Signed-off-by: Andrey Smirnov <[email protected]>
---
 arch/arm/mach-at91/include/mach/board.h |  6 ++-
 drivers/usb/host/ohci-at91.c            | 84 ++++++++++++++++++++++++++++++++-
 2 files changed, 86 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/include/mach/board.h 
b/arch/arm/mach-at91/include/mach/board.h
index 491b220..5d76e00 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -32,11 +32,13 @@
 
 void at91_set_main_clock(unsigned long rate);
 
+#define AT91_MAX_USBH_PORTS    3
+
  /* USB Host */
 struct at91_usbh_data {
        u8              ports;          /* number of ports on root hub */
-       int             vbus_pin[2];    /* port power-control pin */
-       u8      vbus_pin_active_low[2]; /* vbus polarity */
+       int             vbus_pin[AT91_MAX_USBH_PORTS];  /* port power-control 
pin */
+       u8      vbus_pin_active_low[AT91_MAX_USBH_PORTS];       /* vbus 
polarity */
 };
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index f413616..54fe45f 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -23,10 +23,18 @@
 #include <usb/usb.h>
 #include <usb/usb_defs.h>
 #include <errno.h>
+#include <gpio.h>
+#include <of_gpio.h>
 #include <io.h>
 
+#include <mach/board.h>
+
 #include "ohci.h"
 
+#define at91_for_each_port(index)                                      \
+       for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
+
+
 struct ohci_at91_priv {
        struct device_d *dev;
        struct clk *iclk;
@@ -59,6 +67,53 @@ static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
        clk_disable(ohci_at91->iclk);
 }
 
+static void at91_ohci_probe_dt(struct device_d *dev)
+{
+       u32 ports;
+       int i, ret, gpio;
+       enum of_gpio_flags flags;
+       struct at91_usbh_data *pdata;
+       struct device_node *np = dev->device_node;
+
+       pdata = xzalloc(sizeof(*pdata));
+       dev->platform_data = pdata;
+
+       if (!of_property_read_u32(np, "num-ports", &ports))
+               pdata->ports = ports;
+
+       at91_for_each_port(i) {
+               /*
+                * do not configure PIO if not in relation with
+                * real USB port on board
+                */
+               if (i >= pdata->ports) {
+                       pdata->vbus_pin[i] = -EINVAL;
+                       continue;
+               }
+
+               gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i,
+                                              &flags);
+               pdata->vbus_pin[i] = gpio;
+               if (!gpio_is_valid(gpio))
+                       continue;
+               pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW;
+
+               ret = gpio_request(gpio, "ohci_vbus");
+               if (ret) {
+                       dev_err(dev, "can't request vbus gpio %d\n", gpio);
+                       continue;
+               }
+               ret = gpio_direction_output(gpio,
+                                           !pdata->vbus_pin_active_low[i]);
+               if (ret) {
+                       dev_err(dev, "can't put vbus gpio %d as output %d\n",
+                               gpio, !pdata->vbus_pin_active_low[i]);
+                       gpio_free(gpio);
+                       continue;
+               }
+       }
+}
+
 static int at91_ohci_probe(struct device_d *dev)
 {
        int ret;
@@ -68,6 +123,9 @@ static int at91_ohci_probe(struct device_d *dev)
        dev->priv = ohci_at91;
        ohci_at91->dev = dev;
 
+       if (dev->device_node)
+               at91_ohci_probe_dt(dev);
+
        io = dev_get_resource(dev, IORESOURCE_MEM, 0);
        if (IS_ERR(io)) {
                dev_err(dev, "Failed to get IORESOURCE_MEM\n");
@@ -75,13 +133,13 @@ static int at91_ohci_probe(struct device_d *dev)
        }
        ohci_at91->regs = IOMEM(io->start);
 
-       ohci_at91->iclk = clk_get(NULL, "ohci_clk");
+       ohci_at91->iclk = clk_get(dev, "ohci_clk");
        if (IS_ERR(ohci_at91->iclk)) {
                dev_err(dev, "Failed to get 'iclk'\n");
                return PTR_ERR(ohci_at91->iclk);
        }
 
-       ohci_at91->fclk = clk_get(NULL, "uhpck");
+       ohci_at91->fclk = clk_get(dev, "uhpck");
        if (IS_ERR(ohci_at91->fclk)) {
                dev_err(dev, "Failed to get 'fclk'\n");
                return PTR_ERR(ohci_at91->fclk);
@@ -107,6 +165,7 @@ static int at91_ohci_probe(struct device_d *dev)
 
 static void at91_ohci_remove(struct device_d *dev)
 {
+       struct at91_usbh_data *pdata = dev->platform_data;
        struct ohci_at91_priv *ohci_at91 = dev->priv;
 
        /*
@@ -118,11 +177,32 @@ static void at91_ohci_remove(struct device_d *dev)
         * Stop the USB clocks.
         */
        at91_stop_clock(ohci_at91);
+
+       if (pdata) {
+               bool active_low;
+               int  i, gpio;
+
+               at91_for_each_port(i) {
+                       gpio = pdata->vbus_pin[i];
+                       active_low = pdata->vbus_pin_active_low[i];
+
+                       if (gpio_is_valid(gpio)) {
+                               gpio_set_value(gpio, active_low);
+                               gpio_free(gpio);
+                       }
+               }
+       }
 }
 
+static const struct of_device_id at91_ohci_dt_ids[] = {
+       { .compatible = "atmel,at91rm9200-ohci" },
+       { /* sentinel */ }
+};
+
 static struct driver_d at91_ohci_driver = {
        .name = "at91_ohci",
        .probe = at91_ohci_probe,
        .remove = at91_ohci_remove,
+       .of_compatible = DRV_OF_COMPAT(at91_ohci_dt_ids),
 };
 device_platform_driver(at91_ohci_driver);
-- 
2.9.3


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to