Signed-off-by: Roland Hieber <[email protected]> --- Documentation/boards/imx/wandboard.rst | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/Documentation/boards/imx/wandboard.rst b/Documentation/boards/imx/wandboard.rst index 574318a009..8283b47260 100644 --- a/Documentation/boards/imx/wandboard.rst +++ b/Documentation/boards/imx/wandboard.rst @@ -8,14 +8,15 @@ the Wandboard Dual (i.MX6DL, 1GiB DDR3) and Wandboard Quad (i.MX6Q, 2GiB DDR3). The device boots from the SD card slot on the System-on-Module board, it will not boot from the slot on the carrier board. -To boot barebox on any wandboard, build imx_v7_defconfig -and copy the barebox imx-image to the i.MX boot location of a SD card, e.g. -dd bs=1024 skip=1 seek=1 if=images/barebox-imx6-wandboard.img of=/dev/mmcblk0 +To boot barebox on any wandboard, build ``imx_v7_defconfig`` +and copy the barebox imx-image to the i.MX boot location of a SD card, e.g.:: + + dd bs=1024 skip=1 seek=1 if=images/barebox-imx6-wandboard.img of=/dev/mmcblk0 Only one image exists, supporting all three Wandboard variants, barebox will detect the Wandboard variant depending on the SoC variant. -This image is only usable for SD-boot. It will not boot via imx-usb-loader. +This image is only usable for SD boot. It will not boot via imx-usb-loader. Connect to the serial port using a null-modem cable to get console access. -For further documentation, including board schematics see http://wandboard.org/ +For further documentation, including board schematics, see http://wandboard.org/. -- 2.17.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
