @@ -0,0 +1,679 @@ +/* + * Copyright 2012 Pengutronix + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx53.dtsi" +#include <arm/imx53.dtsi> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Garz & Fricke VINCELL LT"; + compatible = "guf,imx53-vincell-lt", "fsl,imx53"; + + chosen { + linux,stdout-path = &uart2; + + environment { + compatible = "barebox,environment"; + device-path = &bareboxenv; + }; + }; + + memory { + reg = <0x70000000 0x20000000>; + }; + + clocks { + ckih1 { + clock-frequency = <0>; + }; + }; + + panel: panel { + compatible = "giantplus,gpg482739qs5", "simple-panel"; + power-supply = <®_panel>; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&disp0_out>; + }; + }; + }; + + display@di0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0>; + crtcs = <&ipu 0>; + interface-pix-fmt = "bgr24"; + status = "okay"; + fsl,panel = <&panel>; + + port@0 { + disp0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + + port@1 { + disp0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <&ldo3>; + enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + backlight-boot-off; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p2v: 3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + + reg_panel: vdd-panel { + compatible = "regulator-fixed"; + regulator-name = "VDD_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg: vbus-otg { + compatible = "regulator-fixed"; + regulator-name = "VBUS_OTG"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + }; + + reg_usbh1: vbus-h1 { + compatible = "regulator-fixed"; + regulator-name = "VBUS_H1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + bitrate = <100000>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + + pmic: dialog@48 { /* DA9053-3HHA1 PMIC */ + compatible = "dialog,da9053-aa", "dialog,da9052"; + reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1 { /* CORE */ + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2 { /* PRO */ + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3 { /* MEM */ + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4 { /* PERI */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3: ldo3 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + temperature-sensor@49 { + compatible = "ti,lm73"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c32", "st,m24c32"; + reg = <0x50>; + pagesize = <1>; + status = "okay"; + }; + + rtc: nxp@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + bitrate = <100000>; + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touch: edt-ft5x06@38 { + compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio2>; + interrupts = <14 0>; + }; +}; + +&ipu_di0_disp0 { + remote-endpoint = <&disp0_in>; +}; + +/* RS485 --> X39 [13..14] */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + /* RTS via GPIO */ + fsl,uart-has-rtscts; + rs485-enabled; + gpio = <&gpio7 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usbotg>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +/* Serial debug console --> X39 [2..5] */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* Serial debug console --> X11 [5..7] */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&nfc { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; + + partition@0 { + label = "barebox"; + reg = <0x0 0x80000>; + }; + + bareboxenv: partition@1 { + label = "barebox-environment"; + reg = <0x80000 0x80000>; + }; + + partition@2 { + label = "ubi"; + reg = <0x100000 0x0>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx53-vincell-lt { + pinctrl_can1: can1grp { + fsl,pins = < + MX53_PAD_GPIO_7__CAN1_TXCAN 0x00000000 + MX53_PAD_GPIO_8__CAN1_RXCAN 0x000001c4 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_EIM_A25__EMI_WEIM_A_25 0x000000e4 + MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x000000e4 + MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x000000a4 + MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x000000a4 + MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x000000a4 + MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x000000a4 + MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x000000a4 + MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x000000a4 + MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x000000a4 + MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x000000a4 + MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x000000a4 + MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x000000a4 + MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x000000a4 + MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x000000a4 + MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x000000a4 + MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x000000a4 + MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x000000a4 + MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x000000a4 + MX53_PAD_EIM_A24__EMI_WEIM_A_24 0x000001e4 + MX53_PAD_EIM_A23__EMI_WEIM_A_23 0x000001e4 + MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x000000e4 + MX53_PAD_EIM_A21__EMI_WEIM_A_21 0x000000e4 + MX53_PAD_EIM_A20__EMI_WEIM_A_20 0x000000a4 + MX53_PAD_EIM_A19__EMI_WEIM_A_19 0x000000a4 + MX53_PAD_EIM_A18__EMI_WEIM_A_18 0x000000a4 + MX53_PAD_EIM_A17__EMI_WEIM_A_17 0x000000a4 + MX53_PAD_EIM_A16__EMI_WEIM_A_16 0x000000a4 + MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 0x000000a4 + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x000000e4 + MX53_PAD_EIM_OE__EMI_WEIM_OE 0x000000a4 + MX53_PAD_EIM_RW__EMI_WEIM_RW 0x000000a4 + MX53_PAD_EIM_LBA__EMI_WEIM_LBA 0x000000e4 + MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 0x000000a4 + MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 0x000000a4 + MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 0x000001e4 + MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 0x000001e4 + MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT 0x000000e0 + MX53_PAD_LVDS0_TX3_P__GPIO7_22 0x80000000 + MX53_PAD_LVDS0_CLK_P__GPIO7_24 0x80000000 + MX53_PAD_LVDS0_TX2_P__GPIO7_26 0x80000000 + MX53_PAD_LVDS0_TX1_P__GPIO7_28 0x80000000 + MX53_PAD_LVDS0_TX0_P__GPIO7_30 0x80000000 + MX53_PAD_GPIO_1__GPIO1_1 0x000001c4 + MX53_PAD_GPIO_2__GPIO1_2 0x000001c4 + MX53_PAD_GPIO_10__GPIO4_0 0x000005e5 + MX53_PAD_GPIO_11__GPIO4_1 0x000005c5 + MX53_PAD_GPIO_12__GPIO4_2 0x000005e5 + MX53_PAD_GPIO_13__GPIO4_3 0x000005e5 + MX53_PAD_GPIO_14__GPIO4_4 0x000005e5 + MX53_PAD_GPIO_16__GPIO7_11 0x000001c4 + MX53_PAD_KEY_ROW2__GPIO4_11 0x000001e4 + MX53_PAD_PATA_DATA8__GPIO2_8 0x000001e4 + MX53_PAD_PATA_DATA12__PATA_DATA_12 0x000001e4 + MX53_PAD_PATA_DA_0__PATA_DA_0 0x000001e4 + + /* UART5: MDB --> X39 [2..5] (shared with RS232) */ + MX53_PAD_PATA_DATA9__GPIO2_9 0x00000000 /* MDB_WAKEUP_OUT */ + + /* UART3: RS485 --> X39 */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x00000000 /* RS485_TX_EN */ + + MX53_PAD_PATA_DATA4__GPIO2_4 0x00000000 /* FEC_nINT */ + + /* LCD panel */ + MX53_PAD_DI0_PIN4__GPIO4_20 0x000004c4 /* lcd power */ + MX53_PAD_PATA_DATA2__GPIO2_2 0x00000000 /* backlight power */ + MX53_PAD_PATA_DATA5__GPIO2_5 0x00000020 /* lcd enable */ + MX53_PAD_GPIO_9__PWM1_PWMO 0x00000000 /* LCD backlight PWM1 out */ + + /* ESDHC1 */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x00000000 /* ESDHC1 CD */ + + /* I2C system bus */ + /* MX53_PAD_CSI0_DAT8__GPIO5_26 0x00000000 */ + /* MX53_PAD_CSI0_DAT9__GPIO5_27 */ + + /* I2C external touch interface, disabled */ + /* MX53_PAD_GPIO_5__GPIO1_50x80000000 */ + /* MX53_PAD_GPIO_6__GPIO1_60x80000000 */ + + /* External Touch */ + MX53_PAD_PATA_DATA13__GPIO2_13 0x00000000 /* TOUCH_RESET */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x00000000 /* TOUCH_INT */ + MX53_PAD_PATA_DATA15__GPIO2_15 0x00000000 /* TOUCH_WAKE */ + + /* Audio */ + MX53_PAD_PATA_DATA7__GPIO2_7 0x00000000 /* Speaker on */ + + /* Clockout for external USB-phy and audiocodec */ + MX53_PAD_GPIO_3__CCM_CLKO2 0x00000000 + + /* GPIOs on keypad connector (X21) */ + MX53_PAD_CSI0_DAT11__GPIO5_29 0x00000000 /* Pin 3 */ + MX53_PAD_PATA_DIOW__GPIO6_17 0x00000000 /* Pin 4 */ + MX53_PAD_SD2_CMD__GPIO1_11 0x00000000 /* Pin 5 */ + MX53_PAD_PATA_DMACK__GPIO6_18 0x00000000 /* Pin 6 */ + MX53_PAD_CSI0_DAT7__GPIO5_25 0x00000000 /* Pin 7 */ + MX53_PAD_GPIO_4__GPIO1_4 0x00000000 /* Pin 8 */ + MX53_PAD_KEY_ROW4__GPIO4_15 0x00000000 /* Pin 9 */ + MX53_PAD_KEY_COL4__GPIO4_14 0x00000000 /* Pin 10 */ + MX53_PAD_KEY_ROW3__GPIO4_13 0x00000000 /* Pin 11 */ + MX53_PAD_KEY_COL3__GPIO4_12 0x00000000 /* Pin 12 */ + MX53_PAD_GPIO_19__GPIO4_5 0x00000000 /* Pin 13 */ + MX53_PAD_KEY_COL2__GPIO4_10 0x00000000 /* Pin 14 */ + MX53_PAD_KEY_COL1__GPIO4_8 0x00000000 /* Pin 15 */ + MX53_PAD_KEY_ROW0__GPIO4_7 0x00000000 /* Pin 16 */ + MX53_PAD_KEY_COL0__GPIO4_6 0x00000000 /* Pin 17 */ + MX53_PAD_KEY_ROW1__GPIO4_9 0x00000000 /* Pin 18 */ + + MX53_PAD_GPIO_17__GPIO7_12 0x000000e0 /* PMIC_nIRQ, 100 KOhm pull up */ + >; + }; + + pinctrl_disp0: disp0grp { + fsl,pins = < + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x000004c1 + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x000004c1 + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x000004c5 + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x000004c5 + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x000004c3 + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x000004c3 + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x000004c3 + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x000004c3 + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x000004c3 + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x000004c3 + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x000004c3 + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x000004c3 + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x000004c3 + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x000004c3 + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x000004c3 + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x000004c3 + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x000004c3 + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x000004c3 + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x000004c3 + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x000004c3 + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x000004c3 + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x000004c3 + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x000004c3 + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x000004c3 + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x000004c3 + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x000004c3 + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x000004c3 + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x000004c3 + >; + }; + + pinctrl_nand: nandgrp { + fsl,pins = < + MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x00000004 + MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x00000004 + MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x00000004 + MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x00000004 + MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0x000000e4 + MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0x000000e0 + MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x00000004 + MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 0x000001e4 + MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 0x000001e4 + MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 0x000001e4 + + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x000000a4 + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x000000a4 + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x000000a4 + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x000000a4 + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x000000a4 + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x000000a4 + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x000000a4 + MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0x000000a4 + MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 0x000000e4 + MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 0x000000e4 + MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 0x000000e4 + MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 0x000000e4 + MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 0x000000e4 + MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 0x000000e4 + MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 0x000000e4 + MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 0x000000e4 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x00000000 /* OC */ + MX53_PAD_GPIO_0__USBOH3_USBH1_PWR 0x00000000 /* PWR_EN */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x00000084 /* OC */ + /* can not be used, odd transistor logic */ + MX53_PAD_CSI0_MCLK__GPIO5_19 0x00000000 /* PWR_EN */ + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 + MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 + MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 + MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 + MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000 + MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000 + MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000 + MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX53_PAD_CSI0_DAT14__UART5_TXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT15__UART5_RXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT18__UART5_RTS 0x1c5 + MX53_PAD_CSI0_DAT19__UART5_CTS 0x1c5 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 + MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT16__UART4_RTS 0x1c5 + MX53_PAD_CSI0_DAT17__UART4_CTS 0x1c5 + >; + }; + }; +}; diff --git a/arch/arm/dts/imx53-guf-vincell.dts b/arch/arm/dts/imx53-guf-vincell.dts new file mode 100644 index 0000000..ffc157f --- /dev/null +++ b/arch/arm/dts/imx53-guf-vincell.dts @@ -0,0 +1,402 @@ +/* + * Copyright 2012 Pengutronix + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx53.dtsi" +#include <arm/imx53.dtsi> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Garz & Fricke VINCELL"; + compatible = "guf,imx53-vincell", "fsl,imx53"; + + chosen { + linux,stdout-path = &uart2; + }; + + memory { + reg = <0x70000000 0x20000000>; + }; + + clocks { + ckih1 { + clock-frequency = <0>; + }; + }; + + panel: panel { + compatible = "ampire,am800480r3tmqwa1h", "simple-panel"; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p2v: 3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + bitrate = <100000>; + status = "okay"; + + pmic: dialog@48 { /* DA9053-3HHA1 PMIC */ + compatible = "dialog,da9053-aa", "dialog,da9052"; + reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1 { /* CORE */ + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2 { /* PRO */ + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3 { /* MEM */ + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4 { /* PERI */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + temperature-sensor@49 { + compatible = "ti,lm73"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "st,m24c32"; + reg = <0x50>; + status = "disabled"; + }; + + rtc: nxp@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + bitrate = <100000>; + status = "disabled"; +}; + +&ldb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds0>; + status = "okay"; + + lvds-channel@0 { + status = "okay"; + fsl,data-mapping = "jeida"; + fsl,data-width = <24>; + + port@1 { + reg = <1>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx53-vincell { + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_DISP0_DAT8__GPIO4_29 0x80000000 + MX53_PAD_DISP0_DAT14__GPIO5_8 0x80000000 + MX53_PAD_DISP0_DAT15__GPIO5_9 0x80000000 + MX53_PAD_DISP0_DAT16__GPIO5_10 0x80000000 + MX53_PAD_DISP0_DAT17__GPIO5_11 0x80000000 + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x80000000 + MX53_PAD_CSI0_MCLK__GPIO5_19 0x80000000 + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x80000000 + MX53_PAD_CSI0_VSYNC__GPIO5_21 0x80000000 + MX53_PAD_CSI0_DAT4__GPIO5_22 0x80000000 + MX53_PAD_CSI0_DAT5__GPIO5_23 0x80000000 + MX53_PAD_CSI0_DAT6__GPIO5_24 0x80000000 + MX53_PAD_EIM_EB2__GPIO2_30 0x80000000 + MX53_PAD_GPIO_10__GPIO4_0 0x80000000 + MX53_PAD_GPIO_11__GPIO4_1 0x80000000 + MX53_PAD_GPIO_12__GPIO4_2 0x80000000 + MX53_PAD_GPIO_13__GPIO4_3 0x80000000 + MX53_PAD_PATA_DIOW__GPIO6_17 0x80000000 + MX53_PAD_PATA_DMACK__GPIO6_18 0x80000000 + MX53_PAD_PATA_RESET_B__GPIO7_4 0x80000000 + MX53_PAD_PATA_IORDY__GPIO7_5 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 + MX53_PAD_PATA_DATA0__GPIO2_0 0x80000000 + MX53_PAD_PATA_DATA1__GPIO2_1 0x80000000 + MX53_PAD_PATA_DATA2__GPIO2_2 0x000001c5 /* BL_ON */ + MX53_PAD_PATA_DATA3__GPIO2_3 0x000000c4 /* SEL6_8 */ + MX53_PAD_PATA_DATA4__PATA_DATA_4 0x80000000 + MX53_PAD_PATA_DATA5__GPIO2_5 0x000000c4 /* LCD_ENA */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 + MX53_PAD_PATA_DATA7__GPIO2_7 0x80000000 + MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 + MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000 + MX53_PAD_PATA_DATA10__GPIO2_10 0x80000000 + MX53_PAD_PATA_DATA11__GPIO2_11 0x80000000 + MX53_PAD_PATA_DATA13__GPIO2_13 0x80000000 + MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 + MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 + MX53_PAD_SD2_CLK__GPIO1_10 0x80000000 + MX53_PAD_SD2_DATA3__GPIO1_12 0x80000000 + MX53_PAD_GPIO_2__GPIO1_2 0x80000000 + MX53_PAD_GPIO_4__GPIO1_4 0x80000000 + MX53_PAD_GPIO_17__GPIO7_12 0x000000e0 /* PMIC_nIRQ, 100 KOhm pull up */ + MX53_PAD_GPIO_18__GPIO7_13 0x80000000 + MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x80000000 + MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x000000c4 /* PWM2 out */ + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC 0x80000000 + MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD 0x80000000 + MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS 0x80000000 + MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD 0x80000000 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 + MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 + MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 + MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 + MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 + >; + }; + + pinctrl_lvds0: lvds0grp { + fsl,pins = < + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 + >; + }; + }; +}; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index f8f6004..631333f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -29,7 +29,6 @@ config ARCH_TEXT_BASE default 0x97f00000 if MACH_CCMX51 default 0x4fc00000 if MACH_SABRELITE default 0x8fe00000 if MACH_TX53 - default 0x7fc00000 if MACH_GUF_VINCELL default 0x97f00000 if MACH_EFIKA_MX_SMARTBOOK default 0x17800000 if MACH_SABRESD default 0x4fc00000 if MACH_REALQ7 @@ -251,6 +250,10 @@ config MACH_FREESCALE_MX53_LOCO select I2C_IMX select MFD_MC13XXX +config MACH_GUF_VINCELL + bool "Garz-Fricke Vincell" + select ARCH_IMX53 + config MACH_TQMA53 bool "TQ i.MX53 TQMa53" select ARCH_IMX53 @@ -533,11 +536,6 @@ config MACH_TX53 help Say Y here if you are using the Ka-Ro tx53 board -config MACH_GUF_VINCELL - bool "Garz-Fricke Vincell" - select ARCH_IMX53 - select HAVE_DEFAULT_ENVIRONMENT_NEW - endchoice # ---------------------------------------------------------- diff --git a/images/Makefile.imx b/images/Makefile.imx index 6b44958..59b4563 100644 --- a/images/Makefile.imx +++ b/images/Makefile.imx @@ -70,6 +70,16 @@ CFG_start_imx53_vmx53.pblx.imximg = $(board)/freescale-mx53-vmx53/flash-header-i FILE_barebox-freescale-imx53-vmx53.img = start_imx53_vmx53.pblx.imximg image-$(CONFIG_MACH_FREESCALE_MX53_VMX53) += barebox-freescale-imx53-vmx53.img +pblx-$(CONFIG_MACH_GUF_VINCELL) += start_imx53_guf_vincell +CFG_start_imx53_guf_vincell.pblx.imximg = $(board)/guf-vincell/flash-header.imxcfg +FILE_barebox-guf-vincell.img = start_imx53_guf_vincell.pblx.imximg +image-$(CONFIG_MACH_GUF_VINCELL) += barebox-guf-vincell.img + +pblx-$(CONFIG_MACH_GUF_VINCELL) += start_imx53_guf_vincell_lt +CFG_start_imx53_guf_vincell_lt.pblx.imximg = $(board)/guf-vincell/flash-header.imxcfg +FILE_barebox-guf-vincell-lt.img = start_imx53_guf_vincell_lt.pblx.imximg +image-$(CONFIG_MACH_GUF_VINCELL) += barebox-guf-vincell-lt.img + pblx-$(CONFIG_MACH_TQMA53) += start_imx53_mba53_512mib CFG_start_imx53_mba53_512mib.pblx.imximg = $(board)/tqma53/flash-header-tq-tqma53-512mib.imxcfg FILE_barebox-tq-mba53-512mib.img = start_imx53_mba53_512mib.pblx.imximg -- 2.1.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
