Hello Leigh,
On Tue, Jul 31, 2018 at 02:21:04PM +0100, Leigh Brown wrote:
> Have I missed any steps? Any help would be greatly appreciated.
Looks good.
Which revision are you on (i.e. git rev-parse @ in your barebox copy)?
What is currently running on the device?
Do you get an U when applying this patch?:
diff --git a/arch/arm/boards/globalscale-mirabox/lowlevel.c
b/arch/arm/boards/globalscale-mirabox/lowlevel.c
index 69786c88fb22..6abf96592496 100644
--- a/arch/arm/boards/globalscale-mirabox/lowlevel.c
+++ b/arch/arm/boards/globalscale-mirabox/lowlevel.c
@@ -31,5 +31,6 @@ ENTRY_FUNCTION(start_globalscale_mirabox, r0, r1, r2)
fdt = __dtb_armada_370_mirabox_bb_start +
get_runtime_offset();
+ writel(0x55, 0xd0012000);
armada_370_xp_barebox_entry(fdt);
}
I just tried 7ba0f2d29959256025ece9ae961a6c3421445a7f on my ReadyNAS 104
which has an armada370, too.
I hangs when using second-stage booting from the Vendor U-Boot after:
barebox 2018.07.0-00139-g7ba0f2d29959-dirty #50 Mon Aug 6 20:27:11 CEST
2018
Board: Marvell Armada 370/XP
SoC: Marvell 6710 rev 1
mdio_bus: miibus0: probed
eth1: got preset MAC address: 28:c6:8e:36:df:57
When enabling DEBUG_INITCALLS I got a prompt, hmm. Didn't debug that
further.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
