On Mon, 2016-10-17 at 09:50 +0200, Steffen Trumtrar wrote:
> Signed-off-by: Steffen Trumtrar <s.trumt...@pengutronix.de>
> ---
> arch/arm/dts/socfpga.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/dts/socfpga.dtsi b/arch/arm/dts/socfpga.dtsi
> index d16758fdab46..66d7f21dc6a3 100644
> --- a/arch/arm/dts/socfpga.dtsi
> +++ b/arch/arm/dts/socfpga.dtsi
> @@ -49,3 +49,13 @@
> &f2s_sdram_ref_clk {
> clock-frequency = <0>;
> };
> +
> +&watchdog0 {
> + resets = <&rst L4WD0_RESET>;
> + reset-names = "dw-wdt";
This is the official binding? The reset-names property is supposed to
be the name of the reset from the perspective of the device being
described, e.g. the watchdog. Not the name from the perspective of the
reset controller. Rather than "dw-wdt", the name should something like
"reset", which clearly doesn't add much information, which is why the
reset-names property is supposed to be optional.
> +};
> +
> +&watchdog1 {
> + resets = <&rst L4WD1_RESET>;
> + reset-names = "dw-wdt";
> +};
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
