The "num-cs" property does not encode flashes CS line but number of available CS signals. Fix wrong property parsing to ->cs by adding proper ->num_cs variable to host struct.
Signed-off-by: Sebastian Hesselbarth <[email protected]> Tested-by: Robert Jarzmik <[email protected]> --- drivers/mtd/nand/nand_mrvl_nfc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/nand_mrvl_nfc.c b/drivers/mtd/nand/nand_mrvl_nfc.c index 95abd4ddf243..5374e64965a2 100644 --- a/drivers/mtd/nand/nand_mrvl_nfc.c +++ b/drivers/mtd/nand/nand_mrvl_nfc.c @@ -153,6 +153,7 @@ struct mrvl_nand_host { int ecc_strength; int ecc_step; + int num_cs; /* avaiable CS signals */ int cs; /* selected chip 0/1 */ int use_ecc; /* use HW ECC ? */ int use_spare; /* use spare ? */ @@ -929,6 +930,7 @@ static struct mrvl_nand_host *alloc_nand_resource(struct device_d *dev) pdata = dev->platform_data; host = xzalloc(sizeof(*host)); + host->num_cs = 1; host->cs = 0; mtd = &host->mtd; mtd->priv = &host->chip; @@ -988,7 +990,7 @@ static int mrvl_nand_probe_dt(struct mrvl_nand_host *host) if (of_get_property(np, "marvell,nand-keep-config", NULL)) host->keep_config = 1; - of_property_read_u32(np, "num-cs", &host->cs); + of_property_read_u32(np, "num-cs", &host->num_cs); if (of_get_nand_on_flash_bbt(np)) host->flash_bbt = 1; -- 2.1.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
