On Wed, Aug 17, 2016 at 12:36:09AM +0300, Antony Pavlov wrote:
> At the moment barebox tplink-mr3020.dts file has almost
> the same content as linux ar9331_tl_mr3020.dts file
> so we can reuse linux dts-file and drop duplicated lines
> from barebox dts-file.
> 
> Signed-off-by: Antony Pavlov <[email protected]>
> ---
>  arch/mips/dts/tplink-mr3020.dts | 68 
> +----------------------------------------
>  1 file changed, 1 insertion(+), 67 deletions(-)

Applied, thanks

There is no difference between the two patches you sent, right?

Sascha


> 
> diff --git a/arch/mips/dts/tplink-mr3020.dts b/arch/mips/dts/tplink-mr3020.dts
> index 831fab8..1e843ee 100644
> --- a/arch/mips/dts/tplink-mr3020.dts
> +++ b/arch/mips/dts/tplink-mr3020.dts
> @@ -1,73 +1,7 @@
> -/dts-v1/;
> -
> -#include <dt-bindings/gpio/gpio.h>
> -
> -#include <mips/qca/ar9331.dtsi>
> +#include <mips/qca/ar9331_tl_mr3020.dts>
>  
>  / {
> -     model = "TP-Link TL-MR3020";
> -     compatible = "tplink,tl-mr3020";
> -
>       aliases {
>               spiflash = &spiflash;
>       };
> -
> -     memory@0 {
> -             device_type = "memory";
> -             reg = <0x00000000 0x2000000>;
> -     };
> -
> -     leds {
> -             compatible = "gpio-leds";
> -
> -             wlan {
> -                     label = "tp-link:green:wlan";
> -                     gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
> -                     default-state = "off";
> -             };
> -
> -             lan {
> -                     label = "tp-link:green:lan";
> -                     gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
> -                     default-state = "off";
> -             };
> -
> -             wps {
> -                     label = "tp-link:green:wps";
> -                     gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
> -                     default-state = "off";
> -             };
> -
> -             led3g {
> -                     label = "tp-link:green:3g";
> -                     gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
> -                     default-state = "off";
> -             };
> -     };
> -};
> -
> -&ref {
> -     clock-frequency = <25000000>;
> -};
> -
> -&uart {
> -     status = "okay";
> -};
> -
> -&gpio {
> -     status = "okay";
> -};
> -
> -&spi {
> -     num-chipselects = <1>;
> -     status = "okay";
> -
> -     /* Spansion S25FL032PIF SPI flash */
> -     spiflash: s25sl032p@0 {
> -             #address-cells = <1>;
> -             #size-cells = <1>;
> -             compatible = "spansion,s25sl032p", "jedec,spi-nor";
> -             spi-max-frequency = <104000000>;
> -             reg = <0>;
> -     };
>  };
> -- 
> 2.8.1
> 
> 
> _______________________________________________
> barebox mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to