Hi all.
I try to boot my target using NFS - but something does not work.
I have a server (192.168.86.201) where I have exported
an nfs mount like this:
$ sudo exportfs
/nfsboot/arm9 <world>
$ cat /etc/exports.d/nfsboot.exports
/nfsboot/arm9 *(insecure,no_subtree_check,no_root_squash,rw,nohide)
On my barebox target I can then mount the nfs like this:
barebox: mkdir /mnt
barebox: /mnt/nfs
barebox: mount -t nfs 192.168.86.201:/nfsboot/arm9
barebox: mount
none on / type ramfs
none on /dev type devfs
192.168.86.201:/nfsboot/arm9 on /mnt/nfs type nfs
barebox: ls /mnt/nfs <= shows the file I have on the server
Then when I try to boot from nfs I get the following output:
barebox: boot nfs://192.168.86.201/nfsboot/arm9/
eth0: DHCP client bound to address 192.168.86.20
T T T T T T T T T T T T T T could not open /.tftp_tmp_path/zImage-at91sam9263ek
When I grep the barebox source I can only find 'tftp_tmp_path' in some
tftp code.
It looks like it somehow revert back to tftp despite I have specified nfs.
I hope there is something trivial I do wrong.
Any hints?
Sam
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
