Upstream .dts file specifies NO_PAD_CTRL for USHB1 pins, so add proper configuration until that is resolved.
Signed-off-by: Andrey Smirnov <[email protected]> --- arch/arm/dts/imx51-babbage.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/dts/imx51-babbage.dts b/arch/arm/dts/imx51-babbage.dts index b5c81a77c..051629f0a 100644 --- a/arch/arm/dts/imx51-babbage.dts +++ b/arch/arm/dts/imx51-babbage.dts @@ -71,5 +71,25 @@ MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ >; }; + + pinctrl_usbh1: usbh1grp { + /* + * Ditto for USBH1 iomux settings. + */ + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + >; + }; }; }; -- 2.17.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
