Hi,

> 
> Applied all except this one.
> 
> This patch misses something. Compilation fails with:
> 
> Error: 
> /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:38.1-8
>  Label or path ecspi1 not found
> Error: 
> /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:75.1-5
>  Label or path fec not found
> Error: 
> /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:81.1-6
>  Label or path gpmi not found
> Error: 
> /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:115.1-6
>  Label or path i2c3 not found
> Error: 
> /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:134.5-6
>  syntax error
> 
> Sascha

Ups. I'll send a v2.

Mit freundlichen Grüßen / Kind regards,
        Stefan Christ

On Mon, Nov 09, 2015 at 07:45:26AM +0100, Sascha Hauer wrote:
> On Fri, Nov 06, 2015 at 11:21:58AM +0100, Stefan Christ wrote:
> > From: Christian Hemp <[email protected]>
> > 
> > Add Phytec phyCORE-i.MX6 SOM.
> >      - imx6dl-phytec-phycore-som-nand
> >         - 256GB RAM on 1 Bank with 32Bit
> >         - 10/100MBit Ethernet
> >         - NAND
> >         - SD
> >         - UART
> > 
> > Signed-off-by: Stefan Christ <[email protected]>
> > Signed-off-by: Christian Hemp <[email protected]>
> > ---
> 
> Applied all except this one.
> 
> This patch misses something. Compilation fails with:
> 
> Error: 
> /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:38.1-8
>  Label or path ecspi1 not found
> Error: 
> /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:75.1-5
>  Label or path fec not found
> Error: 
> /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:81.1-6
>  Label or path gpmi not found
> Error: 
> /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:115.1-6
>  Label or path i2c3 not found
> Error: 
> /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:134.5-6
>  syntax error
> 
> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to