The i.MX6 USB phy does not recognize disconnects of high speed
devices when the USBPHY_CTRL_ENHOSTDISCONDETECT is not set. The
phy does not work properly though when this bit is always set, so
implement the notify_(dis)concect() callbacks to set this bit
whenever a high speed device is connected and to clear it again
when the device is disconnected.

Signed-off-by: Sascha Hauer <[email protected]>
---
 drivers/usb/imx/imx-usb-phy.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/usb/imx/imx-usb-phy.c b/drivers/usb/imx/imx-usb-phy.c
index 2829ffc..9f46f8d 100644
--- a/drivers/usb/imx/imx-usb-phy.c
+++ b/drivers/usb/imx/imx-usb-phy.c
@@ -33,6 +33,7 @@
 #define USBPHY_CTRL_CLKGATE            (1 << 30)
 #define USBPHY_CTRL_ENUTMILEVEL3       (1 << 15)
 #define USBPHY_CTRL_ENUTMILEVEL2       (1 << 14)
+#define USBPHY_CTRL_ENHOSTDISCONDETECT (1 << 1)
 
 struct imx_usbphy {
        struct usb_phy usb_phy;
@@ -67,6 +68,30 @@ static int imx_usbphy_phy_init(struct phy *phy)
        return 0;
 }
 
+static int imx_usbphy_notify_connect(struct usb_phy *phy,
+                                    enum usb_device_speed speed)
+{
+       struct imx_usbphy *imxphy = container_of(phy, struct imx_usbphy, 
usb_phy);
+
+       if (speed == USB_SPEED_HIGH) {
+               writel(USBPHY_CTRL_ENHOSTDISCONDETECT,
+                      imxphy->base + USBPHY_CTRL + SET);
+       }
+
+       return 0;
+}
+
+static int imx_usbphy_notify_disconnect(struct usb_phy *phy,
+                                       enum usb_device_speed speed)
+{
+       struct imx_usbphy *imxphy = container_of(phy, struct imx_usbphy, 
usb_phy);
+
+       writel(USBPHY_CTRL_ENHOSTDISCONDETECT,
+              imxphy->base + USBPHY_CTRL + CLR);
+
+       return 0;
+}
+
 static struct phy *imx_usbphy_xlate(struct device_d *dev,
                                    struct of_phandle_args *args)
 {
@@ -112,6 +137,8 @@ static int imx_usbphy_probe(struct device_d *dev)
        dev->priv = imxphy;
 
        imxphy->usb_phy.dev = dev;
+       imxphy->usb_phy.notify_connect = imx_usbphy_notify_connect;
+       imxphy->usb_phy.notify_disconnect = imx_usbphy_notify_disconnect;
        imxphy->phy = phy_create(dev, NULL, &imx_phy_ops, NULL);
        if (IS_ERR(imxphy->phy)) {
                ret = PTR_ERR(imxphy->phy);
-- 
2.9.3


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to