On Mon, May 14, 2018 at 05:26:49AM +0000, Alexander Kurz wrote:
> Signed-off-by: Alexander Kurz <[email protected]>
> ---
> arch/arm/mach-imx/imx50.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/mach-imx/imx50.c b/arch/arm/mach-imx/imx50.c
> index d6ff6dfc2..6d121eaf8 100644
> --- a/arch/arm/mach-imx/imx50.c
> +++ b/arch/arm/mach-imx/imx50.c
> @@ -83,7 +83,7 @@ int imx50_devices_init(void)
>
> void imx50_init_lowlevel_early(unsigned int cpufreq_mhz)
> {
> - void __iomem *ccm = (void __iomem *)MX50_CCM_BASE_ADDR;
> + void __iomem *ccm = IOMEM(MX50_CCM_BASE_ADDR);
> u32 r;
>
> imx5_init_lowlevel();
> @@ -113,11 +113,11 @@ void imx50_init_lowlevel_early(unsigned int cpufreq_mhz)
> writel(0x4, ccm + MX5_CCM_CCSR);
>
> if (cpufreq_mhz == 400)
> - imx5_setup_pll_400((void __iomem *)MX50_PLL1_BASE_ADDR);
> + imx5_setup_pll_400(IOMEM(MX50_PLL1_BASE_ADDR));
> else
> - imx5_setup_pll_800((void __iomem *)MX50_PLL1_BASE_ADDR);
> + imx5_setup_pll_800(IOMEM(MX50_PLL1_BASE_ADDR));
>
> - imx5_setup_pll_216((void __iomem *)MX50_PLL3_BASE_ADDR);
> + imx5_setup_pll_216(IOMEM(MX50_PLL3_BASE_ADDR));
>
> /* Switch peripheral to PLL3 */
> writel(0x00015154, ccm + MX5_CCM_CBCMR);
> @@ -126,7 +126,7 @@ void imx50_init_lowlevel_early(unsigned int cpufreq_mhz)
> /* make sure change is effective */
> while (readl(ccm + MX5_CCM_CDHIPR));
>
> - imx5_setup_pll_400((void __iomem *)MX50_PLL2_BASE_ADDR);
> + imx5_setup_pll_400(IOMEM(MX50_PLL2_BASE_ADDR));
>
> /* Switch peripheral to PLL2 */
> r = 0x02800145 |
> --
> 2.11.0
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
