at91_add_device_mci() was missing configuration of PIOA6
when configuring mci1.
With this fix we can read data from SD card with at91sam9263ek,
when built without DT.
Building without a DT is required when we do a bootstrap build.
The other at91samxxx_devices was checked - only the 9263 was
missing the CLK configuration for mci1.
Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
---
arch/arm/mach-at91/at91sam9263_devices.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c
b/arch/arm/mach-at91/at91sam9263_devices.c
index a67345f05..c7e4962a9 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -396,6 +396,9 @@ void at91_add_device_mci(short mmc_id, struct
atmel_mci_platform_data *data)
} else { /* MCI1 */
start = AT91SAM9263_BASE_MCI1;
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA6, 0);
+
if (data->slot_b) {
/* CMD */
at91_set_A_periph(AT91_PIN_PA21, 1);
--
2.12.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
