On Fri, Jun 02, 2017 at 03:18:08PM +0200, Michael Grzeschik wrote: > This adds support support for the i.MX6UL Technexion Pico Hobbit. > The board comes with different amounts of RAM. We create one image > for the 256MB and one for the 512MB variant. > > Signed-off-by: Michael Grzeschik <[email protected]> > --- > v1 -> v2: - removed already prepared clock setup > > + > +&usdhc1 { > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "barebox"; > + reg = <0x0 0xc0000>; > + }; > + > + environment_usdhc1: partition@c0000 { > + label = "barebox-environment"; > + reg = <0xc0000 0x40000>; > + }; > +}; > + > +&fec2 { > + /* > + There are two possible ways to start the phy. Let the hardware > + reset it properly or reset it a second time in software. > + Unfortunetly the phy needs some microseconds after reset to > + settle down. As there is no property like > + phy-post-reset-delay, we better leave the reset to the > + hardware. > + */ > + /delete-property/ phy-reset-gpios; > + /delete-property/ phy-reset-duration;
Recent Kernels support phy-reset-post-delay. Can we just add support for it in barebox aswell? -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
