Hi Alain,

On Thu, Oct 13, 2016 at 01:38:36PM +0000, Trostel Alain wrote:
> Hi,
> I would like to configure and enable the barebox state. My assumption is
> that I need to change the following device tree for my Phytec AM335x
> SOM:
> arch/arm/dts/am335x-phytec-phycore-som.dts
> But from the documentation
> (http://www.barebox.org/doc/latest/devicetree/bindings/barebox/barebox,state.html)
> it is not clear to me where exactly I need to add the variable node
> example.

You can put it anywhere in the device tree that is parsed by the device
parser. I would recommend putting it directly in the root node.

> Furthermore, I have check that the 'CONFIG_OFDEVICE' is
> enabled.
> So, where is the correct place to add the variable node configuration
> and what needs to be enabled in barebox?

for using the state framework you'll need:


If you want to use the bootchooser ontop of state you'll also need:



Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

barebox mailing list

Reply via email to