Exemplary previous behaviour: vddio: 3100mV (BO -200mV), Linreg enabled, Linreg offset: -1, FET enabled vdda: 1800mV (BO -175mV), Linreg disabled, Linreg offset: -1, FET enabled vddd: 1200mV (BO -175mV), Linreg enabled, Linreg offset: -1, FET disabled vddmem: 1500mV (BO -25mV), Linreg disabled
After this patch this looks much cleaner: vddio: 3100mV (BO -200mV), Linreg enabled, Linreg offset: -1, FET enabled vdda: 1800mV (BO -175mV), Linreg disabled, Linreg offset: -1, FET enabled vddd: 1200mV (BO -175mV), Linreg enabled, Linreg offset: -1, FET disabled vddmem: 1500mV (BO - 25mV), Linreg disabled Signed-off-by: Roland Hieber <[email protected]> --- arch/arm/mach-mxs/power-init.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-mxs/power-init.c b/arch/arm/mach-mxs/power-init.c index b3b0db666f..ca7c349d7f 100644 --- a/arch/arm/mach-mxs/power-init.c +++ b/arch/arm/mach-mxs/power-init.c @@ -39,28 +39,28 @@ static void mxs_power_status(void) #define __REG_BITS(value, fieldname) (((value) & fieldname##_MASK) >> fieldname##_OFFSET) - printf("vddio: %dmV (BO -%dmV), Linreg enabled, Linreg offset: %d, FET %sabled\n", + printf("vddio: %4dmV (BO -%3dmV), Linreg enabled, Linreg offset: %1d, FET %sabled\n", __REG_BITS(vddio, POWER_VDDIOCTRL_TRG) * 50 + 2800, __REG_BITS(vddio, POWER_VDDIOCTRL_BO_OFFSET) * 50, linregofs[__REG_BITS(vddio, POWER_VDDIOCTRL_LINREG_OFFSET)], - (vddio & POWER_VDDIOCTRL_DISABLE_FET) ? "dis" : "en"); - printf("vdda: %dmV (BO -%dmV), Linreg %sabled, Linreg offset: %d, FET %sabled\n", + (vddio & POWER_VDDIOCTRL_DISABLE_FET) ? "dis" : " en"); + printf("vdda: %4dmV (BO -%3dmV), Linreg %sabled, Linreg offset: %1d, FET %sabled\n", __REG_BITS(vdda, POWER_VDDACTRL_TRG) * 25 + 1500, __REG_BITS(vdda, POWER_VDDACTRL_BO_OFFSET) * 25, - (vdda & POWER_VDDACTRL_ENABLE_LINREG) ? "en" : "dis", + (vdda & POWER_VDDACTRL_ENABLE_LINREG) ? " en" : "dis", linregofs[__REG_BITS(vdda, POWER_VDDACTRL_LINREG_OFFSET)], - (vdda & POWER_VDDACTRL_DISABLE_FET) ? "dis" : "en"); - printf("vddd: %dmV (BO -%dmV), Linreg %sabled, Linreg offset: %d, FET %sabled\n", + (vdda & POWER_VDDACTRL_DISABLE_FET) ? "dis" : " en"); + printf("vddd: %4dmV (BO -%3dmV), Linreg %sabled, Linreg offset: %1d, FET %sabled\n", __REG_BITS(vddd, POWER_VDDDCTRL_TRG) * 25 + 800, __REG_BITS(vddd, POWER_VDDDCTRL_BO_OFFSET) * 25, - (vddd & POWER_VDDDCTRL_ENABLE_LINREG) ? "en" : "dis", + (vddd & POWER_VDDDCTRL_ENABLE_LINREG) ? " en" : "dis", linregofs[__REG_BITS(vddd, POWER_VDDDCTRL_LINREG_OFFSET)], - (vddd & POWER_VDDDCTRL_DISABLE_FET) ? "dis" : "en"); - printf("vddmem: %dmV (BO -%dmV), Linreg %sabled\n", + (vddd & POWER_VDDDCTRL_DISABLE_FET) ? "dis" : " en"); + printf("vddmem: %4dmV (BO -%3dmV), Linreg %sabled\n", __REG_BITS(vddmem, POWER_VDDMEMCTRL_TRG) * 25 + 1100, /* Note: this area is reserved on i.MX23, yielding 0: */ __REG_BITS(vddmem, MX28_POWER_VDDMEMCTRL_BO_OFFSET) * 25, - (vddmem & POWER_VDDMEMCTRL_ENABLE_LINREG) ? "en" : "dis"); + (vddmem & POWER_VDDMEMCTRL_ENABLE_LINREG) ? " en" : "dis"); } /* -- 2.18.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
