Do not try to probe PHY devices if they are masked via phy_mask of the corresponding bus. This way we won't try adding devices that are unlikely to be proper PHYs by default. With this change it is still remain to be possible to add such a device to the bus explicitly either using "miitool" or calling phy_device_create() explicilty.
Signed-off-by: Andrey Smirnov <[email protected]> --- drivers/net/phy/phy.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 19d458e07..b985b7567 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -234,6 +234,10 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr) u32 phy_id = 0; int r; + /* skip masked out PHY addresses */ + if (bus->phy_mask & BIT(addr)) + return ERR_PTR(-ENODEV); + r = get_phy_id(bus, addr, &phy_id); if (r) return ERR_PTR(r); @@ -440,9 +444,6 @@ int phy_device_connect(struct eth_device *edev, struct mii_bus *bus, int addr, } for (i = 0; i < PHY_MAX_ADDR && !edev->phydev; i++) { - /* skip masked out PHY addresses */ - if (bus->phy_mask & (1 << i)) - continue; phy = mdiobus_scan(bus, i); if (IS_ERR(phy)) -- 2.17.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
