Add minimal support for reset-gpios.
Example DT that uses this:
mdio {
#address-cells = <1>;
#size-cells = <0>;
reset-gpios = <&pioE 17 GPIO_ACTIVE_LOW>;
reset-delay-us = <1000>;
ethphy0: ethernet-phy@1 {
reg = <3>;
};
};
This was required to get the Davicom PHY operational on
my proprietary board.
I added the minimal mdiobus_reset() calls.
Linux kernel will take care that the PHY is reset upon removal etc.
Another options was to use a bus reset, but then a macb (the
driver used on my board) would be required.
The reset-gpios solution is general and matches phy-bindings-txt
Signed-off-by: Sam Ravnborg <[email protected]>
---
drivers/net/phy/mdio_bus.c | 58 +++++++++++++++++++++++++++++++++++++++++++---
include/linux/phy.h | 5 ++++
2 files changed, 60 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index d209716a1..85deca869 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -17,6 +17,8 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <common.h>
+#include <of_gpio.h>
+#include <gpio.h>
#include <driver.h>
#include <init.h>
#include <clock.h>
@@ -25,6 +27,8 @@
#include <linux/phy.h>
#include <linux/err.h>
+#define DEFAULT_GPIO_RESET_DELAY 10 /* us */
+
LIST_HEAD(mii_bus_list);
int mdiobus_detect(struct device_d *dev)
@@ -83,6 +87,42 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio,
struct device_node *chi
}
/**
+ * of_mdioibus_register_reset - register optional reset-gpios
+ * @mdio: pointer to mii_bus structure
+ * @np: pointer to device_node of MDIO bus.
+ *
+ * Read optional reset-gpios from mido node in DT
+ */
+static void of_mdiobus_register_reset(struct mii_bus *mdio,
+ struct device_node *np)
+{
+ enum of_gpio_flags of_flags;
+ u32 reset_delay;
+ int gpio;
+
+ reset_delay = DEFAULT_GPIO_RESET_DELAY;
+ of_property_read_u32(np, "reset-delay-us", &reset_delay);
+
+ gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &of_flags);
+ if (gpio_is_valid(gpio)) {
+ unsigned long flags;
+ char *name;
+
+ name = basprintf("%s-reset", dev_name(&mdio->dev));
+ flags = GPIOF_OUT_INIT_INACTIVE;
+
+ if (of_flags & OF_GPIO_ACTIVE_LOW)
+ flags |= GPIOF_ACTIVE_LOW;
+
+ if (gpio_request_one(gpio, flags, name) >= 0) {
+ mdio->reset_gpio = gpio;
+ mdio->reset_delay = reset_delay;
+ }
+ }
+
+}
+
+/**
* of_mdiobus_register - Register mii_bus and create PHYs from the device tree
* @mdio: pointer to mii_bus structure
* @np: pointer to device_node of MDIO bus.
@@ -96,6 +136,8 @@ static int of_mdiobus_register(struct mii_bus *mdio, struct
device_node *np)
u32 addr;
int ret;
+ of_mdiobus_register_reset(mdio, np);
+
/* Loop over the child nodes and register a phy_device for each one */
for_each_available_child_of_node(np, child) {
ret = of_property_read_u32(child, "reg", &addr);
@@ -147,9 +189,6 @@ int mdiobus_register(struct mii_bus *bus)
return -EINVAL;
}
- if (bus->reset)
- bus->reset(bus);
-
list_add_tail(&bus->list, &mii_bus_list);
pr_info("%s: probed\n", dev_name(&bus->dev));
@@ -157,6 +196,10 @@ int mdiobus_register(struct mii_bus *bus)
if (bus->dev.device_node)
of_mdiobus_register(bus, bus->dev.device_node);
+ mdiobus_reset(bus);
+ if (bus->reset)
+ bus->reset(bus);
+
return 0;
}
EXPORT_SYMBOL(mdiobus_register);
@@ -190,6 +233,15 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int
addr)
}
EXPORT_SYMBOL(mdiobus_scan);
+void mdiobus_reset(const struct mii_bus *bus)
+{
+ if (bus->reset_gpio) {
+ gpio_set_active(bus->reset_gpio, 1);
+ udelay(bus->reset_delay);
+ gpio_set_active(bus->reset_gpio, 0);
+ }
+}
+EXPORT_SYMBOL(mdiobus_reset);
/**
*
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ac750f5c3..d5b153d25 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -99,6 +99,10 @@ struct mii_bus {
/* PHY addresses to be ignored when probing */
u32 phy_mask;
+ /* Optional reset of all PHY's on the bus */
+ int reset_gpio;
+ int reset_delay;
+
struct list_head list;
bool is_multiplexed;
@@ -108,6 +112,7 @@ struct mii_bus {
int mdiobus_register(struct mii_bus *bus);
void mdiobus_unregister(struct mii_bus *bus);
struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
+void mdiobus_reset(const struct mii_bus *bus);
extern struct list_head mii_bus_list;
--
2.12.0
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
