On Mon, Mar 13, 2017 at 02:16:06PM +0100, Michael Olbrich wrote:
> ---
>
> I played with the numbers a bit. This hardware has a 18 Hz tick :-/.
> That's not really useful so just skipping the clocksource is probably the
> best solution.
>
> Michael
>
> drivers/clocksource/efi.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/clocksource/efi.c b/drivers/clocksource/efi.c
> index 89906c452eb7..fb5b7ca63de9 100644
> --- a/drivers/clocksource/efi.c
> +++ b/drivers/clocksource/efi.c
> @@ -71,6 +71,10 @@ static int efi_cs_init(struct clocksource *cs)
> uint64_t nb_100ns;
>
> freq = ticks_freq_x86();
> + if (freq == 0) {
> + BS->close_event(efi_cs_evt);
> + return -ENODEV;
> + }
> nb_100ns = 10 * 1000 * 1000 / freq;
> pr_warn("EFI Event timer too slow freq = %llu Hz\n", freq);
> efiret = BS->set_timer(efi_cs_evt, EFI_TIMER_PERIODIC,
> nb_100ns);
Since the patch this fixup is for is already in master: Can you provide
a proper, non-fixup patch?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
